Journal article · 2025 · Open access
Influence of SMAW and GMAW on mechanical, microstructural, and corrosion properties of high-carbon steel
Next research., 2(4), 101026 · Published 1 November 2025 · DOI 10.1016/j.nexres.2025.101026
In brief
“Influence of SMAW and GMAW on mechanical, microstructural, and corrosion properties of high-carbon steel” is a 2025 journal article by Ibrahim Momoh‐Bello Omiogbemi and 9 co-authors, published in Next research.. OpenAlex counts 3 citations as of 22 November 2026, which puts it in the top 4% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Next research..
- Citations
- 3
- Most cited in
- 2026 (3)
- Field-weighted impact
- 0.69
- References
- 50
- Authors
- 10
Abstract
• SMAW welding at 140A produced superior tensile strength (495 MPa) and elongation (15%) in high-carbon steel compared to GMAW, which showed reduced mechanical properties at higher currents. • The study establishes a comprehensive correlation between welding parameters, microstructural evolution, and resulting mechanical and corrosion properties in high-carbon steel with 1.33% carbon content. • Microstructural analysis revealed lath martensite formation in SMAW welds versus bainitic ferrite in GMAW welds, directly correlating with the observed mechanical performance differences. • SMAW exhibited exceptional corrosion resistance (0.008 mm/year) compared to GMAW (8.24 mm/year) in distilled water, making it more suitable for industrial applications requiring durability. This study evaluates the impact of Shielded Metal Arc Welding (SMAW) and Gas Metal Arc Welding (GMAW) on high carbon steel (HCS) type AISI 1080 with 1.33% carbon content. SMAW demonstrated superior performance, achieving the highest tensile strength (495 MPa) and elongation (15%) at 140 A, while GMAW at 120 A showed lower strength (424 MPa) and elongation (10.5%). Increased currents in GMAW (140 A) resulted in coarser grains, reduced strength (317 MPa), and elongation (7.5%). Hardness in all weld zones rose due to martensite formation. Microstructural analysis revealed lath martensite in SMAW and bainitic ferrite in GMAW samples. SMAW exhibited excellent corrosion resistance (0.008 mm/year) compared to GMAW (8.24 mm/year), making it more suitable for industrial applications requiring high strength and corrosion resistance.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Omiogbemi, I. M., Olatunji, C. E., Awopetu, G. A., Awwal, K. S., Jesuloluwa, S., Adeleke, A. A., Abuh, R. E., Ikubanni, P. P., Paramasivam, P., & Omotosho, E. (2025). Influence of SMAW and GMAW on mechanical, microstructural, and corrosion properties of high-carbon steel. Next research., 2(4), 101026. https://doi.org/10.1016/j.nexres.2025.101026
MLA 9
Omiogbemi, Ibrahim Momoh‐Bello, et al. “Influence of SMAW and GMAW on mechanical, microstructural, and corrosion properties of high-carbon steel.” Next research., vol. 2, no. 4, 2025, p. 101026. https://doi.org/10.1016/j.nexres.2025.101026.
Chicago
Omiogbemi, Ibrahim Momoh‐Bello, Christian Emmanuel Olatunji, Gabriel Ayomide Awopetu, Khadija Shehu Awwal, Seun Jesuloluwa, Adekunle Adekanni Adeleke, Rasheed Enechojo Abuh, Peter P. Ikubanni, Prabhu Paramasivam, and Emmanuel Omotosho. 2025. “Influence of SMAW and GMAW on mechanical, microstructural, and corrosion properties of high-carbon steel.” Next research. 2 (4): 101026. https://doi.org/10.1016/j.nexres.2025.101026.
Harvard
Omiogbemi, I. M. et al. (2025) ‘Influence of SMAW and GMAW on mechanical, microstructural, and corrosion properties of high-carbon steel’, Next research., 2(4), p. 101026. doi:10.1016/j.nexres.2025.101026.
IEEE
I. M. Omiogbemi et al., “Influence of SMAW and GMAW on mechanical, microstructural, and corrosion properties of high-carbon steel,” Next research., vol. 2, no. 4, p. 101026, 2025, doi: 10.1016/j.nexres.2025.101026.
BibTeX
@article{omiogbemi2025influence,
title = {{Influence of SMAW and GMAW on mechanical, microstructural, and corrosion properties of high-carbon steel}},
author = {Omiogbemi, Ibrahim Momoh‐Bello and Olatunji, Christian Emmanuel and Awopetu, Gabriel Ayomide and Awwal, Khadija Shehu and Jesuloluwa, Seun and Adeleke, Adekunle Adekanni and Abuh, Rasheed Enechojo and Ikubanni, Peter P. and Paramasivam, Prabhu and Omotosho, Emmanuel},
journal = {Next research.},
year = {2025},
volume = {2},
number = {4},
pages = {101026},
doi = {10.1016/j.nexres.2025.101026},
url = {https://doi.org/10.1016/j.nexres.2025.101026}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- shielded metal arc welding
- gas metal arc welding
- high-carbon steel
- tensile strength
- elongation
- corrosion resistance
- lath martensite
- bainitic ferrite
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Omiogbemi, I. M., Olatunji, C. E., Awopetu, G. A., Awwal, K. S., Jesuloluwa, S., Adeleke, A. A., Abuh, R. E., Ikubanni, P. P., Paramasivam, P., & Omotosho, E. (2025). Influence of SMAW and GMAW on mechanical, microstructural, and corrosion properties of high-carbon steel. Next research., 2(4), 101026. https://doi.org/10.1016/j.nexres.2025.101026
How many times has this paper been cited?
3 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Next research.: sign in and open the full text from this page.
Who wrote this paper?
Ibrahim Momoh‐Bello Omiogbemi, Christian Emmanuel Olatunji, Gabriel Ayomide Awopetu, Khadija Shehu Awwal, Seun Jesuloluwa, Adekunle Adekanni Adeleke, Rasheed Enechojo Abuh, Peter P. Ikubanni, Prabhu Paramasivam, Emmanuel Omotosho.
What is the DOI of this paper?
10.1016/j.nexres.2025.101026, permanently at https://doi.org/10.1016/j.nexres.2025.101026. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.