Journal article · 2024 · Open access
Influence of nitrogen and niobium incorporation in bcc-chromium coatings on microstructure and mechanical properties
Surface and Coatings Technology, 494, 131489 · Published 1 October 2024 · DOI 10.1016/j.surfcoat.2024.131489
In brief
“Influence of nitrogen and niobium incorporation in bcc-chromium coatings on microstructure and mechanical properties” is a 2024 journal article by Sagar Jathar and 5 co-authors, published in Surface and Coatings Technology. OpenAlex counts 11 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Surface and Coatings Technology.
- Citations
- 11
- Most cited in
- 2025 (6)
- Field-weighted impact
- 1.42
- References
- 45
- Authors
- 6
Abstract
Stoichiometric CrN and Cr:N with different nitrogen (N) content are of interest for hard coating applications. In the Cr-N material system, bcc-Cr rich coatings, containing a few percent of diluted N, provide tunability in microstructure and mechanical properties. Additionally, the incorporation of Nb into the CrN x coatings may further tailor the materials properties. In this work, bcc-CrN x and CrNbN x coatings were deposited by reactive magnetron sputtering, and their mechanical and microstructural characteristics were investigated as a function of N content. Depending on the N content, the phases observed by X-ray diffractometry (XRD) varied from metallic bcc-Cr, mixed bcc-Cr/h-Cr 2 N, to h-Cr 2 N/CrN. X-ray reflectivity (XRR), and scanning electron microscopy (SEM) measurements show that a dense and nearly columnar-free bcc-CrN x coatings was obtained at ~13–25 at.% of N, while CrNbN x coatings composed of dense, column-free, and featureless microstructure at a N content of ~10–20 at.%. The dense and nearly column-free microstructure composed of dispersion of Cr 2 N grains into the bcc-Cr matrix for both CrN x and CrNbN x coatings, as shown by high resolution transmission electron microscope analysis (HRTEM). Nanoindentation revealed a hardening of the coatings due to the grain refinement, solid solution strengthening, and variation in phase content. • Impact of nitrogen (N) content in Cr films on microstructure, phase, and mechanical properties • Demonstrated Nb incorporation in CrN x can further tune film properties. • Effect of solid solution hardening, phase formation, grain refinement with N in CrN x , CrNbN x films
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Jathar, S., Honnali, S. K., Farhadizadeh, A., le Febvrier, A., Odén, M., & Eklund, P. (2024). Influence of nitrogen and niobium incorporation in bcc-chromium coatings on microstructure and mechanical properties. Surface and Coatings Technology, 494, 131489. https://doi.org/10.1016/j.surfcoat.2024.131489
MLA 9
Jathar, Sagar, et al. “Influence of nitrogen and niobium incorporation in bcc-chromium coatings on microstructure and mechanical properties.” Surface and Coatings Technology, vol. 494, 2024, p. 131489. https://doi.org/10.1016/j.surfcoat.2024.131489.
Chicago
Jathar, Sagar, Sanath Kumar Honnali, Alireza Farhadizadeh, Arnaud le Febvrier, Magnus Odén, and Per Eklund. 2024. “Influence of nitrogen and niobium incorporation in bcc-chromium coatings on microstructure and mechanical properties.” Surface and Coatings Technology 494: 131489. https://doi.org/10.1016/j.surfcoat.2024.131489.
Harvard
Jathar, S. et al. (2024) ‘Influence of nitrogen and niobium incorporation in bcc-chromium coatings on microstructure and mechanical properties’, Surface and Coatings Technology, 494, p. 131489. doi:10.1016/j.surfcoat.2024.131489.
IEEE
S. Jathar, S. K. Honnali, A. Farhadizadeh, A. le Febvrier, M. Odén, and P. Eklund, “Influence of nitrogen and niobium incorporation in bcc-chromium coatings on microstructure and mechanical properties,” Surface and Coatings Technology, vol. 494, p. 131489, 2024, doi: 10.1016/j.surfcoat.2024.131489.
BibTeX
@article{jathar2024influence,
title = {{Influence of nitrogen and niobium incorporation in bcc-chromium coatings on microstructure and mechanical properties}},
author = {Jathar, Sagar and Honnali, Sanath Kumar and Farhadizadeh, Alireza and le Febvrier, Arnaud and Odén, Magnus and Eklund, Per},
journal = {Surface and Coatings Technology},
year = {2024},
volume = {494},
pages = {131489},
doi = {10.1016/j.surfcoat.2024.131489},
url = {https://doi.org/10.1016/j.surfcoat.2024.131489}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 1 | |
| 2025 | 6 | |
| 2026 | 4 |
Its field-weighted citation impact is 1.42: it has been cited 1.42 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- chromium nitride coatings
- bcc chromium
- nitrogen content
- Cr2N phase
- microstructure
- grain refinement
- solid solution strengthening
- phase formation
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Jathar, S., Honnali, S. K., Farhadizadeh, A., le Febvrier, A., Odén, M., & Eklund, P. (2024). Influence of nitrogen and niobium incorporation in bcc-chromium coatings on microstructure and mechanical properties. Surface and Coatings Technology, 494, 131489. https://doi.org/10.1016/j.surfcoat.2024.131489
How many times has this paper been cited?
11 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Surface and Coatings Technology: sign in and open the full text from this page.
Who wrote this paper?
Sagar Jathar, Sanath Kumar Honnali, Alireza Farhadizadeh, Arnaud le Febvrier, Magnus Odén, Per Eklund.
What is the DOI of this paper?
10.1016/j.surfcoat.2024.131489, permanently at https://doi.org/10.1016/j.surfcoat.2024.131489. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.