Journal article · 2018 · Open access
Investigation of the tribological performance of AlTiN coated cutting tools in the machining of Ti6Al4V titanium alloy in terms of demanded tool life
Eksploatacja i Niezawodnosc - Maintenance and Reliability, 21(1), 153–158 · Published 19 December 2018 · DOI 10.17531/ein.2019.1.17
In brief
“Investigation of the tribological performance of AlTiN coated cutting tools in the machining of Ti6Al4V titanium alloy in terms of demanded tool life” is a 2018 journal article by Wit Grzesik and 2 co-authors, published in Eksploatacja i Niezawodnosc - Maintenance and Reliability. OpenAlex counts 12 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Eksploatacja i Niezawodnosc - Maintenance and Reliability.
- Citations
- 12
- Most cited in
- 2022 (3)
- Field-weighted impact
- 0.32
- References
- 18
- Authors
- 3
Abstract
This paper presents a multi-factorial approach to the tool wear evolution when machining Ti6Al4V titanium alloy using high temperature resistant AlTiN coated cutting tools. Machining conditions were selected based on the technological database of machining titanium alloys in aircraft plants. The main novelty of this study is that tool wear progress within the tool life of about 20 min is assessed integrally in terms of mechanical, thermal and tribological process outputs such as cutting forces, cutting energy and cutting temperature. Moreover, the specific cutting energy (SCE), thermal softening effect and friction coefficient (CoF) were determined when recording tool wear curves. Some important research findings concerns distinguishing the three characteristic wear periods with distinctly different values of SCE and CoF. In particular, it was revealed that the formation of ceramic protective layer (CPL) on the AlTiN deposited coating influences friction and the tool wear mechanism.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Grzesik, W., Niesłony, P., & Habrat, W. F. (2018). Investigation of the tribological performance of AlTiN coated cutting tools in the machining of Ti6Al4V titanium alloy in terms of demanded tool life. Eksploatacja i Niezawodnosc - Maintenance and Reliability, 21(1), 153–158. https://doi.org/10.17531/ein.2019.1.17
MLA 9
Grzesik, Wit, et al. “Investigation of the tribological performance of AlTiN coated cutting tools in the machining of Ti6Al4V titanium alloy in terms of demanded tool life.” Eksploatacja i Niezawodnosc - Maintenance and Reliability, vol. 21, no. 1, 2018, pp. 153–158. https://doi.org/10.17531/ein.2019.1.17.
Chicago
Grzesik, Wit, Piotr Niesłony, and Witold F. Habrat. 2018. “Investigation of the tribological performance of AlTiN coated cutting tools in the machining of Ti6Al4V titanium alloy in terms of demanded tool life.” Eksploatacja i Niezawodnosc - Maintenance and Reliability 21 (1): 153–158. https://doi.org/10.17531/ein.2019.1.17.
Harvard
Grzesik, W., Niesłony, P. and Habrat, W. F. (2018) ‘Investigation of the tribological performance of AlTiN coated cutting tools in the machining of Ti6Al4V titanium alloy in terms of demanded tool life’, Eksploatacja i Niezawodnosc - Maintenance and Reliability, 21(1), pp. 153–158. doi:10.17531/ein.2019.1.17.
IEEE
W. Grzesik, P. Niesłony, and W. F. Habrat, “Investigation of the tribological performance of AlTiN coated cutting tools in the machining of Ti6Al4V titanium alloy in terms of demanded tool life,” Eksploatacja i Niezawodnosc - Maintenance and Reliability, vol. 21, no. 1, pp. 153–158, 2018, doi: 10.17531/ein.2019.1.17.
BibTeX
@article{grzesik2018investigation,
title = {{Investigation of the tribological performance of AlTiN coated cutting tools in the machining of Ti6Al4V titanium alloy in terms of demanded tool life}},
author = {Grzesik, Wit and Niesłony, Piotr and Habrat, Witold F.},
journal = {Eksploatacja i Niezawodnosc - Maintenance and Reliability},
year = {2018},
volume = {21},
number = {1},
pages = {153--158},
doi = {10.17531/ein.2019.1.17},
url = {https://doi.org/10.17531/ein.2019.1.17}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2019 | 1 | |
| 2020 | 1 | |
| 2022 | 3 | |
| 2023 | 3 | |
| 2024 | 1 | |
| 2025 | 2 | |
| 2026 | 1 |
Its field-weighted citation impact is 0.32: it has been cited 0.32 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Ti-6Al-4V titanium alloy
- tool wear
- tool life
- tribological properties
- friction coefficient
- specific cutting energy
- thermal softening
- cutting temperature
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Grzesik, W., Niesłony, P., & Habrat, W. F. (2018). Investigation of the tribological performance of AlTiN coated cutting tools in the machining of Ti6Al4V titanium alloy in terms of demanded tool life. Eksploatacja i Niezawodnosc - Maintenance and Reliability, 21(1), 153–158. https://doi.org/10.17531/ein.2019.1.17
How many times has this paper been cited?
12 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Eksploatacja i Niezawodnosc - Maintenance and Reliability: sign in and open the full text from this page.
Who wrote this paper?
Wit Grzesik, Piotr Niesłony, Witold F. Habrat.
What is the DOI of this paper?
10.17531/ein.2019.1.17, permanently at https://doi.org/10.17531/ein.2019.1.17. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.