Journal article · 2013 · Open access

J212016 HIPIMS Deposition of TiAlN Thin Film and Its Tribological Properties

Tetsuhide Shimizu, Hidetoshi Komiya, Tomotaro Watanabe, Yoshikazu Teranishi, Hiroshi NAGASAKA, Ming Yang

The Proceedings of Mechanical Engineering Congress Japan, 2013(0), _J212016–1 · Published 1 January 2013 · DOI 10.1299/jsmemecj.2013._j212016-1

Free PDFView at the publisherCite this paper

In brief

“J212016 HIPIMS Deposition of TiAlN Thin Film and Its Tribological Properties” is a 2013 journal article by Tetsuhide Shimizu and 5 co-authors, published in The Proceedings of Mechanical Engineering Congress Japan. OpenAlex counts 0 citations as of 16 November 2026. It is open access: the full text is free to read at The Proceedings of Mechanical Engineering Congress Japan.

Citations
0
Authors
6

Abstract

High power impulse magnetron sputtering (HIPIMS) deposition technique is an ionized PVD process, which applies pulsed power of low duty cycle (<10%) and frequency (<10 kHz) to sputtering target resulting in high target power densities of several kW cm^. A number of studies has reported the advantageous features of HIPIMS deposited films, such as dense and smooth surface, and three-dimensional uniformity on complex-shaped substrates. In view of its application to micro-precision stamping die, the present study focuses on the durability of hard coating films deposited by HIPIMS process. TiAIN films were deposited by both HIPIMS and conventional direct current magnetron sputtering (dcMS) on the high speed steel substrates. A scratch test and ball-on-disc type tribology test were perfomed to invesitgate its adhesion strength on the substrates and wear resistance, respectively. As results, the higher value of critical load in scratch test (L_c=60N) and the lower wear rate of w_s=5.74×10^ m^3/Nm was obtained for HIPIMS deposited films compared with that for the conventional dcMS process. The applicability of the advantageous features of HIPIMS deposition TiAIN films to the micro-precision stamping dies are experimentally demonstrated.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Shimizu, T., Komiya, H., Watanabe, T., Teranishi, Y., NAGASAKA, H., & Yang, M. (2013). J212016 HIPIMS Deposition of TiAlN Thin Film and Its Tribological Properties. The Proceedings of Mechanical Engineering Congress Japan, 2013(0), _J212016–1. https://doi.org/10.1299/jsmemecj.2013._j212016-1

MLA 9

Shimizu, Tetsuhide, et al. “J212016 HIPIMS Deposition of TiAlN Thin Film and Its Tribological Properties.” The Proceedings of Mechanical Engineering Congress Japan, vol. 2013, no. 0, 2013, pp. _J212016–1. https://doi.org/10.1299/jsmemecj.2013._j212016-1.

Chicago

Shimizu, Tetsuhide, Hidetoshi Komiya, Tomotaro Watanabe, Yoshikazu Teranishi, Hiroshi NAGASAKA, and Ming Yang. 2013. “J212016 HIPIMS Deposition of TiAlN Thin Film and Its Tribological Properties.” The Proceedings of Mechanical Engineering Congress Japan 2013 (0): _J212016–1. https://doi.org/10.1299/jsmemecj.2013._j212016-1.

Harvard

Shimizu, T. et al. (2013) ‘J212016 HIPIMS Deposition of TiAlN Thin Film and Its Tribological Properties’, The Proceedings of Mechanical Engineering Congress Japan, 2013(0), pp. _J212016–1. doi:10.1299/jsmemecj.2013._j212016-1.

IEEE

T. Shimizu, H. Komiya, T. Watanabe, Y. Teranishi, H. NAGASAKA, and M. Yang, “J212016 HIPIMS Deposition of TiAlN Thin Film and Its Tribological Properties,” The Proceedings of Mechanical Engineering Congress Japan, vol. 2013, no. 0, pp. _J212016–1, 2013, doi: 10.1299/jsmemecj.2013._j212016-1.

BibTeX

@article{shimizu2013hipims,
  title     = {{J212016 HIPIMS Deposition of TiAlN Thin Film and Its Tribological Properties}},
  author    = {Shimizu, Tetsuhide and Komiya, Hidetoshi and Watanabe, Tomotaro and Teranishi, Yoshikazu and NAGASAKA, Hiroshi and Yang, Ming},
  journal   = {The Proceedings of Mechanical Engineering Congress Japan},
  year      = {2013},
  volume    = {2013},
  number    = {0},
  pages     = {_J212016--1},
  doi       = {10.1299/jsmemecj.2013._j212016-1},
  url       = {https://doi.org/10.1299/jsmemecj.2013._j212016-1}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • high power impulse magnetron sputtering
  • TiAlN thin films
  • tribological properties
  • wear resistance
  • adhesion strength
  • scratch test
  • ball-on-disc test
  • high-speed steel substrates

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Shimizu, T., Komiya, H., Watanabe, T., Teranishi, Y., NAGASAKA, H., & Yang, M. (2013). J212016 HIPIMS Deposition of TiAlN Thin Film and Its Tribological Properties. The Proceedings of Mechanical Engineering Congress Japan, 2013(0), _J212016–1. https://doi.org/10.1299/jsmemecj.2013._j212016-1

How many times has this paper been cited?

0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at The Proceedings of Mechanical Engineering Congress Japan.

Who wrote this paper?

Tetsuhide Shimizu, Hidetoshi Komiya, Tomotaro Watanabe, Yoshikazu Teranishi, Hiroshi NAGASAKA, Ming Yang.

What is the DOI of this paper?

10.1299/jsmemecj.2013._j212016-1. The permanent link is https://doi.org/10.1299/jsmemecj.2013._j212016-1.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.