Dissertation · 2018 · Open access

Implementation of Soft Lithography for the Fabrication of Stacked Dielectric Elastomer Actuators for Soft Robotics

Mert Corbaci

RIT Scholar Works (Rochester Institute of Technology) · Published 1 January 2018

Open PDFView at the publisherCite this paper

In brief

“Implementation of Soft Lithography for the Fabrication of Stacked Dielectric Elastomer Actuators for Soft Robotics” is a 2018 dissertation by Mert Corbaci, published in RIT Scholar Works (Rochester Institute of Technology). OpenAlex counts 1 citations as of 22 November 2026. It is open access: the full text is free to read at RIT Scholar Works (Rochester Institute of Technology).

Citations
1
Most cited in
2020 (1)
References
56
Authors
1

Abstract

Advancements in software engineering have enabled the robotics industry to transition from the use of giant industrial robots to more friendly humanoid robots. Soft robotics is one of the key elements needed to advance the transition process by providing a safer way for robots to interact with the environment. Electroactive polymers (EAPs) are one of the best candidate materials for the next generation of soft robotic actuators and artificial muscles. Lightweight dielectric elastomer actuators (DEAs) provide optimal properties such as high elasticity, rapid response rates, mechanical robustness and compliance. However, for DEAs to become widely used as artificial muscles or soft actuators, there are current limitations, such as high actuation voltage requirements, control of actuation direction, and scaling, that need to be addressed.\nThis study presents a novel approach inspired by the natural skeletal muscles to overcome the drawbacks of conventional DEAs. Instead of fabricating a large DEA device, smaller sub-units can be fabricated and bundled together to form larger actuators, similar to the way myofibrils form myocytes in skeletal muscles. Soft lithography and other microfabrication techniques were utilized to allow fabrication of silicone based multilayer stacked DEA structures, composed of hundreds of micro-sized DEA units with mechanically compliant electrodes. Experiments show that free-standing multilayer DEA structures can be fabricated using existing microfabrication tools. Three fabrication approaches, using spin coating, film casting and injection molding were evaluated to improve the repeatability of the fabrication process. Multi-layer DEA fibers can be actuated in sub-kV range while maintaining actuation ratio above 5%.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Corbaci, M. (2018). Implementation of Soft Lithography for the Fabrication of Stacked Dielectric Elastomer Actuators for Soft Robotics. RIT Scholar Works (Rochester Institute of Technology). https://scholarworks.rit.edu/theses/9977

MLA 9

Corbaci, Mert. “Implementation of Soft Lithography for the Fabrication of Stacked Dielectric Elastomer Actuators for Soft Robotics.” RIT Scholar Works (Rochester Institute of Technology), 2018. https://scholarworks.rit.edu/theses/9977.

Chicago

Corbaci, Mert. 2018. “Implementation of Soft Lithography for the Fabrication of Stacked Dielectric Elastomer Actuators for Soft Robotics.” RIT Scholar Works (Rochester Institute of Technology). https://scholarworks.rit.edu/theses/9977.

Harvard

Corbaci, M. (2018) ‘Implementation of Soft Lithography for the Fabrication of Stacked Dielectric Elastomer Actuators for Soft Robotics’, RIT Scholar Works (Rochester Institute of Technology). Available at: https://scholarworks.rit.edu/theses/9977.

IEEE

M. Corbaci, “Implementation of Soft Lithography for the Fabrication of Stacked Dielectric Elastomer Actuators for Soft Robotics,” RIT Scholar Works (Rochester Institute of Technology), 2018.

BibTeX

@phdthesis{corbaci2018implementation,
  title     = {{Implementation of Soft Lithography for the Fabrication of Stacked Dielectric Elastomer Actuators for Soft Robotics}},
  author    = {Corbaci, Mert},
  year      = {2018},
  url       = {https://scholarworks.rit.edu/theses/9977}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators

  • dielectric elastomer actuators
  • soft lithography
  • soft robotics
  • electroactive polymers
  • artificial muscles
  • silicone rubber
  • spin coating
  • film casting

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Corbaci, M. (2018). Implementation of Soft Lithography for the Fabrication of Stacked Dielectric Elastomer Actuators for Soft Robotics. RIT Scholar Works (Rochester Institute of Technology). https://scholarworks.rit.edu/theses/9977

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at RIT Scholar Works (Rochester Institute of Technology): sign in and open the PDF from this page.

Who wrote this paper?

Mert Corbaci.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.