Journal article · 2012 · Open access
INFLUENCIA DE LOS PARÁMETROS DE SOLDADURA PARA EL PROCESO SMAW EN LA FORMACIÓN DE FERRITA DELTA DURANTE LA SOLDADURA DE ACEROS INOXIDABLES AUSTENÍTICOS
Revista Colombiana de Materiales · Published 28 February 2012 · DOI 10.17533/udea.rcm.11286
In brief
“INFLUENCIA DE LOS PARÁMETROS DE SOLDADURA PARA EL PROCESO SMAW EN LA FORMACIÓN DE FERRITA DELTA DURANTE LA SOLDADURA DE ACEROS INOXIDABLES AUSTENÍTICOS” is a 2012 journal article by Rosario Trujillo Camacho and Claudia Patricia Serna, published in Revista Colombiana de Materiales. OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at Revista Colombiana de Materiales.
- Citations
- 0
- References
- 5
- Authors
- 2
Abstract
La ferrita delta formada en la zona de fusión de la soldadura de aceros inoxidables austeníticos es caracterizada en este trabajo ya que representa un gran interés en el tema de la soldadura de estos aceros por su influencia en las propiedades mecánicas de la unión soldada y la prevención de fenómenos que se presentan en la solidificación como es la fisuración en caliente. En este trabajo, se muestra la influencia que tienen los parámetros de soldadura específicamente la entrada de calor, en la formación de ferrita delta en el depósito de la soldadura, con este objetivo se realizó el estudio utilizando como material base chapas de acero AISI 316L de 6 mm de espesor y tamaño de 100 x 100 mm con preparación de bisel en V. Como material de aporte se utilizó, electrodo E316L-16. La soldadura se realizó mediante el proceso de soldadura SMAW (Shielded Metal Arc Welding). Para el estudio se analizaron condiciones de alta y baja entrada de calor en el rango de 0.5 a 1.6 KJ/mm, para analizar diferencias en la microestructura formada en el depósito de soldadura, así como mediciones de ferrita delta formada en el cordón, por medio del ferritoscopio.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Camacho, R. T., & Serna, C. P. (2012). INFLUENCIA DE LOS PARÁMETROS DE SOLDADURA PARA EL PROCESO SMAW EN LA FORMACIÓN DE FERRITA DELTA DURANTE LA SOLDADURA DE ACEROS INOXIDABLES AUSTENÍTICOS. Revista Colombiana de Materiales. https://doi.org/10.17533/udea.rcm.11286
MLA 9
Camacho, Rosario Trujillo, and Claudia Patricia Serna. “INFLUENCIA DE LOS PARÁMETROS DE SOLDADURA PARA EL PROCESO SMAW EN LA FORMACIÓN DE FERRITA DELTA DURANTE LA SOLDADURA DE ACEROS INOXIDABLES AUSTENÍTICOS.” Revista Colombiana de Materiales, no. 2, 2012. https://doi.org/10.17533/udea.rcm.11286.
Chicago
Camacho, Rosario Trujillo and Claudia Patricia Serna. 2012. “INFLUENCIA DE LOS PARÁMETROS DE SOLDADURA PARA EL PROCESO SMAW EN LA FORMACIÓN DE FERRITA DELTA DURANTE LA SOLDADURA DE ACEROS INOXIDABLES AUSTENÍTICOS.” Revista Colombiana de Materiales (2). https://doi.org/10.17533/udea.rcm.11286.
Harvard
Camacho, R. T. and Serna, C. P. (2012) ‘INFLUENCIA DE LOS PARÁMETROS DE SOLDADURA PARA EL PROCESO SMAW EN LA FORMACIÓN DE FERRITA DELTA DURANTE LA SOLDADURA DE ACEROS INOXIDABLES AUSTENÍTICOS’, Revista Colombiana de Materiales. doi:10.17533/udea.rcm.11286.
IEEE
R. T. Camacho and C. P. Serna, “INFLUENCIA DE LOS PARÁMETROS DE SOLDADURA PARA EL PROCESO SMAW EN LA FORMACIÓN DE FERRITA DELTA DURANTE LA SOLDADURA DE ACEROS INOXIDABLES AUSTENÍTICOS,” Revista Colombiana de Materiales, no. 2, 2012, doi: 10.17533/udea.rcm.11286.
BibTeX
@article{camacho2012influencia,
title = {{INFLUENCIA DE LOS PARÁMETROS DE SOLDADURA PARA EL PROCESO SMAW EN LA FORMACIÓN DE FERRITA DELTA DURANTE LA SOLDADURA DE ACEROS INOXIDABLES AUSTENÍTICOS}},
author = {Camacho, Rosario Trujillo and Serna, Claudia Patricia},
journal = {Revista Colombiana de Materiales},
year = {2012},
number = {2},
doi = {10.17533/udea.rcm.11286},
url = {https://doi.org/10.17533/udea.rcm.11286}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- delta ferrite
- austenitic stainless steel
- shielded metal arc welding
- welding parameters
- heat input
- 316L stainless steel
- weld microstructure
- hot cracking
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Camacho, R. T., & Serna, C. P. (2012). INFLUENCIA DE LOS PARÁMETROS DE SOLDADURA PARA EL PROCESO SMAW EN LA FORMACIÓN DE FERRITA DELTA DURANTE LA SOLDADURA DE ACEROS INOXIDABLES AUSTENÍTICOS. Revista Colombiana de Materiales. https://doi.org/10.17533/udea.rcm.11286
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Revista Colombiana de Materiales: sign in and open the PDF from this page.
Who wrote this paper?
Rosario Trujillo Camacho, Claudia Patricia Serna.
What is the DOI of this paper?
10.17533/udea.rcm.11286, permanently at https://doi.org/10.17533/udea.rcm.11286. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.