Dissertation · 2016 · Open access
Hydrodesulphurization of dibenzothiophene using carbon supported NiMoS catalysts
cIRcle (University of British Columbia) · Published 1 January 2016 · DOI 10.14288/1.0228785
In brief
“Hydrodesulphurization of dibenzothiophene using carbon supported NiMoS catalysts” is a 2016 dissertation by Majed A. Alamoudi, published in cIRcle (University of British Columbia). OpenAlex counts 3 citations as of 18 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at cIRcle (University of British Columbia).
- Citations
- 3
- Most cited in
- 2018 (1)
- References
- 35
- Authors
- 1
Abstract
Hydrodesulphurization (HDS) is the major process used to remove S from crude oil feedstocks in order to improve fuel quality and meet environmental regulations. The goal of this study was to determine if petroleum coke (petcoke), derived from Alberta oilsands, could be converted into a useful catalyst support. Hence the HDS activity and selectivity of nickel molybdenum sulfided catalysts supported on activated carbon (NiMoS/AC), petroleum coke (NiMoS/PC) and conventional alumina (NiMo/γ-Al₂O₃) have been compared using dibenzothiophene (DBT) as a model reactant. The reactions were carried out in a novel slurry-phase batch microreactor at different reaction times (30-120 min) and temperatures (588-638 K) and a fixed H2 pressure (4.8 MPa). The results showed that NiMoS/PC had higher activity towards the HDS of DBT when compared with NiMoS/AC, although the catalysts had very similar product selectivities. The highest activity for DBT HDS, corresponding to 90% DBT conversion, occurred at 638 K for the NiMoS/AC catalyst and at 623K for the NiMoS/PC catalyst. The reaction proceeded by two pathways: the direct desulphurization (DDS) reaction route and the hydrogenation (HYD) reaction route. The power law pseudo 1st-order kinetic model was applied to the HDS of DBT. The estimated kinetic parameters showed similar magnitudes for the HYD versus the DDS routes over both catalysts, whereas the DDS pathway had higher apparent activation energy compared to the HYD route for both catalysts.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Alamoudi, M. A. (2016). Hydrodesulphurization of dibenzothiophene using carbon supported NiMoS catalysts. cIRcle (University of British Columbia). https://doi.org/10.14288/1.0228785
MLA 9
Alamoudi, Majed A. “Hydrodesulphurization of dibenzothiophene using carbon supported NiMoS catalysts.” cIRcle (University of British Columbia), 2016. https://doi.org/10.14288/1.0228785.
Chicago
Alamoudi, Majed A. 2016. “Hydrodesulphurization of dibenzothiophene using carbon supported NiMoS catalysts.” cIRcle (University of British Columbia). https://doi.org/10.14288/1.0228785.
Harvard
Alamoudi, M. A. (2016) ‘Hydrodesulphurization of dibenzothiophene using carbon supported NiMoS catalysts’, cIRcle (University of British Columbia). doi:10.14288/1.0228785.
IEEE
M. A. Alamoudi, “Hydrodesulphurization of dibenzothiophene using carbon supported NiMoS catalysts,” cIRcle (University of British Columbia), 2016, doi: 10.14288/1.0228785.
BibTeX
@phdthesis{alamoudi2016hydrodesulphurization,
title = {{Hydrodesulphurization of dibenzothiophene using carbon supported NiMoS catalysts}},
author = {Alamoudi, Majed A.},
year = {2016},
doi = {10.14288/1.0228785},
url = {https://doi.org/10.14288/1.0228785}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2018 | 1 | |
| 2021 | 1 | |
| 2022 | 1 |
Topic and keywords
Physical Sciences › Chemical Engineering › Catalysis › Catalysis and Hydrodesulfurization Studies
- hydrodesulfurization
- dibenzothiophene
- activated carbon support
- alumina support
- hydrogenation pathway
- pseudo-first-order kinetics
- activation energy
Work with this paper
Most-cited papers in Chemical Engineering
- Viscoelastic Properties of PolymersJohn D. Ferry, Henry S. Myers · Journal of The Electrochemical Society · 1961 · 13,517 citations
- Chemical Reaction EngineeringOctave Levenspiel · Industrial & Engineering Chemistry Research · 1999 · 10,032 citations
- The theory of polymer dynamicsMasao Doi, Sam F Edwards · 1986 · 8,928 citations
- Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and EngineeringGeorge W. Huber, Sara Iborra, Avelino Corma · Chemical Reviews · 2006 · 7,825 citations
- Convective Transport in NanofluidsJacopo Buongiorno · ASME Journal of Heat and Mass Transfer · 2005 · 7,131 citations
Questions about this paper
How do I cite this paper in APA style?
Alamoudi, M. A. (2016). Hydrodesulphurization of dibenzothiophene using carbon supported NiMoS catalysts. cIRcle (University of British Columbia). https://doi.org/10.14288/1.0228785
How many times has this paper been cited?
3 times, according to OpenAlex on 18 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at cIRcle (University of British Columbia): sign in and open the full text from this page.
Who wrote this paper?
Majed A. Alamoudi.
What is the DOI of this paper?
10.14288/1.0228785, permanently at https://doi.org/10.14288/1.0228785. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 18 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.