Journal article · 2014 · Open access

Influence of composition, structure and testing atmosphere on the tribological performance of W–S–N coatings

Jill Sundberg, Harald Nyberg, Erik Särhammar, Tomas Nyberg, Staffan Jacobson, Ulf Jansson

Surface and Coatings Technology, 258, 86–94 · Published 5 October 2014 · DOI 10.1016/j.surfcoat.2014.09.061

Open full textCite this paper

In brief

“Influence of composition, structure and testing atmosphere on the tribological performance of W–S–N coatings” is a 2014 journal article by Jill Sundberg and 5 co-authors, published in Surface and Coatings Technology. OpenAlex counts 34 citations as of 17 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Surface and Coatings Technology.

Citations
34
Most cited in
2018 (4)
Field-weighted impact
1.39
References
32
Authors
6

Abstract

W-S-N coatings deposited by reactive magnetron sputtering offer the possibility of ultra-low friction in unlubricated sliding. In this work, W-S-N coatings of different composition and structure have been deposited, characterised and evaluated with respect to the tribological performance and tribofilm formation. The composition was varied by changing the flow of N-2 into the deposition chamber, leading to N contents ranging from 0 to 47 at.%. W-S-N coatings deposited without substrate heating are amorphous, while substrate heating results in coatings containing nanocystalline tungsten sulphide (WSx) for low N contents, and nanocrystalline tungsten nitride (WyN) at a high N content. The coatings were tribologically tested against steel balls in four different atmospheres dry N-2, dry air, humid N-2 and humid air to study the effects of atmospheric O-2 and H2O both separately and simultaneously. In dry N-2, all coatings exhibited an excellent performance with very low friction (mu approximate to 0.02) and wear. Notably, this included the N-richest and hardest coating, containing nanocrystalline WyN and only 13 at.% of S. The friction and wear increased on changing the atmosphere, in the order of dry air-humid N-2-humid air. In these three non-inert atmospheres, the friction and wear also increased with increasing N content of the coating. It is thus concluded that the presence of O-2, the presence of H2O, and a high N content (i.e., low Wand S contents) are three factors increasing the risk of high friction and wear, especially when occurring together. Raman spectroscopy mapping of the contact surfaces on the coatings and the balls showed that low friction and wear is connected to the presence of WS2 tribofilms in the contact, and that the three previously mentioned factors affect the formation and function of this tribofilm.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Sundberg, J., Nyberg, H., Särhammar, E., Nyberg, T., Jacobson, S., & Jansson, U. (2014). Influence of composition, structure and testing atmosphere on the tribological performance of W–S–N coatings. Surface and Coatings Technology, 258, 86–94. https://doi.org/10.1016/j.surfcoat.2014.09.061

MLA 9

Sundberg, Jill, et al. “Influence of composition, structure and testing atmosphere on the tribological performance of W–S–N coatings.” Surface and Coatings Technology, vol. 258, 2014, pp. 86–94. https://doi.org/10.1016/j.surfcoat.2014.09.061.

Chicago

Sundberg, Jill, Harald Nyberg, Erik Särhammar, Tomas Nyberg, Staffan Jacobson, and Ulf Jansson. 2014. “Influence of composition, structure and testing atmosphere on the tribological performance of W–S–N coatings.” Surface and Coatings Technology 258: 86–94. https://doi.org/10.1016/j.surfcoat.2014.09.061.

Harvard

Sundberg, J. et al. (2014) ‘Influence of composition, structure and testing atmosphere on the tribological performance of W–S–N coatings’, Surface and Coatings Technology, 258, pp. 86–94. doi:10.1016/j.surfcoat.2014.09.061.

IEEE

J. Sundberg, H. Nyberg, E. Särhammar, T. Nyberg, S. Jacobson, and U. Jansson, “Influence of composition, structure and testing atmosphere on the tribological performance of W–S–N coatings,” Surface and Coatings Technology, vol. 258, pp. 86–94, 2014, doi: 10.1016/j.surfcoat.2014.09.061.

BibTeX

@article{sundberg2014influence,
  title     = {{Influence of composition, structure and testing atmosphere on the tribological performance of W–S–N coatings}},
  author    = {Sundberg, Jill and Nyberg, Harald and Särhammar, Erik and Nyberg, Tomas and Jacobson, Staffan and Jansson, Ulf},
  journal   = {Surface and Coatings Technology},
  year      = {2014},
  volume    = {258},
  pages     = {86--94},
  doi       = {10.1016/j.surfcoat.2014.09.061},
  url       = {https://doi.org/10.1016/j.surfcoat.2014.09.061}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201722
201844
201944
202044
202144
202244
202322
202422
202522
202622

Its field-weighted citation impact is 1.39: it has been cited 1.39 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • tungsten nitride
  • tribofilm formation
  • ultra-low friction
  • dry sliding wear
  • reactive magnetron sputtering
  • nitrogen content
  • substrate heating
  • nanocrystalline coatings

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Sundberg, J., Nyberg, H., Särhammar, E., Nyberg, T., Jacobson, S., & Jansson, U. (2014). Influence of composition, structure and testing atmosphere on the tribological performance of W–S–N coatings. Surface and Coatings Technology, 258, 86–94. https://doi.org/10.1016/j.surfcoat.2014.09.061

How many times has this paper been cited?

34 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Surface and Coatings Technology: sign in and open the full text from this page.

Who wrote this paper?

Jill Sundberg, Harald Nyberg, Erik Särhammar, Tomas Nyberg, Staffan Jacobson, Ulf Jansson.

What is the DOI of this paper?

10.1016/j.surfcoat.2014.09.061, permanently at https://doi.org/10.1016/j.surfcoat.2014.09.061. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.