Journal article · 2018 · Open access
Investigating tool wear mechanisms in machining of Ti-6Al-4V in flood coolant, dry and MQL conditions
Procedia Manufacturing, 26, 434–445 · Published 1 January 2018 · DOI 10.1016/j.promfg.2018.07.051
In brief
“Investigating tool wear mechanisms in machining of Ti-6Al-4V in flood coolant, dry and MQL conditions” is a 2018 journal article by Ashutosh Khatri and Muhammad Pervej Jahan, published in Procedia Manufacturing. OpenAlex counts 102 citations as of 17 November 2026, which puts it in the top 2% of works published in 2018 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at Procedia Manufacturing.
- Citations
- 102
- Most cited in
- 2022 (21)
- Field-weighted impact
- 4.45
- References
- 21
- Authors
- 2
Abstract
The objective of this study is to identify and explain tool wear mechanisms that dominate during machining of titanium alloy Ti-6Al-4V in dry, flood coolant, and minimum quantity lubrication (MQL) conditions. A series of experiments were conducted using end milling of Ti-6Al-4V by varying feed rate and depth of cut, while the cutting speed was kept constant at comparatively higher cutting speed. Both uncoated and titanium aluminum nitride (TiAlN)-coated carbide tools were used for machining Ti-6Al-4V at the same settings of parameters. It was observed that abrasion was the most dominant tool wear mechanism for all dry, flood coolant and MQL machining conditions. Edge chipping and tool nose wear were the next dominating tool wear mechanisms in conventional flood coolant machining, which may be associated with the thermal fatigue caused by the periodic cooling of tool tip from the high temperature generated during machining. On the other hand, adhesion was the second most dominant tool wear mechanism in the dry machining. Both the edge chipping and adhesion of chips to the cutting tools were reduced significantly in MQL machining. The delamination of coating film was observed when TiAlN-coated carbide tools were used for machining Ti-6Al-4V. The delamination was more significant in wet and MQL machining compared to dry machining, indicating the effectiveness of coated tools in dry machining condition compared to wet and MQL machining conditions. Among three conditions, MQL provided the least occurrences of tool wear, indicating suitability of MQL in productive machining of titanium alloys.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Khatri, A., & Jahan, M. P. (2018). Investigating tool wear mechanisms in machining of Ti-6Al-4V in flood coolant, dry and MQL conditions. Procedia Manufacturing, 26, 434–445. https://doi.org/10.1016/j.promfg.2018.07.051
MLA 9
Khatri, Ashutosh, and Muhammad Pervej Jahan. “Investigating tool wear mechanisms in machining of Ti-6Al-4V in flood coolant, dry and MQL conditions.” Procedia Manufacturing, vol. 26, 2018, pp. 434–445. https://doi.org/10.1016/j.promfg.2018.07.051.
Chicago
Khatri, Ashutosh and Muhammad Pervej Jahan. 2018. “Investigating tool wear mechanisms in machining of Ti-6Al-4V in flood coolant, dry and MQL conditions.” Procedia Manufacturing 26: 434–445. https://doi.org/10.1016/j.promfg.2018.07.051.
Harvard
Khatri, A. and Jahan, M. P. (2018) ‘Investigating tool wear mechanisms in machining of Ti-6Al-4V in flood coolant, dry and MQL conditions’, Procedia Manufacturing, 26, pp. 434–445. doi:10.1016/j.promfg.2018.07.051.
IEEE
A. Khatri and M. P. Jahan, “Investigating tool wear mechanisms in machining of Ti-6Al-4V in flood coolant, dry and MQL conditions,” Procedia Manufacturing, vol. 26, pp. 434–445, 2018, doi: 10.1016/j.promfg.2018.07.051.
BibTeX
@article{khatri2018investigating,
title = {{Investigating tool wear mechanisms in machining of Ti-6Al-4V in flood coolant, dry and MQL conditions}},
author = {Khatri, Ashutosh and Jahan, Muhammad Pervej},
journal = {Procedia Manufacturing},
year = {2018},
volume = {26},
pages = {434--445},
doi = {10.1016/j.promfg.2018.07.051},
url = {https://doi.org/10.1016/j.promfg.2018.07.051}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2019 | 8 | |
| 2020 | 9 | |
| 2021 | 13 | |
| 2022 | 21 | |
| 2023 | 12 | |
| 2024 | 15 | |
| 2025 | 17 | |
| 2026 | 7 |
Its field-weighted citation impact is 4.45: it has been cited 4.45 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- tool wear mechanisms
- Ti-6Al-4V
- titanium alloy machining
- minimum quantity lubrication
- dry machining
- flood coolant
- end milling
- abrasion
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Khatri, A., & Jahan, M. P. (2018). Investigating tool wear mechanisms in machining of Ti-6Al-4V in flood coolant, dry and MQL conditions. Procedia Manufacturing, 26, 434–445. https://doi.org/10.1016/j.promfg.2018.07.051
How many times has this paper been cited?
102 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Procedia Manufacturing: sign in and open the PDF from this page.
Who wrote this paper?
Ashutosh Khatri, Muhammad Pervej Jahan.
What is the DOI of this paper?
10.1016/j.promfg.2018.07.051, permanently at https://doi.org/10.1016/j.promfg.2018.07.051. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.