Journal article · 2019 · Open access
Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells
physica status solidi (a), 217(4) · Published 6 December 2019 · DOI 10.1002/pssa.201900518
In brief
“Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells” is a 2019 journal article by Anna Belen Morales‐Vilches and 8 co-authors, published in physica status solidi (a). OpenAlex counts 19 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at physica status solidi (a).
- Citations
- 19
- Most cited in
- 2021 (5)
- Field-weighted impact
- 1.08
- References
- 21
- Authors
- 9
Abstract
Silicon heterojunction (SHJ) solar cells rely on excellent surface passivation of the crystalline wafer. This article reports on the development of wet chemical processes varying the texturing and optimizations of the final clean processes for Czochralski–silicon wafers used in SHJ solar cells. Three different additives are used to modify both the pyramid size and the texture homogeneity on the wafers. As an alternative to standard Radio Corporation of America (RCA) sequence, ozonized deionized (DI) water‐based procedures are used to clean the silicon surfaces, reducing process time and the amount of chemicals to obtain the same cleaning quality. In addition, two different amorphous silicon (a‐Si:H) passivation stacks are discussed in this article demonstrating an improvement in the open‐circuit voltage, Voc, by 15 mV. Combining these wet chemistry improvements with optimized process conditions for the passivating a‐Si:H layers deposited by plasma‐enhanced chemical vapor deposition (PECVD), allows to obtain high‐efficiency devices both in small‐ and full‐area solar cells. On 6 in. full‐area solar cells (215.3 cm2 aperture area), open‐circuit voltages, fill factors, and efficiency values of 738 mV, 81.4%, and 23.2% are obtained, respectively; for 4 cm2 cell size, the best obtained values in equivalent devices are 741 mV, 80.6%, and 23.2%.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Morales‐Vilches, A. B., Wang, E., Henschel, T., Kubicki, M., Cruz, A., Janke, S., Korte, L., Schlatmann, R., & Stannowski, B. (2019). Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells. physica status solidi (a), 217(4). https://doi.org/10.1002/pssa.201900518
MLA 9
Morales‐Vilches, Anna Belen, et al. “Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells.” physica status solidi (a), vol. 217, no. 4, 2019. https://doi.org/10.1002/pssa.201900518.
Chicago
Morales‐Vilches, Anna Belen, Er‐Chien Wang, Tobias Henschel, Matthias Kubicki, Alexandros Cruz, Stefan Janke, Lars Korte, Rutger Schlatmann, and Bernd Stannowski. 2019. “Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells.” physica status solidi (a) 217 (4). https://doi.org/10.1002/pssa.201900518.
Harvard
Morales‐Vilches, A. B. et al. (2019) ‘Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells’, physica status solidi (a), 217(4). doi:10.1002/pssa.201900518.
IEEE
A. B. Morales‐Vilches et al., “Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells,” physica status solidi (a), vol. 217, no. 4, 2019, doi: 10.1002/pssa.201900518.
BibTeX
@article{moralesvilches2019improved,
title = {{Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells}},
author = {Morales‐Vilches, Anna Belen and Wang, Er‐Chien and Henschel, Tobias and Kubicki, Matthias and Cruz, Alexandros and Janke, Stefan and Korte, Lars and Schlatmann, Rutger and Stannowski, Bernd},
journal = {physica status solidi (a)},
year = {2019},
volume = {217},
number = {4},
doi = {10.1002/pssa.201900518},
url = {https://doi.org/10.1002/pssa.201900518}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2020 | 3 | |
| 2021 | 5 | |
| 2022 | 4 | |
| 2023 | 2 | |
| 2024 | 4 | |
| 2025 | 1 |
Its field-weighted citation impact is 1.08: it has been cited 1.08 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies
- silicon heterojunction solar cells
- surface passivation
- plasma-enhanced chemical vapor deposition
- Czochralski silicon wafers
- open-circuit voltage
- texture homogeneity
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Morales‐Vilches, A. B., Wang, E., Henschel, T., Kubicki, M., Cruz, A., Janke, S., Korte, L., Schlatmann, R., & Stannowski, B. (2019). Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells. physica status solidi (a), 217(4). https://doi.org/10.1002/pssa.201900518
How many times has this paper been cited?
19 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at physica status solidi (a).
Who wrote this paper?
Anna Belen Morales‐Vilches, Er‐Chien Wang, Tobias Henschel, Matthias Kubicki, Alexandros Cruz, Stefan Janke, Lars Korte, Rutger Schlatmann, Bernd Stannowski.
What is the DOI of this paper?
10.1002/pssa.201900518. The permanent link is https://doi.org/10.1002/pssa.201900518.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.