Journal article · 2022 · Open access
Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN
Materials, 15(21), 7750 · Published 3 November 2022 · DOI 10.3390/ma15217750
In brief
“Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN” is a 2022 journal article by Yin‐Yu Chang and Kai-Chun Huang, published in Materials. OpenAlex counts 15 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials.
- Citations
- 15
- Most cited in
- 2024 (5)
- Field-weighted impact
- 1.01
- References
- 60
- Authors
- 2
Abstract
In tribological applications, the degradation of alloy nitride coatings is an issue of increasing concern. The drawbacks of monolayer hard coatings can be overcome using a multilayer coating system. In this study, single-layer TiAlNbN and multilayer TiAlNbN/AlCrN coatings with AlCrN layer addition into TiAlNbN were prepared by cathodic arc evaporation (CAE). The multilayer TiAlNbN/AlCrN showed B1 NaCl structure, and the columnar structure continued from the bottom interlayer of CrN to the top multilayers without interruption. After AlCrN addition, the TiAlNbN/AlCrN coating consisted of TiAlNbN and AlCrN multilayers with a periodic thickness of 13.2 nm. The layer thicknesses of the TiAlNbN and AlCrN were 7 nm and 6.2 nm, respectively. The template growth of the TiAlNbN and AlCrN sublayers stabilized the cubic phases. The introduction of bottom CrN and the TiAlNbN/CrN transition layers possessed com-position-gradient that improved the adhesion strength of the coatings. The hardness of the deposited TiAlNbN was 30.2 ± 1.3 GPa. The TiAlNbN/AlCrN had higher hardness of 31.7 ± 3.5 GPa and improved tribological performance (wear rate = 8.2 ± 0.6 × 10−7 mm3/Nm) than those of TiAlNbN, which were because the multilayer architecture with AlCrN addition effectively resisted abrasion wear.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Chang, Y., & Huang, K.-C. (2022). Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN. Materials, 15(21), 7750. https://doi.org/10.3390/ma15217750
MLA 9
Chang, Yin‐Yu, and Kai-Chun Huang. “Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN.” Materials, vol. 15, no. 21, 2022, p. 7750. https://doi.org/10.3390/ma15217750.
Chicago
Chang, Yin‐Yu and Kai-Chun Huang. 2022. “Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN.” Materials 15 (21): 7750. https://doi.org/10.3390/ma15217750.
Harvard
Chang, Y. and Huang, K.-C. (2022) ‘Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN’, Materials, 15(21), p. 7750. doi:10.3390/ma15217750.
IEEE
Y. Chang and K.-C. Huang, “Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN,” Materials, vol. 15, no. 21, p. 7750, 2022, doi: 10.3390/ma15217750.
BibTeX
@article{chang2022improvement,
title = {{Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN}},
author = {Chang, Yin‐Yu and Huang, Kai-Chun},
journal = {Materials},
year = {2022},
volume = {15},
number = {21},
pages = {7750},
doi = {10.3390/ma15217750},
url = {https://doi.org/10.3390/ma15217750}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2023 | 1 | |
| 2024 | 5 | |
| 2025 | 5 | |
| 2026 | 4 |
Its field-weighted citation impact is 1.01: it has been cited 1.01 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- multilayer coatings
- tribological properties
- wear resistance
- cathodic arc deposition
- rock salt structure
- compositional gradient
- coating adhesion
- hardness
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Chang, Y., & Huang, K.-C. (2022). Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN. Materials, 15(21), 7750. https://doi.org/10.3390/ma15217750
How many times has this paper been cited?
15 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Materials: sign in and open the PDF from this page.
Who wrote this paper?
Yin‐Yu Chang, Kai-Chun Huang.
What is the DOI of this paper?
10.3390/ma15217750, permanently at https://doi.org/10.3390/ma15217750. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.