Journal article · 2019 · Open access
Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy
Metals, 9(12), 1338 · Published 11 December 2019 · DOI 10.3390/met9121338
In brief
“Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy” is a 2019 journal article by Lakshmanan Selvam and 3 co-authors, published in Metals. OpenAlex counts 9 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Metals.
- Citations
- 9
- Most cited in
- 2022 (3)
- Field-weighted impact
- 0.56
- References
- 35
- Authors
- 4
Abstract
Over the past decade, the focus of the metal cutting industry has been on the improvement of tool life for achieving higher productivity and better finish. Researchers are attempting to reduce tool failure in several ways such as modified coating characteristics of a cutting tool, conventional coolant, cryogenic coolant, and cryogenic treated insert. In this study, a single layer coating was made on cutting carbide inserts with newly determined thickness. Coating thickness, presence of coating materials, and coated insert hardness were observed. This investigation also dealt with the effect of machining parameters on the cutting force, surface finish, and tool wear when turning Ti-6Al-4V alloy without coating and Physical Vapor Deposition (PVD)-AlCrN coated carbide cutting inserts under cryogenic conditions. The experimental results showed that AlCrN-based coated tools with cryogenic conditions developed reduced tool wear and surface roughness on the machined surface, and cutting force reductions were observed when a comparison was made with the uncoated carbide insert. The best optimal parameters of a cutting speed (Vc) of 215 m/min, feed rate (f) of 0.102 mm/rev, and depth of cut (doc) of 0.5 mm are recommended for turning titanium alloy using the multi-response TOPSIS technique.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Selvam, L., Murugesan, P. K., Dhananchezian, M., & Yuvaraj, N. (2019). Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy. Metals, 9(12), 1338. https://doi.org/10.3390/met9121338
MLA 9
Selvam, Lakshmanan, et al. “Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy.” Metals, vol. 9, no. 12, 2019, p. 1338. https://doi.org/10.3390/met9121338.
Chicago
Selvam, Lakshmanan, Pradeep Kumar Murugesan, M. Dhananchezian, and N. Yuvaraj. 2019. “Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy.” Metals 9 (12): 1338. https://doi.org/10.3390/met9121338.
Harvard
Selvam, L. et al. (2019) ‘Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy’, Metals, 9(12), p. 1338. doi:10.3390/met9121338.
IEEE
L. Selvam, P. K. Murugesan, M. Dhananchezian, and N. Yuvaraj, “Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy,” Metals, vol. 9, no. 12, p. 1338, 2019, doi: 10.3390/met9121338.
BibTeX
@article{selvam2019investigation,
title = {{Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy}},
author = {Selvam, Lakshmanan and Murugesan, Pradeep Kumar and Dhananchezian, M. and Yuvaraj, N.},
journal = {Metals},
year = {2019},
volume = {9},
number = {12},
pages = {1338},
doi = {10.3390/met9121338},
url = {https://doi.org/10.3390/met9121338}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2020 | 1 | |
| 2022 | 3 | |
| 2023 | 1 | |
| 2024 | 1 | |
| 2025 | 3 |
Its field-weighted citation impact is 0.56: it has been cited 0.56 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- AlCrN coating
- Ti-6Al-4V
- titanium alloy machining
- carbide inserts
- PVD coatings
- coating thickness
- tool wear
- surface roughness
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Selvam, L., Murugesan, P. K., Dhananchezian, M., & Yuvaraj, N. (2019). Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy. Metals, 9(12), 1338. https://doi.org/10.3390/met9121338
How many times has this paper been cited?
9 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Metals: sign in and open the PDF from this page.
Who wrote this paper?
Lakshmanan Selvam, Pradeep Kumar Murugesan, M. Dhananchezian, N. Yuvaraj.
What is the DOI of this paper?
10.3390/met9121338, permanently at https://doi.org/10.3390/met9121338. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.