Journal article · 1999 · Open access

Ion energy and momentum flux dependence of diamond-like carbon film synthesis in radio frequency discharges

A. D. Glew, Ranjana Saha, J.S. Kim, Mark Cappelli

Surface and Coatings Technology, 114(2-3), 224–229 · Published 1 May 1999 · DOI 10.1016/s0257-8972(99)00061-4

Open full textCite this paper

In brief

“Ion energy and momentum flux dependence of diamond-like carbon film synthesis in radio frequency discharges” is a 1999 journal article by A. D. Glew and 3 co-authors, published in Surface and Coatings Technology. OpenAlex counts 31 citations as of 21 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Surface and Coatings Technology.

Citations
31
Most cited in
2012 (4)
Field-weighted impact
1.01
References
31
Authors
4

Abstract

An investigation of the ion energy and ion momentum flux dependence of the properties of plasma-deposited diamond-like carbon (DLC) films is presented. The DLC films are deposited in low pressure radio frequency (RF) discharges operating at 13.3 Pa with methane as the source gas. The discharge is characterized in situ for the negative direct current (d.c.) self-bias voltage at the powered electrode, the average discharge current, and the total power, from which the average ion energy and average incident momentum flux can be determined. Ion energies explored in this study range from 50 to 250 eV. Films are deposited on [100] n-type silicon wafers and are characterized by a variety of analytical methods to determine film hardness, density, and stress. It is shown that the maximum film density (1.7 g/cm3) and hardness (18 GPa) correspond to conditions of maximum deposition rate (5×10−6 g/s) and maximum film stress (1.8 GPa) all at ion energies of approximately 160 eV. These values are comparable with those previously reported in the literature. The relationship between film properties and impinging ion energy and ion momentum flux is discussed within the framework of existing models of diamond-like carbon formation.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Glew, A. D., Saha, R., Kim, J., & Cappelli, M. (1999). Ion energy and momentum flux dependence of diamond-like carbon film synthesis in radio frequency discharges. Surface and Coatings Technology, 114(2-3), 224–229. https://doi.org/10.1016/s0257-8972(99)00061-4

MLA 9

Glew, A. D., et al. “Ion energy and momentum flux dependence of diamond-like carbon film synthesis in radio frequency discharges.” Surface and Coatings Technology, vol. 114, no. 2-3, 1999, pp. 224–229. https://doi.org/10.1016/s0257-8972(99)00061-4.

Chicago

Glew, A. D., Ranjana Saha, J.S. Kim, and Mark Cappelli. 1999. “Ion energy and momentum flux dependence of diamond-like carbon film synthesis in radio frequency discharges.” Surface and Coatings Technology 114 (2-3): 224–229. https://doi.org/10.1016/s0257-8972(99)00061-4.

Harvard

Glew, A. D. et al. (1999) ‘Ion energy and momentum flux dependence of diamond-like carbon film synthesis in radio frequency discharges’, Surface and Coatings Technology, 114(2-3), pp. 224–229. doi:10.1016/s0257-8972(99)00061-4.

IEEE

A. D. Glew, R. Saha, J. Kim, and M. Cappelli, “Ion energy and momentum flux dependence of diamond-like carbon film synthesis in radio frequency discharges,” Surface and Coatings Technology, vol. 114, no. 2-3, pp. 224–229, 1999, doi: 10.1016/s0257-8972(99)00061-4.

BibTeX

@article{glew1999energy,
  title     = {{Ion energy and momentum flux dependence of diamond-like carbon film synthesis in radio frequency discharges}},
  author    = {Glew, A. D. and Saha, Ranjana and Kim, J.S. and Cappelli, Mark},
  journal   = {Surface and Coatings Technology},
  year      = {1999},
  volume    = {114},
  number    = {2-3},
  pages     = {224--229},
  doi       = {10.1016/s0257-8972(99)00061-4},
  url       = {https://doi.org/10.1016/s0257-8972(99)00061-4}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201244
201411
201811
201911
202011
202233
202411
202611

Its field-weighted citation impact is 1.01: it has been cited 1.01 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Diamond and Carbon-based Materials Research

  • diamond-like carbon films
  • ion energy
  • RF discharge
  • methane plasma
  • plasma deposition
  • film hardness
  • film density
  • film stress

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Glew, A. D., Saha, R., Kim, J., & Cappelli, M. (1999). Ion energy and momentum flux dependence of diamond-like carbon film synthesis in radio frequency discharges. Surface and Coatings Technology, 114(2-3), 224–229. https://doi.org/10.1016/s0257-8972(99)00061-4

How many times has this paper been cited?

31 times, according to OpenAlex on 21 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Surface and Coatings Technology: sign in and open the full text from this page.

Who wrote this paper?

A. D. Glew, Ranjana Saha, J.S. Kim, Mark Cappelli.

What is the DOI of this paper?

10.1016/s0257-8972(99)00061-4, permanently at https://doi.org/10.1016/s0257-8972(99)00061-4. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 21 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.