Dissertation · 2014 · Open access
IMPROVEMENT OF THE FUNCTIONAL PROPERTIES OF NANOSTRUCTURED Ti-Ni SHAPE MEMORY ALLOYS BY MEANS OF THERMOMECHANICAL PROCESSING
Espace ÉTS (ETS) · Published 4 December 2014
In brief
“IMPROVEMENT OF THE FUNCTIONAL PROPERTIES OF NANOSTRUCTURED Ti-Ni SHAPE MEMORY ALLOYS BY MEANS OF THERMOMECHANICAL PROCESSING” is a 2014 dissertation by Alena Kreitcberg, published in Espace ÉTS (ETS). OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at Espace ÉTS (ETS).
- Citations
- 0
- References
- 112
- Authors
- 1
Abstract
Severe plastic deformation (SPD) is commonly used for nanostructure formation in Ti-Ni shape memory alloys (SMAs), but it increases the risk of damage during processing and, consequently, negatively affects functional fatigue resistance of these materials. The principal objective of this project is, therefore, to study the interrelations between the processing conditions, damageability during processing, microstructure and the functional properties of Ti-Ni SMAs with the aim of improving long-term functional performances of these materials by optimizing their processing conditions. \n \nFirst, microstructure and fatigue properties of Ti-Ni SMAs were studied after thermomechanical treatment (TMT) with different combinations of severe cold and warm rolling (CR and WR), as well as intermediate and post-deformation annealing (IA and PDA) technological steps. It was shown that either when WR and IA were introduced into the TMT schedule, or CR intensity was decreased, the fatigue life was improved as a consequence of less processing-induced damage and higher density of the favorable B2-austenite texture. This improvement was reached, however, at a price of a lower multi-cycle functional stability of these materials, the latter being a direct consequence of the microstructure coarsening after higher-temperature lower-intensity processing. At the end of this study, however, it was not possible to distinguish between contributions to the functional performances of Ti-Ni SMAs from different processing-related features: a) grain/subgrain size; b) texture; and c) level of rolling-induced defects. \n \nTo be capable of separating contributions to the functional properties of Ti-Ni alloys from grain/subgrain size and from texture, the theoretical crystallographic resource of recovery strain after different TMTs and, therefore, different textures, were calculated and compared with the experiment. The comparative analysis showed that the structural factors (grain/subgrain size) strongly dominate the texture contributions, and therefore, there is no real alternative to having nanocrystalline Ti-Ni alloys, if one needs to maximize the Ti-Ni alloys functional properties. Since the creation of such a microstructure requires the use of severe cold deformation techniques and neither of these techniques can be completely exempt from defects, it was deemed necessary to compare the damage tolerance of nanocrystalline Ti-Ni alloys to that of their nanosubgrained and mixed nanocrystalline/nanosubgrained counterparts. \n \nWith this objective in mind, a detailed analysis of interrelations between the level of the CR/WR-induced damage (edge microcrack size and concentration) and the fatigue life of Ti-Ni SMAs was carried out. It was shown that nanocrystalline structure provides higher tolerance to small-crack propagation than nanosubgrained or mixed nanocrystalline/nanosubgrained structures, and that low-temperature deformability of these alloys has to be improved to benefit from the property-enhancement potential of…
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kreitcberg, A. (2014). IMPROVEMENT OF THE FUNCTIONAL PROPERTIES OF NANOSTRUCTURED Ti-Ni SHAPE MEMORY ALLOYS BY MEANS OF THERMOMECHANICAL PROCESSING. Espace ÉTS (ETS). http://espace.etsmtl.ca/1415/1/KREITCBERG_Alena.pdf
MLA 9
Kreitcberg, Alena. “IMPROVEMENT OF THE FUNCTIONAL PROPERTIES OF NANOSTRUCTURED Ti-Ni SHAPE MEMORY ALLOYS BY MEANS OF THERMOMECHANICAL PROCESSING.” Espace ÉTS (ETS), 2014. http://espace.etsmtl.ca/1415/1/KREITCBERG_Alena.pdf.
Chicago
Kreitcberg, Alena. 2014. “IMPROVEMENT OF THE FUNCTIONAL PROPERTIES OF NANOSTRUCTURED Ti-Ni SHAPE MEMORY ALLOYS BY MEANS OF THERMOMECHANICAL PROCESSING.” Espace ÉTS (ETS). http://espace.etsmtl.ca/1415/1/KREITCBERG_Alena.pdf.
Harvard
Kreitcberg, A. (2014) ‘IMPROVEMENT OF THE FUNCTIONAL PROPERTIES OF NANOSTRUCTURED Ti-Ni SHAPE MEMORY ALLOYS BY MEANS OF THERMOMECHANICAL PROCESSING’, Espace ÉTS (ETS). Available at: http://espace.etsmtl.ca/1415/1/KREITCBERG_Alena.pdf.
IEEE
A. Kreitcberg, “IMPROVEMENT OF THE FUNCTIONAL PROPERTIES OF NANOSTRUCTURED Ti-Ni SHAPE MEMORY ALLOYS BY MEANS OF THERMOMECHANICAL PROCESSING,” Espace ÉTS (ETS), 2014.
BibTeX
@phdthesis{kreitcberg2014improvement,
title = {{IMPROVEMENT OF THE FUNCTIONAL PROPERTIES OF NANOSTRUCTURED Ti-Ni SHAPE MEMORY ALLOYS BY MEANS OF THERMOMECHANICAL PROCESSING}},
author = {Kreitcberg, Alena},
year = {2014},
url = {http://espace.etsmtl.ca/1415/1/KREITCBERG_Alena.pdf}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations
- TiNi shape memory alloy
- thermomechanical processing
- severe plastic deformation
- nanocrystalline structure
- fatigue resistance
- functional stability
- recovery strain
- damage tolerance
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Kreitcberg, A. (2014). IMPROVEMENT OF THE FUNCTIONAL PROPERTIES OF NANOSTRUCTURED Ti-Ni SHAPE MEMORY ALLOYS BY MEANS OF THERMOMECHANICAL PROCESSING. Espace ÉTS (ETS). http://espace.etsmtl.ca/1415/1/KREITCBERG_Alena.pdf
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Espace ÉTS (ETS): sign in and open the PDF from this page.
Who wrote this paper?
Alena Kreitcberg.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.