Journal article · 2026 · Open access

Linking Coupled Reservoir Modeling to Dynamic Rupture Modeling: An Automated Workflow to Simulate Induced Seismicity in Faulted Geothermal Systems

Rahim Habibi, Thomas Ulrich, Alice‐Agnes Gabriel, Thomas Köhl, Emmanuel Gaucher

Rock Mechanics and Rock Engineering · Published 21 July 2026 · DOI 10.1007/s00603-026-05771-x

Open PDFView at the publisherCite this paper

In brief

“Linking Coupled Reservoir Modeling to Dynamic Rupture Modeling: An Automated Workflow to Simulate Induced Seismicity in Faulted Geothermal Systems” is a 2026 journal article by Rahim Habibi and 4 co-authors, published in Rock Mechanics and Rock Engineering. OpenAlex counts 0 citations as of 21 November 2026. It is open access under a CC BY licence: the full text is free to read at Rock Mechanics and Rock Engineering.

Citations
0
References
88
Authors
5

Abstract

Induced seismicity associated with subsurface fluid injection poses significant challenges for geothermal reservoir management. While quasi-static models capture long-term pressure, temperature, and stress evolution, dynamic rupture codes resolve transient earthquake mechanics. In this study, we develop a fully coupled framework that integrates both approaches to simulate fault reactivation and induced seismicity in a synthetic geothermal system. Unlike previous one-way coupled frameworks, our approach implements a closed-loop feedback, where stress redistribution from dynamically simulated seismic events is fed back into the quasi-static THM reservoir model. A 3D thermo-hydro-mechanical model tracks stress build-up during injection until a failure criterion is met, triggering a transition to a dynamic rupture solver that computes spontaneous 3D rupture propagation and seismic wave radiation. An automated coupling protocol ensures seamless data exchange between solvers. We demonstrate the framework by simulating two injection-induced events on a single-fault reservoir model. Results show that event-driven fault displacements and dynamic stress transfers significantly alter reservoir stress states. Simulated Coulomb stress changes, focal mechanisms, and slip distributions align with the ambient stress field and fault geometry. This closed-loop approach provides a robust tool for assessing seismic risk and optimizing injection strategies in geothermal environments.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Habibi, R., Ulrich, T., Gabriel, A., Köhl, T., & Gaucher, E. (2026). Linking Coupled Reservoir Modeling to Dynamic Rupture Modeling: An Automated Workflow to Simulate Induced Seismicity in Faulted Geothermal Systems. Rock Mechanics and Rock Engineering. https://doi.org/10.1007/s00603-026-05771-x

MLA 9

Habibi, Rahim, et al. “Linking Coupled Reservoir Modeling to Dynamic Rupture Modeling: An Automated Workflow to Simulate Induced Seismicity in Faulted Geothermal Systems.” Rock Mechanics and Rock Engineering, 2026. https://doi.org/10.1007/s00603-026-05771-x.

Chicago

Habibi, Rahim, Thomas Ulrich, Alice‐Agnes Gabriel, Thomas Köhl, and Emmanuel Gaucher. 2026. “Linking Coupled Reservoir Modeling to Dynamic Rupture Modeling: An Automated Workflow to Simulate Induced Seismicity in Faulted Geothermal Systems.” Rock Mechanics and Rock Engineering. https://doi.org/10.1007/s00603-026-05771-x.

Harvard

Habibi, R. et al. (2026) ‘Linking Coupled Reservoir Modeling to Dynamic Rupture Modeling: An Automated Workflow to Simulate Induced Seismicity in Faulted Geothermal Systems’, Rock Mechanics and Rock Engineering. doi:10.1007/s00603-026-05771-x.

IEEE

R. Habibi, T. Ulrich, A. Gabriel, T. Köhl, and E. Gaucher, “Linking Coupled Reservoir Modeling to Dynamic Rupture Modeling: An Automated Workflow to Simulate Induced Seismicity in Faulted Geothermal Systems,” Rock Mechanics and Rock Engineering, 2026, doi: 10.1007/s00603-026-05771-x.

BibTeX

@article{habibi2026linking,
  title     = {{Linking Coupled Reservoir Modeling to Dynamic Rupture Modeling: An Automated Workflow to Simulate Induced Seismicity in Faulted Geothermal Systems}},
  author    = {Habibi, Rahim and Ulrich, Thomas and Gabriel, Alice‐Agnes and Köhl, Thomas and Gaucher, Emmanuel},
  journal   = {Rock Mechanics and Rock Engineering},
  year      = {2026},
  doi       = {10.1007/s00603-026-05771-x},
  url       = {https://doi.org/10.1007/s00603-026-05771-x}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Energy › Fuel Technology › Hydraulic Fracturing and Reservoir Analysis

  • induced seismicity
  • dynamic rupture
  • geothermal reservoirs
  • thermo-hydro-mechanical modeling
  • fault reactivation
  • fluid injection
  • Coulomb stress change
  • seismic wave radiation

Work with this paper

Most-cited papers in Energy

All highly cited Energy papers

Questions about this paper

How do I cite this paper in APA style?

Habibi, R., Ulrich, T., Gabriel, A., Köhl, T., & Gaucher, E. (2026). Linking Coupled Reservoir Modeling to Dynamic Rupture Modeling: An Automated Workflow to Simulate Induced Seismicity in Faulted Geothermal Systems. Rock Mechanics and Rock Engineering. https://doi.org/10.1007/s00603-026-05771-x

How many times has this paper been cited?

0 times, according to OpenAlex on 21 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Rock Mechanics and Rock Engineering: sign in and open the PDF from this page.

Who wrote this paper?

Rahim Habibi, Thomas Ulrich, Alice‐Agnes Gabriel, Thomas Köhl, Emmanuel Gaucher.

What is the DOI of this paper?

10.1007/s00603-026-05771-x, permanently at https://doi.org/10.1007/s00603-026-05771-x. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 21 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.