Journal article · 2011 · Open access
Influence of Pulsed-DC Power Frequency on Mechanical Properties and High Speed Drilling Application of a-C:H:Zr-x Coatings
Advanced materials research, 328-330, 861–867 · Published 2 September 2011 · DOI 10.4028/www.scientific.net/amr.328-330.861
In brief
“Influence of Pulsed-DC Power Frequency on Mechanical Properties and High Speed Drilling Application of a-C:H:Zr-x Coatings” is a 2011 journal article by W.H. Kao and 3 co-authors, published in Advanced materials research. OpenAlex counts 0 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.
- Citations
- 0
- References
- 20
- Authors
- 4
Abstract
The a-C:H:Zr-x coatings are deposited on micro-drills using a closed field unbalanced magnetron (CFUBM) sputtering system with pulsed-DC power frequencies in the range 30 kHz to 110 kHz (the x in the term a-C:H:Zr-x is the frequency varied in the deposition process). The hardness of the various coatings is systematically explored. Additionally, the machining performance of the coated micro-drills is investigated by conducting high-speed through-hole drilling tests utilizing Printed Circuit Board (PCB) specimens. The experimental results reveal that the a-C:H:Zr-70 coating has the highest hardness (42 GPa), while the a-C:H:Zr-110 coating has the lowest hardness (26 GPa). In addition, it is shown that the a-C:H:Zr-70 coating increases the life of the micro-drill by a factor of three compared to that of an uncoated micro-drill.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kao, W., Su, Y., Yao, S. H., & Liu, S. (2011). Influence of Pulsed-DC Power Frequency on Mechanical Properties and High Speed Drilling Application of a-C:H:Zr-x Coatings. Advanced materials research, 328-330, 861–867. https://doi.org/10.4028/www.scientific.net/amr.328-330.861
MLA 9
Kao, W.H., et al. “Influence of Pulsed-DC Power Frequency on Mechanical Properties and High Speed Drilling Application of a-C:H:Zr-x Coatings.” Advanced materials research, vol. 328-330, 2011, pp. 861–867. https://doi.org/10.4028/www.scientific.net/amr.328-330.861.
Chicago
Kao, W.H., Yan Su, Sun Hui Yao, and Sijia Liu. 2011. “Influence of Pulsed-DC Power Frequency on Mechanical Properties and High Speed Drilling Application of a-C:H:Zr-x Coatings.” Advanced materials research 328-330: 861–867. https://doi.org/10.4028/www.scientific.net/amr.328-330.861.
Harvard
Kao, W. et al. (2011) ‘Influence of Pulsed-DC Power Frequency on Mechanical Properties and High Speed Drilling Application of a-C:H:Zr-x Coatings’, Advanced materials research, 328-330, pp. 861–867. doi:10.4028/www.scientific.net/amr.328-330.861.
IEEE
W. Kao, Y. Su, S. H. Yao, and S. Liu, “Influence of Pulsed-DC Power Frequency on Mechanical Properties and High Speed Drilling Application of a-C:H:Zr-x Coatings,” Advanced materials research, vol. 328-330, pp. 861–867, 2011, doi: 10.4028/www.scientific.net/amr.328-330.861.
BibTeX
@article{kao2011influence,
title = {{Influence of Pulsed-DC Power Frequency on Mechanical Properties and High Speed Drilling Application of a-C:H:Zr-x Coatings}},
author = {Kao, W.H. and Su, Yan and Yao, Sun Hui and Liu, Sijia},
journal = {Advanced materials research},
year = {2011},
volume = {328-330},
pages = {861--867},
doi = {10.4028/www.scientific.net/amr.328-330.861},
url = {https://doi.org/10.4028/www.scientific.net/amr.328-330.861}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- hydrogenated amorphous carbon
- closed field unbalanced magnetron sputtering
- coating hardness
- high-speed drilling
- printed circuit board drilling
- mechanical properties
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Kao, W., Su, Y., Yao, S. H., & Liu, S. (2011). Influence of Pulsed-DC Power Frequency on Mechanical Properties and High Speed Drilling Application of a-C:H:Zr-x Coatings. Advanced materials research, 328-330, 861–867. https://doi.org/10.4028/www.scientific.net/amr.328-330.861
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advanced materials research: sign in and open the full text from this page.
Who wrote this paper?
W.H. Kao, Yan Su, Sun Hui Yao, Sijia Liu.
What is the DOI of this paper?
10.4028/www.scientific.net/amr.328-330.861, permanently at https://doi.org/10.4028/www.scientific.net/amr.328-330.861. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.