Journal article · 2019 · Open access
Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304
Materials Research Express, 6(8), 086585 · Published 1 May 2019 · DOI 10.1088/2053-1591/ab1e59
In brief
“Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304” is a 2019 journal article by Neeraj Sharma and Kapil Gupta, published in Materials Research Express. OpenAlex counts 60 citations as of 17 November 2026, which puts it in the top 7% of works published in 2019 by citations. It is open access: the full text is free to read at Materials Research Express.
- Citations
- 60
- Most cited in
- 2023 (12)
- Field-weighted impact
- 3.66
- References
- 28
- Authors
- 2
Abstract
Machining of difficult-to-machine materials has always been a prime area of investigation for researchers. With regard to that tool wear and surface roughness are some of the most important machinability indicators to evaluate the performance of machining processes. This paper reports a part of investigation conducted on dry turning of SS 304 using uncoated and multilayer coated carbide tools. In this work, the influence of machining parameters on tool wear and surface roughness is studied. The mechanisms of both crater wear and flank wear have been analyzed through scanned electron microscopy and energy dispersive spectroscopy. Moreover, surface roughness (mean roughness depth) profiles have been investigated. Carbide tools coated with TiAlN/TiN alternate layers outperformed uncoated tools with a significant reduction in tool flank wear and mean roughness depth (R z ). The percentage reductions in tool flank wear and R z were investigated at different levels of input machining parameters. On average approximately 25% reduction in tool wear and 15% reduction in R z was observed using coated tool than uncoated tool. Furthermore, the tool life has been improved by approximately 200% after using coated tools. Comparatively less irregular surface while machining with coated tools has been found than uncoated tools. The research is also complemented with a short chip morphology study. The present work recommends the use of multilayer TiAlN/TiN coating on carbide tools for machining of SS 304 under dry conditions.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Sharma, N., & Gupta, K. (2019). Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304. Materials Research Express, 6(8), 086585. https://doi.org/10.1088/2053-1591/ab1e59
MLA 9
Sharma, Neeraj, and Kapil Gupta. “Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304.” Materials Research Express, vol. 6, no. 8, 2019, p. 086585. https://doi.org/10.1088/2053-1591/ab1e59.
Chicago
Sharma, Neeraj and Kapil Gupta. 2019. “Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304.” Materials Research Express 6 (8): 086585. https://doi.org/10.1088/2053-1591/ab1e59.
Harvard
Sharma, N. and Gupta, K. (2019) ‘Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304’, Materials Research Express, 6(8), p. 086585. doi:10.1088/2053-1591/ab1e59.
IEEE
N. Sharma and K. Gupta, “Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304,” Materials Research Express, vol. 6, no. 8, p. 086585, 2019, doi: 10.1088/2053-1591/ab1e59.
BibTeX
@article{sharma2019influence,
title = {{Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304}},
author = {Sharma, Neeraj and Gupta, Kapil},
journal = {Materials Research Express},
year = {2019},
volume = {6},
number = {8},
pages = {086585},
doi = {10.1088/2053-1591/ab1e59},
url = {https://doi.org/10.1088/2053-1591/ab1e59}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2019 | 2 | |
| 2020 | 7 | |
| 2021 | 8 | |
| 2022 | 10 | |
| 2023 | 12 | |
| 2024 | 10 | |
| 2025 | 4 | |
| 2026 | 7 |
Its field-weighted citation impact is 3.66: it has been cited 3.66 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- dry turning
- 304 stainless steel
- coated carbide tools
- tool wear
- surface roughness
- tool life
- crater wear
- flank wear
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Sharma, N., & Gupta, K. (2019). Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304. Materials Research Express, 6(8), 086585. https://doi.org/10.1088/2053-1591/ab1e59
How many times has this paper been cited?
60 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Materials Research Express: sign in and open the PDF from this page.
Who wrote this paper?
Neeraj Sharma, Kapil Gupta.
What is the DOI of this paper?
10.1088/2053-1591/ab1e59, permanently at https://doi.org/10.1088/2053-1591/ab1e59. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.