Journal article · 2014 · Open access

Improved properties of boron-doped zinc oxide films with In2O3:Sn interlayers for solar cells

Huixu Zhao, Xinliang Chen, Yang Xu, Du Jian, Bai Li-Sha, Chen Ze, Ying Zhao, Xiaodan Zhang

Acta Physica Sinica, 63(5), 056801 · Published 1 January 2014 · DOI 10.7498/aps.63.056801

Read the free full textCite this paper

In brief

“Improved properties of boron-doped zinc oxide films with In2O3:Sn interlayers for solar cells” is a 2014 journal article by Huixu Zhao and 7 co-authors, published in Acta Physica Sinica. OpenAlex counts 3 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Acta Physica Sinica.

Citations
3
Most cited in
2015 (2)
Field-weighted impact
0.32
References
29
Authors
8

Abstract

Boron-doped zinc oxide (BZO) films with a natural pyramid-textured surface grown by metal organic chemical vapor deposition (MOCVD) have large light trapping effect in thin film silicon solar cells when used as front contact electrodes. However, the surface topography of traditional BZO films is so sharp as to damage the quality of the subsequent silicon thin film materials and to reduce the photovoltaic conversion efficiency of the solar cells. In this work, an ultra-thin In2O3:Sn(ITO)film (~ 4 nm) is used as the interlayer in the sandwiched structure of the multilayer films, i.e. glass/bottom BZO layer /ITO interlayer/top BZO layer. The surface properties can be improved through modulating the thickness of the top BZO layer. Appropriate thickness of top BZO layer and ITO interlayer are helpful for obtaining the cauliflower-like surface morphology and thus the sharp structure becomes relatively gentle, but the surface morphology still keeps a pyramid feature when depositing thicker top BZO layer. The relatively gentle surface morphology could promote crystallization quality ofc-Si:H thin film materials and reduce cracks in intrinsic layer and TCO/P-Si interface defects. Finally, this new sandwiched structure of multilayer ZnO films is applied in c-Si:H p-i-n thin film solar cells. Compared with traditional BZO films, the quantum efficiency (QE) of solar cells with a sandwiched structure of ZnO increases by about 10%, and both the open-circuit voltage (Voc) and short-circuit current density (Jsc) may increase and thus improve the solar cell efficiency.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Zhao, H., Chen, X., Xu, Y., Jian, D., Li-Sha, B., Ze, C., Zhao, Y., & Zhang, X. (2014). Improved properties of boron-doped zinc oxide films with In2O3:Sn interlayers for solar cells. Acta Physica Sinica, 63(5), 056801. https://doi.org/10.7498/aps.63.056801

MLA 9

Zhao, Huixu, et al. “Improved properties of boron-doped zinc oxide films with In2O3:Sn interlayers for solar cells.” Acta Physica Sinica, vol. 63, no. 5, 2014, p. 056801. https://doi.org/10.7498/aps.63.056801.

Chicago

Zhao, Huixu, Xinliang Chen, Yang Xu, Du Jian, Bai Li-Sha, Chen Ze, Ying Zhao, and Xiaodan Zhang. 2014. “Improved properties of boron-doped zinc oxide films with In2O3:Sn interlayers for solar cells.” Acta Physica Sinica 63 (5): 056801. https://doi.org/10.7498/aps.63.056801.

Harvard

Zhao, H. et al. (2014) ‘Improved properties of boron-doped zinc oxide films with In2O3:Sn interlayers for solar cells’, Acta Physica Sinica, 63(5), p. 056801. doi:10.7498/aps.63.056801.

IEEE

H. Zhao et al., “Improved properties of boron-doped zinc oxide films with In2O3:Sn interlayers for solar cells,” Acta Physica Sinica, vol. 63, no. 5, p. 056801, 2014, doi: 10.7498/aps.63.056801.

BibTeX

@article{zhao2014improved,
  title     = {{Improved properties of boron-doped zinc oxide films with In2O3:Sn interlayers for solar cells}},
  author    = {Zhao, Huixu and Chen, Xinliang and Xu, Yang and Jian, Du and Li-Sha, Bai and Ze, Chen and Zhao, Ying and Zhang, Xiaodan},
  journal   = {Acta Physica Sinica},
  year      = {2014},
  volume    = {63},
  number    = {5},
  pages     = {056801},
  doi       = {10.7498/aps.63.056801},
  url       = {https://doi.org/10.7498/aps.63.056801}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies

  • boron-doped zinc oxide
  • thin-film silicon solar cells
  • surface morphology
  • light trapping
  • crystallization quality
  • quantum efficiency
  • open-circuit voltage
  • short-circuit current density

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Zhao, H., Chen, X., Xu, Y., Jian, D., Li-Sha, B., Ze, C., Zhao, Y., & Zhang, X. (2014). Improved properties of boron-doped zinc oxide films with In2O3:Sn interlayers for solar cells. Acta Physica Sinica, 63(5), 056801. https://doi.org/10.7498/aps.63.056801

How many times has this paper been cited?

3 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Acta Physica Sinica.

Who wrote this paper?

Huixu Zhao, Xinliang Chen, Yang Xu, Du Jian, Bai Li-Sha, Chen Ze, Ying Zhao, Xiaodan Zhang.

What is the DOI of this paper?

10.7498/aps.63.056801. The permanent link is https://doi.org/10.7498/aps.63.056801.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.