Journal article · 2001 · Open access
K-1008 Fretting Wear of SiC and Ni_3Al Particles reinforced Al Alloy Matrix Composites under a Vacuum Condition
The proceedings of the JSME annual meeting, V.01.1(0), 127–128 · Published 1 January 2001 · DOI 10.1299/jsmemecjo.v.01.1.0_127
In brief
“K-1008 Fretting Wear of SiC and Ni_3Al Particles reinforced Al Alloy Matrix Composites under a Vacuum Condition” is a 2001 journal article by Rong Chen and 2 co-authors, published in The proceedings of the JSME annual meeting. OpenAlex counts 0 citations as of 17 November 2026. It is open access: the full text is free to read at The proceedings of the JSME annual meeting.
- Citations
- 0
- Authors
- 3
Abstract
Fretting friction and wear of aluminum alloy, 5 and 10 vol.% SiCp/Al and Ni_3Alp/Al composites under 5×10^ Pa vacuum was investigated. Wear mechanism in vacuum was compared with that in atmosphere at different applied load of 1, 2 and 3 N. The effect of particles and volume fraction was also studied. The coefficient of friction in vacuum reached to stable after only 10-100 cycles and kept unchanged for Al alloy and its composites. However, that in atmosphere was increased with the increased cycles. The value at 10^5 cycles in vacuum was smaller than that in atmosphere about 0.1 to 0.2. Incorporating SiC particles into the Al alloy matrix increased coefficient of friction, especially at low loads of 1 and 2 N. The wear resistance of Al alloys was improved by dispersion of large volume fraction of SiC particle. Ni_3Alp/Al composites did not show the improved wear resistance because of the poor quality of ingot. Wear volume of Al alloy and its composites in vacuum was smaller than that in atmosphere. However, the maximum wear depth was the converse. This is because the abrasive wear due to ferric oxide was hampered by vacuum, the deformation layer was deeper in vacuum. The counterface of the ball suffered large amount of wear volume when against composites of larger volume percentage.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Chen, R., IWABUCHI, A., & Shimizu, T. (2001). K-1008 Fretting Wear of SiC and Ni_3Al Particles reinforced Al Alloy Matrix Composites under a Vacuum Condition. The proceedings of the JSME annual meeting, V.01.1(0), 127–128. https://doi.org/10.1299/jsmemecjo.v.01.1.0_127
MLA 9
Chen, Rong, et al. “K-1008 Fretting Wear of SiC and Ni_3Al Particles reinforced Al Alloy Matrix Composites under a Vacuum Condition.” The proceedings of the JSME annual meeting, vol. V.01.1, no. 0, 2001, pp. 127–128. https://doi.org/10.1299/jsmemecjo.v.01.1.0_127.
Chicago
Chen, Rong, Akira IWABUCHI, and Tomoharu Shimizu. 2001. “K-1008 Fretting Wear of SiC and Ni_3Al Particles reinforced Al Alloy Matrix Composites under a Vacuum Condition.” The proceedings of the JSME annual meeting V.01.1 (0): 127–128. https://doi.org/10.1299/jsmemecjo.v.01.1.0_127.
Harvard
Chen, R., IWABUCHI, A. and Shimizu, T. (2001) ‘K-1008 Fretting Wear of SiC and Ni_3Al Particles reinforced Al Alloy Matrix Composites under a Vacuum Condition’, The proceedings of the JSME annual meeting, V.01.1(0), pp. 127–128. doi:10.1299/jsmemecjo.v.01.1.0_127.
IEEE
R. Chen, A. IWABUCHI, and T. Shimizu, “K-1008 Fretting Wear of SiC and Ni_3Al Particles reinforced Al Alloy Matrix Composites under a Vacuum Condition,” The proceedings of the JSME annual meeting, vol. V.01.1, no. 0, pp. 127–128, 2001, doi: 10.1299/jsmemecjo.v.01.1.0_127.
BibTeX
@article{chen2001fretting,
title = {{K-1008 Fretting Wear of SiC and Ni\_3Al Particles reinforced Al Alloy Matrix Composites under a Vacuum Condition}},
author = {Chen, Rong and IWABUCHI, Akira and Shimizu, Tomoharu},
journal = {The proceedings of the JSME annual meeting},
year = {2001},
volume = {V.01.1},
number = {0},
pages = {127--128},
doi = {10.1299/jsmemecjo.v.01.1.0_127},
url = {https://doi.org/10.1299/jsmemecjo.v.01.1.0_127}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Mechanical stress and fatigue analysis
- fretting wear
- aluminum matrix composites
- SiC particle reinforcement
- friction coefficient
- wear resistance
- wear volume
- wear depth
- abrasive wear
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Chen, R., IWABUCHI, A., & Shimizu, T. (2001). K-1008 Fretting Wear of SiC and Ni_3Al Particles reinforced Al Alloy Matrix Composites under a Vacuum Condition. The proceedings of the JSME annual meeting, V.01.1(0), 127–128. https://doi.org/10.1299/jsmemecjo.v.01.1.0_127
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at The proceedings of the JSME annual meeting: sign in and open the PDF from this page.
Who wrote this paper?
Rong Chen, Akira IWABUCHI, Tomoharu Shimizu.
What is the DOI of this paper?
10.1299/jsmemecjo.v.01.1.0_127, permanently at https://doi.org/10.1299/jsmemecjo.v.01.1.0_127. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.