Dissertation · 2018 · Open access

Junction engineering and device design for silicon heterojunction and interdigitated back contact silicon heterojunction solar cells

Lei Zhang

Library, Museums and Press - UDSpace (University of Delaware) · Published 1 January 2018 · DOI 10.58088/dg16-ac11

Read the free full textView at the publisherCite this paper

In brief

“Junction engineering and device design for silicon heterojunction and interdigitated back contact silicon heterojunction solar cells” is a 2018 dissertation by Lei Zhang, published in Library, Museums and Press - UDSpace (University of Delaware). OpenAlex counts 0 citations as of 16 November 2026. It is open access: the full text is free to read at Library, Museums and Press - UDSpace (University of Delaware).

Citations
0
Authors
1

Abstract

The interdigitated back contact silicon heterojunction (IBC-SHJ) solar cell currently holds the record conversion efficiency for non-concentrated single junction silicon solar cells with an efficiency of 26.7%. The aim of this dissertation is to understand the fundamental loss mechanisms of IBC-SHJ related to the rear surface design and to minimize these losses utilizing advanced numerical simulations, novel test structure characterizations and scalable device fabrication processes. The findings in this dissertation will serve as guidance for the industry-oriented R & D efforts to make IBC-SHJ mass-production cost-effective without compromising the performance. The outcomes of this dissertation are four-fold: ☐ First, a lifetime simulation tool based on the extended Shockley-Read-Hall (SRH) recombination formalism has been developed as guidance to investigate c-Si surface passivation. Plasma enhanced chemical vapor deposition (PECVD) conditions of intrinsic hydrogenated amorphous silicon (i.a-Si:H) films were explored for passivating the commercial n-type c-Si (n.c-Si) wafer surfaces and correlation to the properties of films was established through material characterizations. Passivated lifetime > 1ms with implied open circuit voltage (iVOC) > 700 mV has been achieved. The trade-off between front surface absorption loss and rear surface emitter junction valence band offset effect was simultaneously accommodated with an optimized i.a-Si:H layer. ☐ Second, an advanced two-dimensional (2-D) IBC-SHJ simulation model has been developed to investigate the IBC-SHJ device rear surface design of three regions: emitter contact, base contact and the non-metallized gap region between them. Simulations suggested that IBC-SHJ performance is more sensitive to the surface passivation quality in emitter and gap regions than the base region. The trade-offs between VOC and FF were diagnosed by experimentally varying p-type a-Si:H layers (p.a-Si:H) and their application on SHJ test structures. A graded high-low p.a-Si:H emitter structure was established, demonstrating IBC-SHJ solar cell efficiency of 20.2% fabricated by complex three-step photolithography (PL) process. ☐ Thirdly, to minimize the lateral transport loss over the rear surface gap region, four different passivation structures were investigated utilizing potential industrially-scalable process. Interface defect density (Dit) and interface charge density (Qpass) for the four structures were extracted utilizing a lifetime simulator. The 2-D IBC-SHJ device simulations indicated that > 21.5% conversion efficiency is achievable on devices fabricated with our current process. However, experimental results of IBC-SHJ fabricated with simplified processes suggested that a gap passivation structure which induces inversion at n.c-Si surface should be avoided. ☐ Fourth, to validate the inversion layer effect on IBC-SHJ device, a novel three-terminal rear SHJ test structure was invented. This structure enabled an external DC bias to be applied onto one of the rear…

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Zhang, L. (2018). Junction engineering and device design for silicon heterojunction and interdigitated back contact silicon heterojunction solar cells. Library, Museums and Press - UDSpace (University of Delaware). https://doi.org/10.58088/dg16-ac11

MLA 9

Zhang, Lei. “Junction engineering and device design for silicon heterojunction and interdigitated back contact silicon heterojunction solar cells.” Library, Museums and Press - UDSpace (University of Delaware), 2018. https://doi.org/10.58088/dg16-ac11.

Chicago

Zhang, Lei. 2018. “Junction engineering and device design for silicon heterojunction and interdigitated back contact silicon heterojunction solar cells.” Library, Museums and Press - UDSpace (University of Delaware). https://doi.org/10.58088/dg16-ac11.

Harvard

Zhang, L. (2018) ‘Junction engineering and device design for silicon heterojunction and interdigitated back contact silicon heterojunction solar cells’, Library, Museums and Press - UDSpace (University of Delaware). doi:10.58088/dg16-ac11.

IEEE

L. Zhang, “Junction engineering and device design for silicon heterojunction and interdigitated back contact silicon heterojunction solar cells,” Library, Museums and Press - UDSpace (University of Delaware), 2018, doi: 10.58088/dg16-ac11.

BibTeX

@phdthesis{zhang2018junction,
  title     = {{Junction engineering and device design for silicon heterojunction and interdigitated back contact silicon heterojunction solar cells}},
  author    = {Zhang, Lei},
  year      = {2018},
  doi       = {10.58088/dg16-ac11},
  url       = {https://doi.org/10.58088/dg16-ac11}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies

  • interdigitated back contact
  • silicon heterojunction solar cells
  • junction engineering
  • surface passivation
  • hydrogenated amorphous silicon
  • Shockley-Read-Hall recombination
  • interface defect density
  • interface charge density

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Zhang, L. (2018). Junction engineering and device design for silicon heterojunction and interdigitated back contact silicon heterojunction solar cells. Library, Museums and Press - UDSpace (University of Delaware). https://doi.org/10.58088/dg16-ac11

How many times has this paper been cited?

0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Library, Museums and Press - UDSpace (University of Delaware).

Who wrote this paper?

Lei Zhang.

What is the DOI of this paper?

10.58088/dg16-ac11. The permanent link is https://doi.org/10.58088/dg16-ac11.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.