Journal article · 2016 · Open access

Improving crystalline quality of sputtering-deposited MoS 2 thin film by postdeposition sulfurization annealing using ( t -C 4 H 9 ) 2 S 2

Seiya Ishihara, Yusuke Hibino, Naomi Sawamoto, Kohei Suda, T. Ohashi, Kentarou Matsuura, Hideaki Machida, Masato Ishikawa, Hiroshi Sudoh, Hitoshi Wakabayashi, Atsushi Ogura

Japanese Journal of Applied Physics, 55(4S), 04EJ07 · Published 2 March 2016 · DOI 10.7567/jjap.55.04ej07

Open PDFView at the publisherCite this paper

In brief

“Improving crystalline quality of sputtering-deposited MoS 2 thin film by postdeposition sulfurization annealing using ( t -C 4 H 9 ) 2 S 2” is a 2016 journal article by Seiya Ishihara and 10 co-authors, published in Japanese Journal of Applied Physics. OpenAlex counts 40 citations as of 17 November 2026. It is open access: the full text is free to read at Japanese Journal of Applied Physics.

Citations
40
Most cited in
2018 (7)
Field-weighted impact
2.33
References
33
Authors
11

Abstract

A sputtered MoS 2 thin film is a candidate for realizing enhancement-mode MoS 2 metal–oxide–semiconductor field-effect transistors (MOSFETs). However, there are some sulfur vacancies in the film, which degrade the device performance. In this study, we performed postdeposition sulfurization annealing (PSA) on a sputtered MoS 2 thin film in order to complement sulfur vacancies, and we investigated the fundamental properties of the MoS 2 film. As a result, a high-quality crystalline 10-layer MoS 2 film with an ideal stoichiometric composition was obtained at a relatively low process temperature (500 °C). The MoS 2 film had an indirect bandgap of 1.36 eV and a high Hall mobility compared with the as-deposited sputtered MoS 2 film.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Ishihara, S., Hibino, Y., Sawamoto, N., Suda, K., Ohashi, T., Matsuura, K., Machida, H., Ishikawa, M., Sudoh, H., Wakabayashi, H., & Ogura, A. (2016). Improving crystalline quality of sputtering-deposited MoS 2 thin film by postdeposition sulfurization annealing using ( t -C 4 H 9 ) 2 S 2. Japanese Journal of Applied Physics, 55(4S), 04EJ07. https://doi.org/10.7567/jjap.55.04ej07

MLA 9

Ishihara, Seiya, et al. “Improving crystalline quality of sputtering-deposited MoS 2 thin film by postdeposition sulfurization annealing using ( t -C 4 H 9 ) 2 S 2.” Japanese Journal of Applied Physics, vol. 55, no. 4S, 2016, p. 04EJ07. https://doi.org/10.7567/jjap.55.04ej07.

Chicago

Ishihara, Seiya, Yusuke Hibino, Naomi Sawamoto, Kohei Suda, T. Ohashi, Kentarou Matsuura, Hideaki Machida, et al. 2016. “Improving crystalline quality of sputtering-deposited MoS 2 thin film by postdeposition sulfurization annealing using ( t -C 4 H 9 ) 2 S 2.” Japanese Journal of Applied Physics 55 (4S): 04EJ07. https://doi.org/10.7567/jjap.55.04ej07.

Harvard

Ishihara, S. et al. (2016) ‘Improving crystalline quality of sputtering-deposited MoS 2 thin film by postdeposition sulfurization annealing using ( t -C 4 H 9 ) 2 S 2’, Japanese Journal of Applied Physics, 55(4S), p. 04EJ07. doi:10.7567/jjap.55.04ej07.

IEEE

S. Ishihara et al., “Improving crystalline quality of sputtering-deposited MoS 2 thin film by postdeposition sulfurization annealing using ( t -C 4 H 9 ) 2 S 2,” Japanese Journal of Applied Physics, vol. 55, no. 4S, p. 04EJ07, 2016, doi: 10.7567/jjap.55.04ej07.

BibTeX

@article{ishihara2016improving,
  title     = {{Improving crystalline quality of sputtering-deposited MoS 2 thin film by postdeposition sulfurization annealing using ( t -C 4 H 9 ) 2 S 2}},
  author    = {Ishihara, Seiya and Hibino, Yusuke and Sawamoto, Naomi and Suda, Kohei and Ohashi, T. and Matsuura, Kentarou and Machida, Hideaki and Ishikawa, Masato and Sudoh, Hiroshi and Wakabayashi, Hitoshi and Ogura, Atsushi},
  journal   = {Japanese Journal of Applied Physics},
  year      = {2016},
  volume    = {55},
  number    = {4S},
  pages     = {04EJ07},
  doi       = {10.7567/jjap.55.04ej07},
  url       = {https://doi.org/10.7567/jjap.55.04ej07}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201744
201877
201977
202033
202133
202255
202344
202411
202511
202633

Its field-weighted citation impact is 2.33: it has been cited 2.33 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications

  • MoS2 thin films
  • sputter deposition
  • diethyl sulfide
  • sulfur vacancies
  • crystal quality
  • MOSFET
  • indirect band gap
  • Hall mobility

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Ishihara, S., Hibino, Y., Sawamoto, N., Suda, K., Ohashi, T., Matsuura, K., Machida, H., Ishikawa, M., Sudoh, H., Wakabayashi, H., & Ogura, A. (2016). Improving crystalline quality of sputtering-deposited MoS 2 thin film by postdeposition sulfurization annealing using ( t -C 4 H 9 ) 2 S 2. Japanese Journal of Applied Physics, 55(4S), 04EJ07. https://doi.org/10.7567/jjap.55.04ej07

How many times has this paper been cited?

40 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Japanese Journal of Applied Physics: sign in and open the PDF from this page.

Who wrote this paper?

Seiya Ishihara, Yusuke Hibino, Naomi Sawamoto, Kohei Suda, T. Ohashi, Kentarou Matsuura, Hideaki Machida, Masato Ishikawa, Hiroshi Sudoh, Hitoshi Wakabayashi, Atsushi Ogura.

What is the DOI of this paper?

10.7567/jjap.55.04ej07, permanently at https://doi.org/10.7567/jjap.55.04ej07. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.