Journal article · 2017 · Open access
Increasing Fuel Cell Efficiency by Using Ultra-Low Equivalent Weight Ionomers
The Electrochemical Society Interface, 26(1), 49–53 · Published 5 April 2017 · DOI 10.1149/2.f05171if
In brief
“Increasing Fuel Cell Efficiency by Using Ultra-Low Equivalent Weight Ionomers” is a 2017 journal article by Michael Yandrasits and 3 co-authors, published in The Electrochemical Society Interface. OpenAlex counts 52 citations as of 19 November 2026. It is open access: the full text is free to read at The Electrochemical Society Interface.
- Citations
- 52
- Most cited in
- 2019 (10)
- Field-weighted impact
- 2.45
- References
- 8
- Authors
- 4
Abstract
Proton exchange membranes based on perfluorosulfonic acid (PFSA) ionomers are the industry standard for proton exchange membrane fuel cells. These ionomers offer remarkable proton conductivity and chemical stability, especially when fully hydrated with water. Performance, however, rapidly decreases as the membranes dry out, thereby requiring external humidification equipment. Because of this, there exists a need for new ionomers that can maintain high proton conductivity at low humidification levels. Perfluoro bissulfonimides have acid strengths similar to those of sulfonic acids and can be used to extend the polymer side chain with an additional protogenic group. These polymers have been designated PerfluoroSulfonImide Acid (PFIA) or PerfluoroIonene Chain Extended (PFICE) ionomers. Compared to PFSAs, these ionomers have improved conductivities under all humidity conditions, however, the benefit of these improvements are most significant under the driest conditions.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Yandrasits, M., Lindell, M. J., Schaberg, M. S., & Kurkowski, M. J. (2017). Increasing Fuel Cell Efficiency by Using Ultra-Low Equivalent Weight Ionomers. The Electrochemical Society Interface, 26(1), 49–53. https://doi.org/10.1149/2.f05171if
MLA 9
Yandrasits, Michael, et al. “Increasing Fuel Cell Efficiency by Using Ultra-Low Equivalent Weight Ionomers.” The Electrochemical Society Interface, vol. 26, no. 1, 2017, pp. 49–53. https://doi.org/10.1149/2.f05171if.
Chicago
Yandrasits, Michael, Matthew J. Lindell, Mark S. Schaberg, and Michael J. Kurkowski. 2017. “Increasing Fuel Cell Efficiency by Using Ultra-Low Equivalent Weight Ionomers.” The Electrochemical Society Interface 26 (1): 49–53. https://doi.org/10.1149/2.f05171if.
Harvard
Yandrasits, M. et al. (2017) ‘Increasing Fuel Cell Efficiency by Using Ultra-Low Equivalent Weight Ionomers’, The Electrochemical Society Interface, 26(1), pp. 49–53. doi:10.1149/2.f05171if.
IEEE
M. Yandrasits, M. J. Lindell, M. S. Schaberg, and M. J. Kurkowski, “Increasing Fuel Cell Efficiency by Using Ultra-Low Equivalent Weight Ionomers,” The Electrochemical Society Interface, vol. 26, no. 1, pp. 49–53, 2017, doi: 10.1149/2.f05171if.
BibTeX
@article{yandrasits2017increasing,
title = {{Increasing Fuel Cell Efficiency by Using Ultra-Low Equivalent Weight Ionomers}},
author = {Yandrasits, Michael and Lindell, Matthew J. and Schaberg, Mark S. and Kurkowski, Michael J.},
journal = {The Electrochemical Society Interface},
year = {2017},
volume = {26},
number = {1},
pages = {49--53},
doi = {10.1149/2.f05171if},
url = {https://doi.org/10.1149/2.f05171if}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2017 | 1 | |
| 2018 | 8 | |
| 2019 | 10 | |
| 2020 | 6 | |
| 2021 | 7 | |
| 2022 | 4 | |
| 2023 | 6 | |
| 2024 | 4 | |
| 2025 | 3 | |
| 2026 | 3 |
Its field-weighted citation impact is 2.45: it has been cited 2.45 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- proton exchange membrane fuel cells
- perfluorosulfonic acid ionomer
- proton conductivity
- membrane hydration
- equivalent weight
- fuel cell efficiency
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Yandrasits, M., Lindell, M. J., Schaberg, M. S., & Kurkowski, M. J. (2017). Increasing Fuel Cell Efficiency by Using Ultra-Low Equivalent Weight Ionomers. The Electrochemical Society Interface, 26(1), 49–53. https://doi.org/10.1149/2.f05171if
How many times has this paper been cited?
52 times, according to OpenAlex on 19 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at The Electrochemical Society Interface: sign in and open the PDF from this page.
Who wrote this paper?
Michael Yandrasits, Matthew J. Lindell, Mark S. Schaberg, Michael J. Kurkowski.
What is the DOI of this paper?
10.1149/2.f05171if, permanently at https://doi.org/10.1149/2.f05171if. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 19 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.