Journal article · 2025 · Open access

Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys

Luís Olmos, O. Jiménez, Ivon Alanis–Fuerte, Francisco Alvarado-Hernández, Jorge Chávez, Bertha Alejandra Olmos, M. Flores-Jiménez, David Israel Bravo-Bárcenas, Martín Flores

Coatings, 15(9), 1103 · Published 20 September 2025 · DOI 10.3390/coatings15091103

Open PDFView at the publisherCite this paper

In brief

“Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys” is a 2025 journal article by Luís Olmos and 8 co-authors, published in Coatings. OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Coatings.

Citations
1
Most cited in
2026 (1)
Field-weighted impact
0.16
References
35
Authors
9

Abstract

Cu–Al–Ni shape memory alloys (SMAs) are attractive for structural and functional applications due to their cost-effectiveness and shape memory behavior. This study systematically investigated the effect of beryllium (Be) addition on the phase stability, microstructure, transformation temperatures, mechanical hardness, corrosion resistance, and wear behavior of Cu–Al–Ni alloys. Alloys with Be contents ranging from 0 to 1.5 wt.% were fabricated via arc melting and subjected to thermal treatment. Characterization techniques included dilatometry, X-ray diffraction (XRD), microhardness testing, potentiodynamic polarization, and pin-on-flat wear testing. The results showed that Be additions ≤ 0.4 wt.% stabilized the martensitic β′ phase, while higher concentrations favored the formation of austenitic β phase with a BCC structure. Hardness increased with Be content, especially in austenitic samples. Corrosion tests revealed that while the 0.2 wt.% Be alloy exhibited the most positive corrosion potential (Ecorr), it also had a higher corrosion rate. Overall, corrosion resistance declined with Be concentrations ≥ 0.6 wt.%. Wear tests demonstrated improved resistance in martensitic alloys, attributed to pseudoplastic deformation. These findings highlight the dual role of Be in modifying phase stability and functional properties, offering useful guidance for designing Cu-based SMAs with tailored performance.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Olmos, L., Jiménez, O., Alanis–Fuerte, I., Alvarado-Hernández, F., Chávez, J., Olmos, B. A., Flores-Jiménez, M., Bravo-Bárcenas, D. I., & Flores, M. (2025). Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys. Coatings, 15(9), 1103. https://doi.org/10.3390/coatings15091103

MLA 9

Olmos, Luís, et al. “Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys.” Coatings, vol. 15, no. 9, 2025, p. 1103. https://doi.org/10.3390/coatings15091103.

Chicago

Olmos, Luís, O. Jiménez, Ivon Alanis–Fuerte, Francisco Alvarado-Hernández, Jorge Chávez, Bertha Alejandra Olmos, M. Flores-Jiménez, David Israel Bravo-Bárcenas, and Martín Flores. 2025. “Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys.” Coatings 15 (9): 1103. https://doi.org/10.3390/coatings15091103.

Harvard

Olmos, L. et al. (2025) ‘Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys’, Coatings, 15(9), p. 1103. doi:10.3390/coatings15091103.

IEEE

L. Olmos et al., “Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys,” Coatings, vol. 15, no. 9, p. 1103, 2025, doi: 10.3390/coatings15091103.

BibTeX

@article{olmos2025influence,
  title     = {{Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys}},
  author    = {Olmos, Luís and Jiménez, O. and Alanis–Fuerte, Ivon and Alvarado-Hernández, Francisco and Chávez, Jorge and Olmos, Bertha Alejandra and Flores-Jiménez, M. and Bravo-Bárcenas, David Israel and Flores, Martín},
  journal   = {Coatings},
  year      = {2025},
  volume    = {15},
  number    = {9},
  pages     = {1103},
  doi       = {10.3390/coatings15091103},
  url       = {https://doi.org/10.3390/coatings15091103}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • Cu-Al-Ni shape memory alloy
  • beryllium addition
  • phase stability
  • transformation temperature
  • microhardness
  • corrosion resistance
  • wear behavior

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Olmos, L., Jiménez, O., Alanis–Fuerte, I., Alvarado-Hernández, F., Chávez, J., Olmos, B. A., Flores-Jiménez, M., Bravo-Bárcenas, D. I., & Flores, M. (2025). Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys. Coatings, 15(9), 1103. https://doi.org/10.3390/coatings15091103

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Coatings: sign in and open the PDF from this page.

Who wrote this paper?

Luís Olmos, O. Jiménez, Ivon Alanis–Fuerte, Francisco Alvarado-Hernández, Jorge Chávez, Bertha Alejandra Olmos, M. Flores-Jiménez, David Israel Bravo-Bárcenas, Martín Flores.

What is the DOI of this paper?

10.3390/coatings15091103, permanently at https://doi.org/10.3390/coatings15091103. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.