Journal article · 2026 · Open access

In‐Process Magnetization for 3D Printing of Magnetorheological Elastomer with Heterogeneous Magnetic Profile for Anisotropic Actuation

Phillip Glass, David Hassouna, Udena Epitawala Arachchige, Hyeon Yun Jeong, Sung Hyun Park, Daeha Joung

Advanced Science, 13(50), e76045 · Published 12 June 2026 · DOI 10.1002/advs.76045

Open full textCite this paper

In brief

“In‐Process Magnetization for 3D Printing of Magnetorheological Elastomer with Heterogeneous Magnetic Profile for Anisotropic Actuation” is a 2026 journal article by Phillip Glass and 5 co-authors, published in Advanced Science. OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced Science.

Citations
1
Most cited in
2026 (1)
Field-weighted impact
1.29
References
53
Authors
6

Abstract

Soft magnetic actuators have gained significant interest for applications in minimally invasive medical robots, artificial muscles, soft robotic manipulators, and wearable bioelectronic interfaces, yet their functionality remains fundamentally limited by current magnetization strategies. To this end, a novel in-process printing and magnetization strategy with spatial and dynamic control of an external magnetic field during printing is developed to fabricate magnetorheological elastomers with fully customizable three-dimensional (3D) magnetization profiles. This method allows localized magnetic domain alignment in arbitrarily programmed orientations within a solid, enabling anisotropic actuation at micron to millimeter scales. The proposed method is highly sensitive to curing kinetics, material viscosity, and magnet positioning, which are characterized theoretically, experimentally, and in simulation. Structures magnetized in this way offer robust strain-sensing, information-encoding, and bio-inspired heterogeneous actuation capabilities. Demonstrations highlight this versatility, including a dragonfly with oppositely magnetized wings for tunable resonant actuation, an octopus-inspired swimmer whose magnetized legs reproduce aquatic locomotion, and a serpentine catheter with high degrees of freedom across 6 magnetic nodes. Together, these advances establish a versatile platform for designing magnetically responsive systems that couple programmable anisotropic actuation with biological complexity.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Glass, P., Hassouna, D., Arachchige, U. E., Jeong, H. Y., Park, S. H., & Joung, D. (2026). In‐Process Magnetization for 3D Printing of Magnetorheological Elastomer with Heterogeneous Magnetic Profile for Anisotropic Actuation. Advanced Science, 13(50), e76045. https://doi.org/10.1002/advs.76045

MLA 9

Glass, Phillip, et al. “In‐Process Magnetization for 3D Printing of Magnetorheological Elastomer with Heterogeneous Magnetic Profile for Anisotropic Actuation.” Advanced Science, vol. 13, no. 50, 2026, p. e76045. https://doi.org/10.1002/advs.76045.

Chicago

Glass, Phillip, David Hassouna, Udena Epitawala Arachchige, Hyeon Yun Jeong, Sung Hyun Park, and Daeha Joung. 2026. “In‐Process Magnetization for 3D Printing of Magnetorheological Elastomer with Heterogeneous Magnetic Profile for Anisotropic Actuation.” Advanced Science 13 (50): e76045. https://doi.org/10.1002/advs.76045.

Harvard

Glass, P. et al. (2026) ‘In‐Process Magnetization for 3D Printing of Magnetorheological Elastomer with Heterogeneous Magnetic Profile for Anisotropic Actuation’, Advanced Science, 13(50), p. e76045. doi:10.1002/advs.76045.

IEEE

P. Glass, D. Hassouna, U. E. Arachchige, H. Y. Jeong, S. H. Park, and D. Joung, “In‐Process Magnetization for 3D Printing of Magnetorheological Elastomer with Heterogeneous Magnetic Profile for Anisotropic Actuation,” Advanced Science, vol. 13, no. 50, p. e76045, 2026, doi: 10.1002/advs.76045.

BibTeX

@article{glass2026process,
  title     = {{In‐Process Magnetization for 3D Printing of Magnetorheological Elastomer with Heterogeneous Magnetic Profile for Anisotropic Actuation}},
  author    = {Glass, Phillip and Hassouna, David and Arachchige, Udena Epitawala and Jeong, Hyeon Yun and Park, Sung Hyun and Joung, Daeha},
  journal   = {Advanced Science},
  year      = {2026},
  volume    = {13},
  number    = {50},
  pages     = {e76045},
  doi       = {10.1002/advs.76045},
  url       = {https://doi.org/10.1002/advs.76045}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics

  • magnetorheological elastomers
  • 3D printing
  • curing kinetics
  • strain sensing
  • bio-inspired actuators
  • magnetic field control

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Glass, P., Hassouna, D., Arachchige, U. E., Jeong, H. Y., Park, S. H., & Joung, D. (2026). In‐Process Magnetization for 3D Printing of Magnetorheological Elastomer with Heterogeneous Magnetic Profile for Anisotropic Actuation. Advanced Science, 13(50), e76045. https://doi.org/10.1002/advs.76045

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Advanced Science: sign in and open the full text from this page.

Who wrote this paper?

Phillip Glass, David Hassouna, Udena Epitawala Arachchige, Hyeon Yun Jeong, Sung Hyun Park, Daeha Joung.

What is the DOI of this paper?

10.1002/advs.76045, permanently at https://doi.org/10.1002/advs.76045. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.