Journal article · 2019 · Open access

Influence of annealing temperature on film morphology and tribological performance of TiSiN–Ag coating

Chaoqun Dang, Minpeng Dong, Jinlong Li

Materials Research Express, 6(9), 096446 · Published 6 March 2019 · DOI 10.1088/2053-1591/ab0d2f

Open full textView at the publisherCite this paper

In brief

“Influence of annealing temperature on film morphology and tribological performance of TiSiN–Ag coating” is a 2019 journal article by Chaoqun Dang and 2 co-authors, published in Materials Research Express. OpenAlex counts 8 citations as of 17 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at CityU Scholars.

Citations
8
Most cited in
2024 (3)
Field-weighted impact
0.54
References
33
Authors
3

Abstract

TiSiN–Ag coatings were prepared by arc ion plating on Ti6Al4V at 450 °C. The as-deposited coatings were then annealed in a vacuum at 550, 650 and 750 °C for 30 min respectively to observe the Ag morphology and distribution in TiSiN coating. The microstructure evolution of the TiSiN–Ag coatings was characterized through scanning electron microscopy (SEM), revealing the segregation of Ag on the coating surface. The TiSiN–Ag coating annealed at 750 °C has denser structure, and more nanoscale to μ m-size Ag outgrowths on the coating surface. The TiSiN–Ag coating annealed at 750 °C showed the highest hardness of 18.3 ± 1.5 GPa and maximum ratios H/E and H 3 /E* 2 , with excellent mechanical properties. For the annealed TiSiN–Ag coatings, the friction coefficient is relatively low, and the TiSiN–Ag coating annealed at 750 °C has the lowest wear rate.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Dang, C., Dong, M., & Li, J. (2019). Influence of annealing temperature on film morphology and tribological performance of TiSiN–Ag coating. Materials Research Express, 6(9), 096446. https://doi.org/10.1088/2053-1591/ab0d2f

MLA 9

Dang, Chaoqun, et al. “Influence of annealing temperature on film morphology and tribological performance of TiSiN–Ag coating.” Materials Research Express, vol. 6, no. 9, 2019, p. 096446. https://doi.org/10.1088/2053-1591/ab0d2f.

Chicago

Dang, Chaoqun, Minpeng Dong, and Jinlong Li. 2019. “Influence of annealing temperature on film morphology and tribological performance of TiSiN–Ag coating.” Materials Research Express 6 (9): 096446. https://doi.org/10.1088/2053-1591/ab0d2f.

Harvard

Dang, C., Dong, M. and Li, J. (2019) ‘Influence of annealing temperature on film morphology and tribological performance of TiSiN–Ag coating’, Materials Research Express, 6(9), p. 096446. doi:10.1088/2053-1591/ab0d2f.

IEEE

C. Dang, M. Dong, and J. Li, “Influence of annealing temperature on film morphology and tribological performance of TiSiN–Ag coating,” Materials Research Express, vol. 6, no. 9, p. 096446, 2019, doi: 10.1088/2053-1591/ab0d2f.

BibTeX

@article{dang2019influence,
  title     = {{Influence of annealing temperature on film morphology and tribological performance of TiSiN–Ag coating}},
  author    = {Dang, Chaoqun and Dong, Minpeng and Li, Jinlong},
  journal   = {Materials Research Express},
  year      = {2019},
  volume    = {6},
  number    = {9},
  pages     = {096446},
  doi       = {10.1088/2053-1591/ab0d2f},
  url       = {https://doi.org/10.1088/2053-1591/ab0d2f}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201911
202022
202211
202433
202611

Its field-weighted citation impact is 0.54: it has been cited 0.54 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • annealing temperature
  • arc ion plating
  • Ti-6Al-4V
  • silver segregation
  • coating microstructure
  • hardness
  • friction coefficient
  • wear rate

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Dang, C., Dong, M., & Li, J. (2019). Influence of annealing temperature on film morphology and tribological performance of TiSiN–Ag coating. Materials Research Express, 6(9), 096446. https://doi.org/10.1088/2053-1591/ab0d2f

How many times has this paper been cited?

8 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at CityU Scholars: sign in and open the full text from this page.

Who wrote this paper?

Chaoqun Dang, Minpeng Dong, Jinlong Li.

What is the DOI of this paper?

10.1088/2053-1591/ab0d2f, permanently at https://doi.org/10.1088/2053-1591/ab0d2f. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.