Dissertation · 2016 · Open access

Influence of cyclic flexural deformation on the torsional resistance of CM files in comparison to conventional NITI instruments

Eufemia Carolina Peláez Acosta

Americanae (AECID Library) · Published 16 July 2016

Open full textCite this paper

In brief

“Influence of cyclic flexural deformation on the torsional resistance of CM files in comparison to conventional NITI instruments” is a 2016 dissertation by Eufemia Carolina Peláez Acosta, published in Americanae (AECID Library). OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at Americanae (AECID Library).

Citations
0
Authors
1

Abstract

As propriedades mecânicas dos instrumentos endodônticos são afetadas por fatores como microestrutura, diâmetro, geometria, composição química, e tratamentos termomecânicos aplicados durante o processo de fabricação. Os instrumentos de NiTi com Memória Controlada (CM) sofrem um tratamento térmico especial que os tornammais flexíveis e resistentes à fadiga que instrumentos de NiTi convencional. O objetivo deste estudo é avaliar como a fadiga influencia nas propriedades torcionais dos instrumentos CM, quando comparados com instrumentos superelásticos (SE) com geometria e características dimensionais similares. Instrumentos novos Hyflex CM (HF; Coltene/ Whaladent Inc.), Typhoon CM (TYP; Clinician´s Choice Dental Products), RaCe (RC; FKG, La-Chaux De Fonds, Switzerland) e Protaper Universal F2 (F2; Dentsply Maillefer, Ballaigues, Switzerland), todos de calibre e conicidade 30/.06, foram avaliados. Características geométricas e dimensionais como o diâmetro, comprimento de pitch e ângulo helicoidal foram medidos ao longo da parte ativa dos instrumentos. A fadiga flexural (Nf) e a resistência torcional para cada instrumento (n=10) foram determinadas de acordo com a especificação ISO-3630. Dez novos instrumentos de cada sistema foram fadigados a 3/4 de Nf e depois submetidos à torção até a ruptura. Os dados foram analisados utilizando o teste ANOVA (=.05). A superfície longitudinal, bem como a superfície de fratura após a fadiga foi examinada com um microscópio eletrônico de varredura (MEV). Os resultados mostram que os instrumentos CM tiveram valores de Nf significativamente maiores quando comparados aos instrumentos SE, com HF exibindo o maior Nf (P = .001). Os valores de torque médio para F2 foram os mais elevados (P = .001), seguido de TYP, HF e RC. Instrumentos CM pré-carregados a 3/4 de Nf e submetidos à torção até a ruptura tiveram valores de torque menores quando comparados aos instrumentos não carregados (HF P = .003; TYP P =.001), enquanto os instrumentos SE não apresentaram diferenças significativas (F2 P = .059; RC P =.079). A superfície de fratura dos instrumentos CM mostraram maiores superfícies lisas de fraturas e menores regiões de dimples, em relação aos instrumentos SE. Conclui-se que a vida em fadiga dos instrumentos CM foi significativamente maior quando comparada aos instrumentos SE, com o instrumento HF apresentando o valor de Nf maior. Os valores de torque para F2 foram maiores entre todos os instrumentos. Portanto a resistência torcional dos instrumentos CM pode ser comprometida após o pré carregamento em fadiga.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Acosta, E. C. P. (2016). Influence of cyclic flexural deformation on the torsional resistance of CM files in comparison to conventional NITI instruments. Americanae (AECID Library). http://hdl.handle.net/1843/ODON-ACWP5R

MLA 9

Acosta, Eufemia Carolina Peláez. “Influence of cyclic flexural deformation on the torsional resistance of CM files in comparison to conventional NITI instruments.” Americanae (AECID Library), 2016. http://hdl.handle.net/1843/ODON-ACWP5R.

Chicago

Acosta, Eufemia Carolina Peláez. 2016. “Influence of cyclic flexural deformation on the torsional resistance of CM files in comparison to conventional NITI instruments.” Americanae (AECID Library). http://hdl.handle.net/1843/ODON-ACWP5R.

Harvard

Acosta, E. C. P. (2016) ‘Influence of cyclic flexural deformation on the torsional resistance of CM files in comparison to conventional NITI instruments’, Americanae (AECID Library). Available at: http://hdl.handle.net/1843/ODON-ACWP5R.

IEEE

E. C. P. Acosta, “Influence of cyclic flexural deformation on the torsional resistance of CM files in comparison to conventional NITI instruments,” Americanae (AECID Library), 2016.

BibTeX

@phdthesis{acosta2016influence,
  title     = {{Influence of cyclic flexural deformation on the torsional resistance of CM files in comparison to conventional NITI instruments}},
  author    = {Acosta, Eufemia Carolina Peláez},
  year      = {2016},
  url       = {http://hdl.handle.net/1843/ODON-ACWP5R}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Health Sciences › Dentistry › Oral Surgery › Endodontics and Root Canal Treatments

  • torsional resistance
  • endodontic files
  • superelastic NiTi
  • fatigue resistance
  • fractography
  • HyFlex CM
  • race
  • instrument breakage

Work with this paper

Most-cited papers in Dentistry

All highly cited Dentistry papers

Questions about this paper

How do I cite this paper in APA style?

Acosta, E. C. P. (2016). Influence of cyclic flexural deformation on the torsional resistance of CM files in comparison to conventional NITI instruments. Americanae (AECID Library). http://hdl.handle.net/1843/ODON-ACWP5R

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Americanae (AECID Library): sign in and open the full text from this page.

Who wrote this paper?

Eufemia Carolina Peláez Acosta.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.