Journal article · 2013 · Open access
Investigation of Tool Wear, Tool Life and Surface Roughness when Machining AISI D2 Hardened Steel Using PVD TiAlN Coated Carbide Tools
Applied Mechanics and Materials, 465-466, 1098–1102 · Published 19 December 2013 · DOI 10.4028/www.scientific.net/amm.465-466.1098
In brief
“Investigation of Tool Wear, Tool Life and Surface Roughness when Machining AISI D2 Hardened Steel Using PVD TiAlN Coated Carbide Tools” is a 2013 journal article by Noor Hakim Rafai and 2 co-authors, published in Applied Mechanics and Materials. OpenAlex counts 2 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Applied Mechanics and Materials.
- Citations
- 2
- Most cited in
- 2017 (1)
- References
- 8
- Authors
- 3
Abstract
This paper discussed the behavior of cutting tool in terms of tool wear, tool life and surface roughness when machining an AISI D2 hardened steel. An experimental test was conducted at different cutting speeds (Vc) and radial depth of cut (ae) using PVD TiAlN coated carbide tool under dry condition. Tool failure modes and tool wear mechanism for all cutting tools were examined at various cutting parameters. Flank wear was found to be the predominant tool failure for cutting tools. The highest volume material removal (VMR) attained was 3750 mm3 meanwhile the highest tool life (TL) was 9.69 min. The surface roughness (Ra) values from 0.09 to 0.24 μm can be attained in the workpiece with a high material removal. The relationship of tool wear performance and surface integrity was established to lead an optimum parameter in order to have high material removal, maximum tool life as well as acceptable surface finish.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Rafai, N. H., Lajis, M. A., & Hosni, N. (2013). Investigation of Tool Wear, Tool Life and Surface Roughness when Machining AISI D2 Hardened Steel Using PVD TiAlN Coated Carbide Tools. Applied Mechanics and Materials, 465-466, 1098–1102. https://doi.org/10.4028/www.scientific.net/amm.465-466.1098
MLA 9
Rafai, Noor Hakim, et al. “Investigation of Tool Wear, Tool Life and Surface Roughness when Machining AISI D2 Hardened Steel Using PVD TiAlN Coated Carbide Tools.” Applied Mechanics and Materials, vol. 465-466, 2013, pp. 1098–1102. https://doi.org/10.4028/www.scientific.net/amm.465-466.1098.
Chicago
Rafai, Noor Hakim, Mohd Amri Lajis, and N.A.J. Hosni. 2013. “Investigation of Tool Wear, Tool Life and Surface Roughness when Machining AISI D2 Hardened Steel Using PVD TiAlN Coated Carbide Tools.” Applied Mechanics and Materials 465-466: 1098–1102. https://doi.org/10.4028/www.scientific.net/amm.465-466.1098.
Harvard
Rafai, N. H., Lajis, M. A. and Hosni, N. (2013) ‘Investigation of Tool Wear, Tool Life and Surface Roughness when Machining AISI D2 Hardened Steel Using PVD TiAlN Coated Carbide Tools’, Applied Mechanics and Materials, 465-466, pp. 1098–1102. doi:10.4028/www.scientific.net/amm.465-466.1098.
IEEE
N. H. Rafai, M. A. Lajis, and N. Hosni, “Investigation of Tool Wear, Tool Life and Surface Roughness when Machining AISI D2 Hardened Steel Using PVD TiAlN Coated Carbide Tools,” Applied Mechanics and Materials, vol. 465-466, pp. 1098–1102, 2013, doi: 10.4028/www.scientific.net/amm.465-466.1098.
BibTeX
@article{rafai2013investigation,
title = {{Investigation of Tool Wear, Tool Life and Surface Roughness when Machining AISI D2 Hardened Steel Using PVD TiAlN Coated Carbide Tools}},
author = {Rafai, Noor Hakim and Lajis, Mohd Amri and Hosni, N.A.J.},
journal = {Applied Mechanics and Materials},
year = {2013},
volume = {465-466},
pages = {1098--1102},
doi = {10.4028/www.scientific.net/amm.465-466.1098},
url = {https://doi.org/10.4028/www.scientific.net/amm.465-466.1098}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- tool wear
- tool life
- surface roughness
- coated carbide tools
- flank wear
- dry machining
- cutting speed
- depth of cut
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Rafai, N. H., Lajis, M. A., & Hosni, N. (2013). Investigation of Tool Wear, Tool Life and Surface Roughness when Machining AISI D2 Hardened Steel Using PVD TiAlN Coated Carbide Tools. Applied Mechanics and Materials, 465-466, 1098–1102. https://doi.org/10.4028/www.scientific.net/amm.465-466.1098
How many times has this paper been cited?
2 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Applied Mechanics and Materials: sign in and open the full text from this page.
Who wrote this paper?
Noor Hakim Rafai, Mohd Amri Lajis, N.A.J. Hosni.
What is the DOI of this paper?
10.4028/www.scientific.net/amm.465-466.1098, permanently at https://doi.org/10.4028/www.scientific.net/amm.465-466.1098. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.