Journal article · 2017 · Open access

Liquid Metal Embrittlement of Hot Stamped Galvannealed Boron Steel Sheet – Effect of Heating Time on Crack Formation –

Masaru Takahashi, Masahiro Nakata, Kazuhito Imai, Nobusato Kojima, N. Ōtsuka

ISIJ International, 57(6), 1094–1101 · Published 1 January 2017 · DOI 10.2355/isijinternational.isijint-2016-730

Open PDFView at the publisherCite this paper

In brief

“Liquid Metal Embrittlement of Hot Stamped Galvannealed Boron Steel Sheet – Effect of Heating Time on Crack Formation –” is a 2017 journal article by Masaru Takahashi and 4 co-authors, published in ISIJ International. OpenAlex counts 48 citations as of 22 November 2026. It is open access: the full text is free to read at ISIJ International.

Citations
48
Most cited in
2022 (8)
Field-weighted impact
2.52
References
9
Authors
5

Abstract

Galvannealed (GA) boron steel sheets were subjected to direct hot stamping tests (V-bending) to investigate crack formation behavior. Specimens were heated at 1173 K (900°C) in a combustion gas furnace and hot stamped on a cooled V-shaped die. The heating time was varied to alter the composition, phase, and microstructure of the coating layer. Generally, the reaction zone between the zinc coating layer and metal substrate could not be observed by scanning electron microscopy. For certain specimens, crack penetration occurred along primary austenitic grain boundaries of the substrate, with zinc enrichment observed at the crack sidewalls suggesting the occurrence of liquid metal embrittlement (LME) of the base metal. LME-induced cracking resulted when the coating layer corresponded to a biphasic Fe–Zn ferrite/liquid zinc structure of the binary Fe–Zn phase diagram during heating in the furnace. For cracked specimens, the maximum crack depth increased with increasing total X-ray diffraction intensity of δ and η phases in the coating layer of hot-stamped samples, being positively correlated with the amount of “liquid zinc” in the coating layer.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Takahashi, M., Nakata, M., Imai, K., Kojima, N., & Ōtsuka, N. (2017). Liquid Metal Embrittlement of Hot Stamped Galvannealed Boron Steel Sheet – Effect of Heating Time on Crack Formation –. ISIJ International, 57(6), 1094–1101. https://doi.org/10.2355/isijinternational.isijint-2016-730

MLA 9

Takahashi, Masaru, et al. “Liquid Metal Embrittlement of Hot Stamped Galvannealed Boron Steel Sheet – Effect of Heating Time on Crack Formation –.” ISIJ International, vol. 57, no. 6, 2017, pp. 1094–1101. https://doi.org/10.2355/isijinternational.isijint-2016-730.

Chicago

Takahashi, Masaru, Masahiro Nakata, Kazuhito Imai, Nobusato Kojima, and N. Ōtsuka. 2017. “Liquid Metal Embrittlement of Hot Stamped Galvannealed Boron Steel Sheet – Effect of Heating Time on Crack Formation –.” ISIJ International 57 (6): 1094–1101. https://doi.org/10.2355/isijinternational.isijint-2016-730.

Harvard

Takahashi, M. et al. (2017) ‘Liquid Metal Embrittlement of Hot Stamped Galvannealed Boron Steel Sheet – Effect of Heating Time on Crack Formation –’, ISIJ International, 57(6), pp. 1094–1101. doi:10.2355/isijinternational.isijint-2016-730.

IEEE

M. Takahashi, M. Nakata, K. Imai, N. Kojima, and N. Ōtsuka, “Liquid Metal Embrittlement of Hot Stamped Galvannealed Boron Steel Sheet – Effect of Heating Time on Crack Formation –,” ISIJ International, vol. 57, no. 6, pp. 1094–1101, 2017, doi: 10.2355/isijinternational.isijint-2016-730.

BibTeX

@article{takahashi2017liquid,
  title     = {{Liquid Metal Embrittlement of Hot Stamped Galvannealed Boron Steel Sheet – Effect of Heating Time on Crack Formation –}},
  author    = {Takahashi, Masaru and Nakata, Masahiro and Imai, Kazuhito and Kojima, Nobusato and Ōtsuka, N.},
  journal   = {ISIJ International},
  year      = {2017},
  volume    = {57},
  number    = {6},
  pages     = {1094--1101},
  doi       = {10.2355/isijinternational.isijint-2016-730},
  url       = {https://doi.org/10.2355/isijinternational.isijint-2016-730}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201711
201833
201955
202055
202155
202288
202388
202422
202577
202644

Its field-weighted citation impact is 2.52: it has been cited 2.52 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels

  • liquid metal embrittlement
  • galvannealed steel
  • hot stamping
  • V-bending
  • crack formation
  • heating time
  • zinc enrichment
  • delta phase

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Takahashi, M., Nakata, M., Imai, K., Kojima, N., & Ōtsuka, N. (2017). Liquid Metal Embrittlement of Hot Stamped Galvannealed Boron Steel Sheet – Effect of Heating Time on Crack Formation –. ISIJ International, 57(6), 1094–1101. https://doi.org/10.2355/isijinternational.isijint-2016-730

How many times has this paper been cited?

48 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at ISIJ International: sign in and open the PDF from this page.

Who wrote this paper?

Masaru Takahashi, Masahiro Nakata, Kazuhito Imai, Nobusato Kojima, N. Ōtsuka.

What is the DOI of this paper?

10.2355/isijinternational.isijint-2016-730, permanently at https://doi.org/10.2355/isijinternational.isijint-2016-730. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.