Journal article · 2021 · Open access

Investigations of Dual Plug Argon Blowing for Efficient Mixing at Ladle Furnace Station

Marek Warzecha, A. Hutny, Piotr Warzecha, Z. Kutyła, Tomasz Merder

Archives of Metallurgy and Materials, 561–572 · Published 13 May 2021 · DOI 10.24425/amm.2021.135893

Open PDFView at the publisherCite this paper

In brief

“Investigations of Dual Plug Argon Blowing for Efficient Mixing at Ladle Furnace Station” is a 2021 journal article by Marek Warzecha and 4 co-authors, published in Archives of Metallurgy and Materials. OpenAlex counts 7 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Archives of Metallurgy and Materials.

Citations
7
Most cited in
2024 (3)
Field-weighted impact
0.41
References
35
Authors
5

Abstract

The article presents the results of model research concerning the change of technology of argon blowing into liquid steel at the ladle furnace, using the dual plug system. The results of numerical simulations were verified with experimental data carried out on the water model device. The verified model was used to perform numerical simulations to predict the impact of using a new gas injection technology – with different flow rates – on the time to achieve the assumed degree of metal chemical homogenization after alloy addition. Simulation results show that argon blowing metal bath in dual plug mode can effectively reduce mixing time compared to conventional technology with the same gas flow rates. Generally, the use of the dual plug system is beneficial for reducing the bath mixing time, however, the assumed optimal proportion of gas blown through individual plug should be followed. Finally, numerical predictions were used to perform experimental melt under industrial conditions. Industrial verification has clearly confirmed the validity of numerical modeling and showed that also in industrial conditions, a shorter time of chemical homogenization was obtained for the dual plug system.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Warzecha, M., Hutny, A., Warzecha, P., Kutyła, Z., & Merder, T. (2021). Investigations of Dual Plug Argon Blowing for Efficient Mixing at Ladle Furnace Station. Archives of Metallurgy and Materials, 561–572. https://doi.org/10.24425/amm.2021.135893

MLA 9

Warzecha, Marek, et al. “Investigations of Dual Plug Argon Blowing for Efficient Mixing at Ladle Furnace Station.” Archives of Metallurgy and Materials, 2021, pp. 561–572. https://doi.org/10.24425/amm.2021.135893.

Chicago

Warzecha, Marek, A. Hutny, Piotr Warzecha, Z. Kutyła, and Tomasz Merder. 2021. “Investigations of Dual Plug Argon Blowing for Efficient Mixing at Ladle Furnace Station.” Archives of Metallurgy and Materials: 561–572. https://doi.org/10.24425/amm.2021.135893.

Harvard

Warzecha, M. et al. (2021) ‘Investigations of Dual Plug Argon Blowing for Efficient Mixing at Ladle Furnace Station’, Archives of Metallurgy and Materials, pp. 561–572. doi:10.24425/amm.2021.135893.

IEEE

M. Warzecha, A. Hutny, P. Warzecha, Z. Kutyła, and T. Merder, “Investigations of Dual Plug Argon Blowing for Efficient Mixing at Ladle Furnace Station,” Archives of Metallurgy and Materials, pp. 561–572, 2021, doi: 10.24425/amm.2021.135893.

BibTeX

@article{warzecha2021investigations,
  title     = {{Investigations of Dual Plug Argon Blowing for Efficient Mixing at Ladle Furnace Station}},
  author    = {Warzecha, Marek and Hutny, A. and Warzecha, Piotr and Kutyła, Z. and Merder, Tomasz},
  journal   = {Archives of Metallurgy and Materials},
  year      = {2021},
  pages     = {561--572},
  doi       = {10.24425/amm.2021.135893},
  url       = {https://doi.org/10.24425/amm.2021.135893}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202311
202433
202533

Its field-weighted citation impact is 0.41: it has been cited 0.41 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics

  • ladle furnace
  • chemical homogenization
  • gas injection
  • alloying elements
  • mixing time
  • numerical simulation
  • water model

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Warzecha, M., Hutny, A., Warzecha, P., Kutyła, Z., & Merder, T. (2021). Investigations of Dual Plug Argon Blowing for Efficient Mixing at Ladle Furnace Station. Archives of Metallurgy and Materials, 561–572. https://doi.org/10.24425/amm.2021.135893

How many times has this paper been cited?

7 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Archives of Metallurgy and Materials: sign in and open the PDF from this page.

Who wrote this paper?

Marek Warzecha, A. Hutny, Piotr Warzecha, Z. Kutyła, Tomasz Merder.

What is the DOI of this paper?

10.24425/amm.2021.135893, permanently at https://doi.org/10.24425/amm.2021.135893. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.