Paper · 2013 · Open access
Influence of Annealing Heating Rate on Nb Ferritic Stainless Steel Microstructure and Texture
Materials science forum, 753, 217–220 · Published 26 March 2013 · DOI 10.4028/www.scientific.net/msf.753.217
In brief
“Influence of Annealing Heating Rate on Nb Ferritic Stainless Steel Microstructure and Texture” is a 2013 paper by Daniella Gomes Rodrigues and 3 co-authors, published in Materials science forum. OpenAlex counts 2 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials science forum.
- Citations
- 2
- Most cited in
- 2019 (1)
- References
- 4
- Authors
- 4
Abstract
The cold rolled band of the niobium stabilized type ASTM 430 ferritic stainless steel with 85 % thickness reduction was annealed with heating rates of 0.10, 6.8, 23.5 and 41.5 °C/s and a soaking time of 24 s. The changes in microstructure and texture were followed by interruptions in the annealing cycle at temperatures of 780, 830 and 880 °C. Annealing at the lower heating rate was more effective for the development of γ-fiber than the annealing performed with high heating rate. The increased rate of heating provided an increase in the onset recrystallization temperature, a reduction in average grain diameter and a more homogeneous distribution throughout the thickness. The specimens with higher volume fraction of the γ-fiber annealed with low heating rate showed a high average coefficient of anisotropy R =1.99.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Rodrigues, D. G., de Oliveira, T. R., Santos, D. B., & Gonzalez, B. M. (2013). Influence of Annealing Heating Rate on Nb Ferritic Stainless Steel Microstructure and Texture. Materials science forum, 753, 217–220. https://doi.org/10.4028/www.scientific.net/msf.753.217
MLA 9
Rodrigues, Daniella Gomes, et al. “Influence of Annealing Heating Rate on Nb Ferritic Stainless Steel Microstructure and Texture.” Materials science forum, vol. 753, 2013, pp. 217–220. https://doi.org/10.4028/www.scientific.net/msf.753.217.
Chicago
Rodrigues, Daniella Gomes, Tarcísio Reis de Oliveira, Dogoberto Brandão Santos, and Berenice Mendonça Gonzalez. 2013. “Influence of Annealing Heating Rate on Nb Ferritic Stainless Steel Microstructure and Texture.” Materials science forum 753: 217–220. https://doi.org/10.4028/www.scientific.net/msf.753.217.
Harvard
Rodrigues, D. G. et al. (2013) ‘Influence of Annealing Heating Rate on Nb Ferritic Stainless Steel Microstructure and Texture’, Materials science forum, 753, pp. 217–220. doi:10.4028/www.scientific.net/msf.753.217.
IEEE
D. G. Rodrigues, T. R. de Oliveira, D. B. Santos, and B. M. Gonzalez, “Influence of Annealing Heating Rate on Nb Ferritic Stainless Steel Microstructure and Texture,” Materials science forum, vol. 753, pp. 217–220, 2013, doi: 10.4028/www.scientific.net/msf.753.217.
BibTeX
@article{rodrigues2013influence,
title = {{Influence of Annealing Heating Rate on Nb Ferritic Stainless Steel Microstructure and Texture}},
author = {Rodrigues, Daniella Gomes and de Oliveira, Tarcísio Reis and Santos, Dogoberto Brandão and Gonzalez, Berenice Mendonça},
journal = {Materials science forum},
year = {2013},
volume = {753},
pages = {217--220},
doi = {10.4028/www.scientific.net/msf.753.217},
url = {https://doi.org/10.4028/www.scientific.net/msf.753.217}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels
- cold rolling
- recrystallization
- recrystallization texture
- gamma fiber
- grain size
- anisotropy
- microstructure
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Rodrigues, D. G., de Oliveira, T. R., Santos, D. B., & Gonzalez, B. M. (2013). Influence of Annealing Heating Rate on Nb Ferritic Stainless Steel Microstructure and Texture. Materials science forum, 753, 217–220. https://doi.org/10.4028/www.scientific.net/msf.753.217
How many times has this paper been cited?
2 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Materials science forum: sign in and open the full text from this page.
Who wrote this paper?
Daniella Gomes Rodrigues, Tarcísio Reis de Oliveira, Dogoberto Brandão Santos, Berenice Mendonça Gonzalez.
What is the DOI of this paper?
10.4028/www.scientific.net/msf.753.217, permanently at https://doi.org/10.4028/www.scientific.net/msf.753.217. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.