Journal article · 2017 · Open access

Interplay between Roughness and Haze of CVD Grown ZnO:B Layers for a-Si:H/μc-Si:H Solar Cells

Roksolana Kozak, F. Kurdesau

Journal of Materials Science and Engineering B, 7(1) · Published 28 February 2017 · DOI 10.17265/2161-6221/2017.1-2.002

Free PDFView at the publisherCite this paper

In brief

“Interplay between Roughness and Haze of CVD Grown ZnO:B Layers for a-Si:H/μc-Si:H Solar Cells” is a 2017 journal article by Roksolana Kozak and F. Kurdesau, published in Journal of Materials Science and Engineering B. OpenAlex counts 0 citations as of 16 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at Journal of Materials Science and Engineering B.

Citations
0
References
19
Authors
2

Abstract

A broad use of ZnO:B TCO (transparent conductive oxide) layers as a front contact material for amorphous (a-Si:H) and tandem (a-Si:H/μc-Si:H) silicon thin film solar cells is achieved due to an excellent combination of good optical transparency, electrical conductivity and rough surface structure.The latter provides a light trapping effect within the underlying absorber, which is characterized by the optical haze value, i.e. a ratio between diffuse and total transmittances.The synthesis of such kind of surfaces requires the precise optimization of deposition processes, which in turn may significantly affect the further formation of silicon absorber layers and, as a result, influence the solar cells performance.Following the industrial fabrication, one has to consider both the physical properties of deposited TCO layers (resistivity, optical transparency and haze) and their processing parameters (a deposition rate, adjustable for the enterprise production tact time, and an optimum material consumption for the lowest synthesis and reactor's cleaning costs).In the present study, the growth of ZnO:B layers by CVD (chemical vapour deposition) is discussed.The film properties and their production process characteristics were optimized in order to keep the balance between the optimum parameters of TCO layers, the best chemical conversion efficiency and the fastest deposition rate at various gas flows, pressure and temperatures.The highest attention was paid to obtain ZnO:B films with controllable optical haze, which was varied between 2 and 50% (at 600 nm wavelength) by changing the layer thickness and CVD process regimes.It was found that the crystallinity of subsequently deposited a-Si:H/μc-Si:H structures correlates with the optical haze and surface roughness of ZnO:B substrate layers, which leads to the significant effect on the light trapping and band-gap values of silicon films.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Kozak, R., & Kurdesau, F. (2017). Interplay between Roughness and Haze of CVD Grown ZnO:B Layers for a-Si:H/μc-Si:H Solar Cells. Journal of Materials Science and Engineering B, 7(1). https://doi.org/10.17265/2161-6221/2017.1-2.002

MLA 9

Kozak, Roksolana, and F. Kurdesau. “Interplay between Roughness and Haze of CVD Grown ZnO:B Layers for a-Si:H/μc-Si:H Solar Cells.” Journal of Materials Science and Engineering B, vol. 7, no. 1, 2017. https://doi.org/10.17265/2161-6221/2017.1-2.002.

Chicago

Kozak, Roksolana and F. Kurdesau. 2017. “Interplay between Roughness and Haze of CVD Grown ZnO:B Layers for a-Si:H/μc-Si:H Solar Cells.” Journal of Materials Science and Engineering B 7 (1). https://doi.org/10.17265/2161-6221/2017.1-2.002.

Harvard

Kozak, R. and Kurdesau, F. (2017) ‘Interplay between Roughness and Haze of CVD Grown ZnO:B Layers for a-Si:H/μc-Si:H Solar Cells’, Journal of Materials Science and Engineering B, 7(1). doi:10.17265/2161-6221/2017.1-2.002.

IEEE

R. Kozak and F. Kurdesau, “Interplay between Roughness and Haze of CVD Grown ZnO:B Layers for a-Si:H/μc-Si:H Solar Cells,” Journal of Materials Science and Engineering B, vol. 7, no. 1, 2017, doi: 10.17265/2161-6221/2017.1-2.002.

BibTeX

@article{kozak2017interplay,
  title     = {{Interplay between Roughness and Haze of CVD Grown ZnO:B Layers for a-Si:H/μc-Si:H Solar Cells}},
  author    = {Kozak, Roksolana and Kurdesau, F.},
  journal   = {Journal of Materials Science and Engineering B},
  year      = {2017},
  volume    = {7},
  number    = {1},
  doi       = {10.17265/2161-6221/2017.1-2.002},
  url       = {https://doi.org/10.17265/2161-6221/2017.1-2.002}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Thin-Film Transistor Technologies

  • transparent conducting oxides
  • surface roughness
  • optical haze
  • amorphous silicon
  • microcrystalline silicon
  • tandem solar cells
  • light trapping
  • chemical vapor deposition

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Kozak, R., & Kurdesau, F. (2017). Interplay between Roughness and Haze of CVD Grown ZnO:B Layers for a-Si:H/μc-Si:H Solar Cells. Journal of Materials Science and Engineering B, 7(1). https://doi.org/10.17265/2161-6221/2017.1-2.002

How many times has this paper been cited?

0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Journal of Materials Science and Engineering B.

Who wrote this paper?

Roksolana Kozak, F. Kurdesau.

What is the DOI of this paper?

10.17265/2161-6221/2017.1-2.002. The permanent link is https://doi.org/10.17265/2161-6221/2017.1-2.002.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.