Journal article · 2002 · Open access

Large-Scale Three-Dimensional Geomechanical Modeling of Reservoirs: Examples from California and the Deepwater Gulf of Mexico

J. T. Fredrich, A. F. Fossum

Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 57(5), 423–431 · Published 1 September 2002 · DOI 10.2516/ogst:2002028

Open PDFView at the publisherCite this paper

In brief

“Large-Scale Three-Dimensional Geomechanical Modeling of Reservoirs: Examples from California and the Deepwater Gulf of Mexico” is a 2002 journal article by J. T. Fredrich and A. F. Fossum, published in Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles. OpenAlex counts 26 citations as of 21 November 2026. It is open access under a public domain licence: the full text is free to read at Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles.

Citations
26
Most cited in
2013 (2)
Field-weighted impact
4.91
References
19
Authors
2

Abstract

Cost-effective improvements in the technology needed to develop and manage reservoirs in challenging environments require an increase in our understanding of geomechanical behavior. The local stresses relevant to reservoir-scale processes are strongly affected by stratigraphic and structural features at that scale, and the relationship between hydrocarbon production and the mechanical behavior of the reservoir and/or overburden can be complicated and difficult to discern from field data directly. Numerical simulation provides a means to achieve critical insight into the behavior of complex geosystems and advance understanding of both the subsurface environment before drilling as well as the relationship between fluid flow and geomechanical behavior during production. This paper reviews our recent work aimed at utilizing large-scale geomechanical simulation as a reservoir management tool. We first describe the constitutive models developed specifically for two important classes of geomaterials that are implemented in the quasi-static largedeformation finite element code JAS3D that we use in our work. We then describe several field cases where we apply nonlinear finite element modeling to key problems in reservoir mechanics. The first field cases involve historical geomechanical simulations of primary and secondary recovery at the Belridge Diatomite and Lost Hills fields located in California's San Joaquin Valley. In this work, we apply nonlinear finite element modeling to investigate the causes of well casing damage experienced by the field operators and to identify mitigation strategies. Next, we describe an application that addresses potential well integrity issues associated with sub-salt and near-salt deepwater Gulf of Mexico reservoirs. In this work, we analyze hole closure behavior and quantify loading on casings for wells that penetrate thick salt formations to ensure that wells are designed to withstand salt loading over a service lifetime of 20-30 years. The field studies illustrate the difficult issues encountered in practical applications of large-scale three-dimensional nonlinear finite element geomechanical modeling and suggest areas where research advances could be beneficial. These areas include: development of solids models and finite element meshes from disparate geologic and/or numerical data, development of realistic constitutive models, robust and efficient implementation of these material models in finite element codes to achieve reasonable solution times, experimental rock mechanics data and the natural heterogeneity of geosystems, implementation of far-field (tectonic) stresses and stress initialization, and integration of geomechanical modeling results with other analysis tools.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Fredrich, J. T., & Fossum, A. F. (2002). Large-Scale Three-Dimensional Geomechanical Modeling of Reservoirs: Examples from California and the Deepwater Gulf of Mexico. Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 57(5), 423–431. https://doi.org/10.2516/ogst:2002028

MLA 9

Fredrich, J. T., and A. F. Fossum. “Large-Scale Three-Dimensional Geomechanical Modeling of Reservoirs: Examples from California and the Deepwater Gulf of Mexico.” Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles, vol. 57, no. 5, 2002, pp. 423–431. https://doi.org/10.2516/ogst:2002028.

Chicago

Fredrich, J. T. and A. F. Fossum. 2002. “Large-Scale Three-Dimensional Geomechanical Modeling of Reservoirs: Examples from California and the Deepwater Gulf of Mexico.” Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles 57 (5): 423–431. https://doi.org/10.2516/ogst:2002028.

Harvard

Fredrich, J. T. and Fossum, A. F. (2002) ‘Large-Scale Three-Dimensional Geomechanical Modeling of Reservoirs: Examples from California and the Deepwater Gulf of Mexico’, Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 57(5), pp. 423–431. doi:10.2516/ogst:2002028.

IEEE

J. T. Fredrich and A. F. Fossum, “Large-Scale Three-Dimensional Geomechanical Modeling of Reservoirs: Examples from California and the Deepwater Gulf of Mexico,” Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles, vol. 57, no. 5, pp. 423–431, 2002, doi: 10.2516/ogst:2002028.

BibTeX

@article{fredrich2002large,
  title     = {{Large-Scale Three-Dimensional Geomechanical Modeling of Reservoirs: Examples from California and the Deepwater Gulf of Mexico}},
  author    = {Fredrich, J. T. and Fossum, A. F.},
  journal   = {Oil \& Gas Science and Technology – Revue d’IFP Energies nouvelles},
  year      = {2002},
  volume    = {57},
  number    = {5},
  pages     = {423--431},
  doi       = {10.2516/ogst:2002028},
  url       = {https://doi.org/10.2516/ogst:2002028}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201322
201411
201522
201711
201822
201922
202011
202322
202511
202622

Its field-weighted citation impact is 4.91: it has been cited 4.91 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Energy › Fuel Technology › Hydraulic Fracturing and Reservoir Analysis

  • reservoir geomechanics
  • nonlinear finite element analysis
  • Lost Hills field
  • deepwater Gulf of Mexico
  • salt loading
  • well integrity
  • hole closure
  • San Joaquin Valley

Work with this paper

Most-cited papers in Energy

All highly cited Energy papers

Questions about this paper

How do I cite this paper in APA style?

Fredrich, J. T., & Fossum, A. F. (2002). Large-Scale Three-Dimensional Geomechanical Modeling of Reservoirs: Examples from California and the Deepwater Gulf of Mexico. Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 57(5), 423–431. https://doi.org/10.2516/ogst:2002028

How many times has this paper been cited?

26 times, according to OpenAlex on 21 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles: sign in and open the PDF from this page.

Who wrote this paper?

J. T. Fredrich, A. F. Fossum.

What is the DOI of this paper?

10.2516/ogst:2002028, permanently at https://doi.org/10.2516/ogst:2002028. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 21 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.