Conference paper · 2015 · Open access
INFLUENCE OF ANNEALING TEMPERATURE ON THE RECRYSTALLIZATION OF THE FERRITIC STAINLESS STEEL
International Symposium on Crystallography, 25 · Published 1 January 2015 · DOI 10.5151/phypro-sic100-025
In brief
“INFLUENCE OF ANNEALING TEMPERATURE ON THE RECRYSTALLIZATION OF THE FERRITIC STAINLESS STEEL” is a 2015 conference paper by Ariane Neves de Moura and 3 co-authors, published in International Symposium on Crystallography. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at International Symposium on Crystallography.
- Citations
- 0
- Authors
- 4
Abstract
Ferritic stainless steels are widely used in mechanical conformation by drawing. The objective of this paper is to study the annealing temperature effect on the recrystallization of the ferritic stainless steel AISI 430 containing niobium in order to improve its drawability. Samples of this steel was reduced 85% in thickness by cold rolled after annealed at 700C to 1000C for 25 seconds. The technique used for the characterization of hot rolled and annealed samples was the Electron Backscatter Diffraction (EBSD). The analysis was performed in a Scanning Electron Microscope (LaB 6 ). The step used to hot rolled and annealed samples was 2 m and 6 m respectively. The data processing was done in OIM (Orientation Imaging Micrograph) software. The results show the evolution of recrystallization with increasing temperature. The changes in the microstructure was observed by the image quality map and the increased of high angle boundary fraction by the grain boundary map. The complete recrystallization was obtained at 850C. The grain size increases when the annealing temperature increases.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
de Moura, A. N., de Oliveira, T. R., Pontes, K. D. S., & Filho, A. I. (2015). INFLUENCE OF ANNEALING TEMPERATURE ON THE RECRYSTALLIZATION OF THE FERRITIC STAINLESS STEEL. International Symposium on Crystallography, 25. https://doi.org/10.5151/phypro-sic100-025
MLA 9
de Moura, Ariane Neves, et al. “INFLUENCE OF ANNEALING TEMPERATURE ON THE RECRYSTALLIZATION OF THE FERRITIC STAINLESS STEEL.” International Symposium on Crystallography, 2015, p. 25. https://doi.org/10.5151/phypro-sic100-025.
Chicago
de Moura, Ariane Neves, Tarcísio Reis de Oliveira, Kassya da Silva Pontes, and André Itman Filho. 2015. “INFLUENCE OF ANNEALING TEMPERATURE ON THE RECRYSTALLIZATION OF THE FERRITIC STAINLESS STEEL.” International Symposium on Crystallography: 25. https://doi.org/10.5151/phypro-sic100-025.
Harvard
de Moura, A. N. et al. (2015) ‘INFLUENCE OF ANNEALING TEMPERATURE ON THE RECRYSTALLIZATION OF THE FERRITIC STAINLESS STEEL’, International Symposium on Crystallography, p. 25. doi:10.5151/phypro-sic100-025.
IEEE
A. N. de Moura, T. R. de Oliveira, K. D. S. Pontes, and A. I. Filho, “INFLUENCE OF ANNEALING TEMPERATURE ON THE RECRYSTALLIZATION OF THE FERRITIC STAINLESS STEEL,” International Symposium on Crystallography, p. 25, 2015, doi: 10.5151/phypro-sic100-025.
BibTeX
@inproceedings{demoura2015influence,
title = {{INFLUENCE OF ANNEALING TEMPERATURE ON THE RECRYSTALLIZATION OF THE FERRITIC STAINLESS STEEL}},
author = {de Moura, Ariane Neves and de Oliveira, Tarcísio Reis and Pontes, Kassya da Silva and Filho, André Itman},
booktitle = {International Symposium on Crystallography},
year = {2015},
pages = {25},
doi = {10.5151/phypro-sic100-025},
url = {https://doi.org/10.5151/phypro-sic100-025}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels
- ferritic stainless steel
- AISI 430 stainless steel
- niobium
- annealing temperature
- recrystallization
- drawability
- cold rolling
- hot rolling
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
de Moura, A. N., de Oliveira, T. R., Pontes, K. D. S., & Filho, A. I. (2015). INFLUENCE OF ANNEALING TEMPERATURE ON THE RECRYSTALLIZATION OF THE FERRITIC STAINLESS STEEL. International Symposium on Crystallography, 25. https://doi.org/10.5151/phypro-sic100-025
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at International Symposium on Crystallography: sign in and open the PDF from this page.
Who wrote this paper?
Ariane Neves de Moura, Tarcísio Reis de Oliveira, Kassya da Silva Pontes, André Itman Filho.
What is the DOI of this paper?
10.5151/phypro-sic100-025, permanently at https://doi.org/10.5151/phypro-sic100-025. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.