Journal article · 2023 · Open access
Investigation of Solid Lubrication Processes of DLC Films with a Unique 6 Axes UHV Tribometer
Tribology online, 18(5), 239–248 · Published 30 August 2023 · DOI 10.2474/trol.18.239
In brief
“Investigation of Solid Lubrication Processes of DLC Films with a Unique 6 Axes UHV Tribometer” is a 2023 journal article by Antoine Normant and 3 co-authors, published in Tribology online. OpenAlex counts 3 citations as of 17 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Tribology online.
- Citations
- 3
- Most cited in
- 2025 (2)
- Field-weighted impact
- 0.30
- References
- 31
- Authors
- 4
Abstract
Among Diamond-Like Carbon (DLC) materials, hydrogenated amorphous carbon (a-C:H) coatings may exhibit super-low friction coefficients (< 0.01) under vacuum. A running-in phase is observed in the first few cycles of sliding before reaching a steady state of super-low friction. In this study, a unique ultra-high vacuum tribometer, with 4 different axes of motions and a 6 axes force sensor, is used to characterize the tribological behavior of a steel pin / a-C:H coated flat contact. An original crossing-tracks method is proposed to dissociate the respective roles of tribofilm build-up and surface modifications on the a-C:H in the achievement of super-low friction. A previously build-up tribofilm on the steel counterface shortens the running-in phase by 18 cycles and reduces the initial friction coefficient by 32%. Sliding on a previously rubbed area of the coating allows an additional initial friction reduction of 36%. Morphological and chemical investigations on the a-C:H coated flat using Atomic Force Microscopy and X-ray Photoelectron Spectroscopy reveal that the initial nanoasperities were smoothed, eventually leading to shallow matter transfers and tribofilm thickening on the counterface. Carbon-to-carbon bonds rupture and a reorganization in the carbon structure leads to an increase of the sp2/sp3 hybridization ratio.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Normant, A., Galipaud, J., Dubreuil, F., & Fontaine, J. (2023). Investigation of Solid Lubrication Processes of DLC Films with a Unique 6 Axes UHV Tribometer. Tribology online, 18(5), 239–248. https://doi.org/10.2474/trol.18.239
MLA 9
Normant, Antoine, et al. “Investigation of Solid Lubrication Processes of DLC Films with a Unique 6 Axes UHV Tribometer.” Tribology online, vol. 18, no. 5, 2023, pp. 239–248. https://doi.org/10.2474/trol.18.239.
Chicago
Normant, Antoine, Jules Galipaud, Frédéric Dubreuil, and Julien Fontaine. 2023. “Investigation of Solid Lubrication Processes of DLC Films with a Unique 6 Axes UHV Tribometer.” Tribology online 18 (5): 239–248. https://doi.org/10.2474/trol.18.239.
Harvard
Normant, A. et al. (2023) ‘Investigation of Solid Lubrication Processes of DLC Films with a Unique 6 Axes UHV Tribometer’, Tribology online, 18(5), pp. 239–248. doi:10.2474/trol.18.239.
IEEE
A. Normant, J. Galipaud, F. Dubreuil, and J. Fontaine, “Investigation of Solid Lubrication Processes of DLC Films with a Unique 6 Axes UHV Tribometer,” Tribology online, vol. 18, no. 5, pp. 239–248, 2023, doi: 10.2474/trol.18.239.
BibTeX
@article{normant2023investigation,
title = {{Investigation of Solid Lubrication Processes of DLC Films with a Unique 6 Axes UHV Tribometer}},
author = {Normant, Antoine and Galipaud, Jules and Dubreuil, Frédéric and Fontaine, Julien},
journal = {Tribology online},
year = {2023},
volume = {18},
number = {5},
pages = {239--248},
doi = {10.2474/trol.18.239},
url = {https://doi.org/10.2474/trol.18.239}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- diamond-like carbon
- solid lubrication
- surface modification
- friction coefficient
- sp2/sp3 hybridization
- matter transfer
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Normant, A., Galipaud, J., Dubreuil, F., & Fontaine, J. (2023). Investigation of Solid Lubrication Processes of DLC Films with a Unique 6 Axes UHV Tribometer. Tribology online, 18(5), 239–248. https://doi.org/10.2474/trol.18.239
How many times has this paper been cited?
3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Tribology online: sign in and open the full text from this page.
Who wrote this paper?
Antoine Normant, Jules Galipaud, Frédéric Dubreuil, Julien Fontaine.
What is the DOI of this paper?
10.2474/trol.18.239, permanently at https://doi.org/10.2474/trol.18.239. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.