Preprint · 2021 · Open access
Influence of Defect States and Thickness of Interface Layer On High Efficiency of c-Si/a-Si:H Heterojunction Solar Cells With Higher Bandgap a-Si:H(p) Layer By Simulation
Research Square · Published 22 February 2021 · DOI 10.21203/rs.3.rs-210502/v1
In brief
“Influence of Defect States and Thickness of Interface Layer On High Efficiency of c-Si/a-Si:H Heterojunction Solar Cells With Higher Bandgap a-Si:H(p) Layer By Simulation” is a 2021 preprint by Venkanna Kanneboina, published in Research Square. OpenAlex counts 0 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Research Square.
- Citations
- 0
- References
- 36
- Authors
- 1
Abstract
This paper presents the influence of defect states and thickness of interface layer on high efficiency of c-Si/a-Si:H heterojunction solar cells with higher bandgap emitter a-Si:H(p) layer by AFORSHET simulation tool. At first, the performance of Ag/ZnO/a-Si:H(p)/ a-Si:H(i)/ c-Si(n)/ a-Si:H(i)/ a-Si:H(n)/Ag heterojunction solar cells was studied by altering the thickness of a-Si:H(p) and a-Si:H(i) layers. The best values of open circuit voltage (Voc) (764.8 mV), short circuit current density (Jsc) (43.15 mA/cm2), fill factor (FF) (85.71) and efficiency(ɳ) (28.28%) were obtained at 3 nm of a-Si:H(p) and a-Si:H(i) layer. In the same structure, c-Si(n) interface was introduced in between c-Si(n) and a-Si:H(i) layer. It is found that the solar cell performance was not changed by varying defect density from 109-1014 cm-3 for thin (5 and 10 nm) interface layer and estimated values are 761.7 mV, 38.83 mA/cm2, 86.09%, 25.46% correspond to Voc, Jsc, FF, ɳ respectively. For very thick interface layer, defect density has shown huge impact on the device performance. At 1 µm, the Voc, FF and ɳ values have been changed from 760.2 to 653.2 mV, 85.9 to 80.76% and 22.94 to 18.47% for the defect density of 109 to 1014 cm-3 respectively.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kanneboina, V. (2021). Influence of Defect States and Thickness of Interface Layer On High Efficiency of c-Si/a-Si:H Heterojunction Solar Cells With Higher Bandgap a-Si:H(p) Layer By Simulation. Research Square. https://doi.org/10.21203/rs.3.rs-210502/v1
MLA 9
Kanneboina, Venkanna. “Influence of Defect States and Thickness of Interface Layer On High Efficiency of c-Si/a-Si:H Heterojunction Solar Cells With Higher Bandgap a-Si:H(p) Layer By Simulation.” Research Square, 2021. https://doi.org/10.21203/rs.3.rs-210502/v1.
Chicago
Kanneboina, Venkanna. 2021. “Influence of Defect States and Thickness of Interface Layer On High Efficiency of c-Si/a-Si:H Heterojunction Solar Cells With Higher Bandgap a-Si:H(p) Layer By Simulation.” Research Square. https://doi.org/10.21203/rs.3.rs-210502/v1.
Harvard
Kanneboina, V. (2021) ‘Influence of Defect States and Thickness of Interface Layer On High Efficiency of c-Si/a-Si:H Heterojunction Solar Cells With Higher Bandgap a-Si:H(p) Layer By Simulation’, Research Square. doi:10.21203/rs.3.rs-210502/v1.
IEEE
V. Kanneboina, “Influence of Defect States and Thickness of Interface Layer On High Efficiency of c-Si/a-Si:H Heterojunction Solar Cells With Higher Bandgap a-Si:H(p) Layer By Simulation,” Research Square, 2021, doi: 10.21203/rs.3.rs-210502/v1.
BibTeX
@misc{kanneboina2021influence,
title = {{Influence of Defect States and Thickness of Interface Layer On High Efficiency of c-Si/a-Si:H Heterojunction Solar Cells With Higher Bandgap a-Si:H(p) Layer By Simulation}},
author = {Kanneboina, Venkanna},
howpublished = {Research Square},
year = {2021},
doi = {10.21203/rs.3.rs-210502/v1},
url = {https://doi.org/10.21203/rs.3.rs-210502/v1}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies
- defect states
- interface thickness
- open-circuit voltage
- defect density
- solar cell efficiency
- AFORS-HET simulation
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Kanneboina, V. (2021). Influence of Defect States and Thickness of Interface Layer On High Efficiency of c-Si/a-Si:H Heterojunction Solar Cells With Higher Bandgap a-Si:H(p) Layer By Simulation. Research Square. https://doi.org/10.21203/rs.3.rs-210502/v1
How many times has this paper been cited?
0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Research Square.
Who wrote this paper?
Venkanna Kanneboina.
What is the DOI of this paper?
10.21203/rs.3.rs-210502/v1. The permanent link is https://doi.org/10.21203/rs.3.rs-210502/v1.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.