Journal article · 2010 · Open access
Influence of Target Current on the Structure of Ti-Doped DLC Films
Advanced materials research, 105-106, 451–454 · Published 1 April 2010 · DOI 10.4028/www.scientific.net/amr.105-106.451
In brief
“Influence of Target Current on the Structure of Ti-Doped DLC Films” is a 2010 journal article by Cheng Biao Wang and 6 co-authors, published in Advanced materials research. OpenAlex counts 1 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.
- Citations
- 1
- Most cited in
- 2023 (1)
- References
- 6
- Authors
- 7
Abstract
Ti-doped DLC films were synthesized from C2H2 and Ti by ion beam deposition and magnetron sputtering, and the influence of Ti target current on the structures and the friction coefficients of Ti-doped DLC films were studied by SEM, AES, XPS, a ball-on-disk friction tester. The Ti content in Ti-doped DLC films is below 1at% when Ti target currents rise up to 3.5 A; but when Ti target current exceeds 3.5 A, Ti content in the films is obviously increased with increasing Ti target current. Ti-doped DLC films have a smooth dense surface with several particles dispersed in it and the surface morphology deposited with different Ti target currents is similar. With the augment of Ti target current, the ratio of sp3-C to sp2-C is almost a constant first, and then an obvious rise followed by an abrupt decrease is found; but only when Ti target current is above 5A, the ratio of TiC-C to sp2-C is obviously increased with Ti target current. The lowest friction coefficients are obtained for the Ti-doped DLC films with the highest ratio of sp3-C to sp2-C and a low ratio of TiC-C to sp2-C.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Wang, C. B., Fu, Z., Yue, W., Peng, Z. J., Yu, X., Lin, S. S., & Dai, M. J. (2010). Influence of Target Current on the Structure of Ti-Doped DLC Films. Advanced materials research, 105-106, 451–454. https://doi.org/10.4028/www.scientific.net/amr.105-106.451
MLA 9
Wang, Cheng Biao, et al. “Influence of Target Current on the Structure of Ti-Doped DLC Films.” Advanced materials research, vol. 105-106, 2010, pp. 451–454. https://doi.org/10.4028/www.scientific.net/amr.105-106.451.
Chicago
Wang, Cheng Biao, Zhiqiang Fu, Wen Yue, Zhi Jian Peng, Xiang Yu, Song Sheng Lin, and Ming Jiang Dai. 2010. “Influence of Target Current on the Structure of Ti-Doped DLC Films.” Advanced materials research 105-106: 451–454. https://doi.org/10.4028/www.scientific.net/amr.105-106.451.
Harvard
Wang, C. B. et al. (2010) ‘Influence of Target Current on the Structure of Ti-Doped DLC Films’, Advanced materials research, 105-106, pp. 451–454. doi:10.4028/www.scientific.net/amr.105-106.451.
IEEE
C. B. Wang et al., “Influence of Target Current on the Structure of Ti-Doped DLC Films,” Advanced materials research, vol. 105-106, pp. 451–454, 2010, doi: 10.4028/www.scientific.net/amr.105-106.451.
BibTeX
@article{wang2010influence,
title = {{Influence of Target Current on the Structure of Ti-Doped DLC Films}},
author = {Wang, Cheng Biao and Fu, Zhiqiang and Yue, Wen and Peng, Zhi Jian and Yu, Xiang and Lin, Song Sheng and Dai, Ming Jiang},
journal = {Advanced materials research},
year = {2010},
volume = {105-106},
pages = {451--454},
doi = {10.4028/www.scientific.net/amr.105-106.451},
url = {https://doi.org/10.4028/www.scientific.net/amr.105-106.451}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- target current
- ion beam deposition
- magnetron sputtering
- sp3/sp2 carbon ratio
- friction coefficient
- surface morphology
- titanium content
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Wang, C. B., Fu, Z., Yue, W., Peng, Z. J., Yu, X., Lin, S. S., & Dai, M. J. (2010). Influence of Target Current on the Structure of Ti-Doped DLC Films. Advanced materials research, 105-106, 451–454. https://doi.org/10.4028/www.scientific.net/amr.105-106.451
How many times has this paper been cited?
1 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advanced materials research: sign in and open the full text from this page.
Who wrote this paper?
Cheng Biao Wang, Zhiqiang Fu, Wen Yue, Zhi Jian Peng, Xiang Yu, Song Sheng Lin, Ming Jiang Dai.
What is the DOI of this paper?
10.4028/www.scientific.net/amr.105-106.451, permanently at https://doi.org/10.4028/www.scientific.net/amr.105-106.451. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.