Journal article · 2024 · Open access

Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools

Muhammad Umer Younas, Mushtaq Khan, Syed Husain Imran Jaffery, Zarak Khan, Nawar Khan

The International Journal of Advanced Manufacturing Technology, 132(7-8), 3785–3799 · Published 16 April 2024 · DOI 10.1007/s00170-024-13548-1

Open PDFView at the publisherCite this paper

In brief

“Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools” is a 2024 journal article by Muhammad Umer Younas and 4 co-authors, published in The International Journal of Advanced Manufacturing Technology. OpenAlex counts 22 citations as of 17 November 2026, which puts it in the top 7% of works published in 2024 by citations. It is open access under a CC BY licence: the full text is free to read at The International Journal of Advanced Manufacturing Technology.

Citations
22
Most cited in
2026 (14)
Field-weighted impact
2.65
References
34
Authors
5

Abstract

This research studies the energy consumption and wear mechanism of carbide cutting tools in dry machining of Ti6Al4V alloy. In the first phase of experiments, full factorial design experiments were employed to study the tool wear rate (R) and specific cutting energy (SCE) with respect to the machining conditions (cutting speed and feed rate). Results showed that machining responses such as tool wear and energy consumption are affected by cutting conditions, thus requiring investigation to understand the wear mechanisms. Therefore, in the second phase, additional experiments were performed to investigate the tool-workpiece interactions at the cutting conditions reported to have low, moderate, and high tool wear. It was revealed that strong adhesion and material transfer between the tool and workpiece caused high wear. Electron dispersive X-ray spectroscopy (EDX) analysis of worn tools showed that the transfer of tungsten (W) and cobalt (Co) to the workpiece and titanium to the tool surface is the primary cause of tool deterioration. As a result, diffusion and dissolution have degraded cutting performance and weakened the tool edge, leading to rapid wear. Furthermore, worn tools resulted in relatively higher energy consumption per unit volume of material removed at the tooltip. The degradation of cutting performance and weakening of the tool edge results in rapid wear and higher energy consumption. The study suggests that minimizing tool wear is crucial for energy reduction, improved sustainability, and cleaner production goals in dry machining of titanium-based alloys.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Younas, M. U., Khan, M., Jaffery, S. H. I., Khan, Z., & Khan, N. (2024). Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools. The International Journal of Advanced Manufacturing Technology, 132(7-8), 3785–3799. https://doi.org/10.1007/s00170-024-13548-1

MLA 9

Younas, Muhammad Umer, et al. “Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools.” The International Journal of Advanced Manufacturing Technology, vol. 132, no. 7-8, 2024, pp. 3785–3799. https://doi.org/10.1007/s00170-024-13548-1.

Chicago

Younas, Muhammad Umer, Mushtaq Khan, Syed Husain Imran Jaffery, Zarak Khan, and Nawar Khan. 2024. “Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools.” The International Journal of Advanced Manufacturing Technology 132 (7-8): 3785–3799. https://doi.org/10.1007/s00170-024-13548-1.

Harvard

Younas, M. U. et al. (2024) ‘Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools’, The International Journal of Advanced Manufacturing Technology, 132(7-8), pp. 3785–3799. doi:10.1007/s00170-024-13548-1.

IEEE

M. U. Younas, M. Khan, S. H. I. Jaffery, Z. Khan, and N. Khan, “Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools,” The International Journal of Advanced Manufacturing Technology, vol. 132, no. 7-8, pp. 3785–3799, 2024, doi: 10.1007/s00170-024-13548-1.

BibTeX

@article{younas2024investigation,
  title     = {{Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools}},
  author    = {Younas, Muhammad Umer and Khan, Mushtaq and Jaffery, Syed Husain Imran and Khan, Zarak and Khan, Nawar},
  journal   = {The International Journal of Advanced Manufacturing Technology},
  year      = {2024},
  volume    = {132},
  number    = {7-8},
  pages     = {3785--3799},
  doi       = {10.1007/s00170-024-13548-1},
  url       = {https://doi.org/10.1007/s00170-024-13548-1}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202422
202566
20261414

Its field-weighted citation impact is 2.65: it has been cited 2.65 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • Ti-6Al-4V
  • titanium alloy machining
  • tool wear
  • specific cutting energy
  • dry machining
  • uncoated carbide tools
  • tool-workpiece interaction
  • adhesion

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Younas, M. U., Khan, M., Jaffery, S. H. I., Khan, Z., & Khan, N. (2024). Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools. The International Journal of Advanced Manufacturing Technology, 132(7-8), 3785–3799. https://doi.org/10.1007/s00170-024-13548-1

How many times has this paper been cited?

22 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at The International Journal of Advanced Manufacturing Technology: sign in and open the PDF from this page.

Who wrote this paper?

Muhammad Umer Younas, Mushtaq Khan, Syed Husain Imran Jaffery, Zarak Khan, Nawar Khan.

What is the DOI of this paper?

10.1007/s00170-024-13548-1, permanently at https://doi.org/10.1007/s00170-024-13548-1. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.