Paper · 2024 · Open access

Hydro-mechanical modeling of injection-induced seismicity at the Deep Heat Mining Project of Basel, Switzerland

Auregan Boyet, Silvia De Simone, Víctor Vilarrasa

Published 13 December 2024 · DOI 10.5194/egusphere-gc11-solidearth-5

Open full textCite this paper

In brief

“Hydro-mechanical modeling of injection-induced seismicity at the Deep Heat Mining Project of Basel, Switzerland” is a 2024 paper by Auregan Boyet and 2 co-authors. OpenAlex counts 1 citations as of 21 November 2026. It is open access under a CC BY licence: the full text is free to read.

Citations
1
Most cited in
2024 (1)
Authors
3

Abstract

Fluid injection in subsurface reservoirs often induces seismicity, which is a limiting factor in the deployment of geo-energies, as it is the case for Enhanced Geothermal Systems (EGS). EGS are commonly deep granitic reservoirs subject to hydraulic stimulation in order to enhance the fracture permeability and consequently the heat production. Injection-induced seismicity occurs also after the stop of injection, and in many cases the largest earthquakes occur after the shut-in. The counterintuitive post-injection large magnitude seismicity is still not well understood and its modelling is necessary to improve the understanding of the processes triggering the seismicity. Pressure-driven processes, as pore pressure increase and poroelastic stress/strain variations, have been identified as triggers of seismicity, together with stress interactions, thermal disparities and geomechanical interactions. We design a coupled hydro-mechanical 2D model of the well-known case of post-injection induced seismicity of Basel EGS (Deep Heat Mining Project at Basel, Switzerland, 2006). We use CODE_BRIGHT, a finite element method software able to perform monolithic coupled thermo-hydro-mechanical analysis in geological media. The faults respond to a Mohr-Coulomb failure criterion with strain weakening and dilatancy, which allow to simulate fault reactivation and its aperture variation. The model is able to reproduce the pressure and stress variations, and the consequent fault reactivations through the simulations. The Basel EGS has been well documented and its characteristics are available. We are able to reproduce the spatio-temporal induced seismicity. Yet, our current numerical method takes long computational time. To speed up simulations, we simplify the model geometry by grouping faults that yield similar static stress transfer, computed with the code Coulomb3, which solves an analytical solution to compute stress changes caused by fault slip. The combination of numerical with analytical solutions is an effective way of obtaining faster computing models. By simultaneously assimilating monitoring data in real-time with an efficient computing model would enable a better understanding of the fluid-injection effects on the stability of the reservoir, and potentially the mitigation of the induced seismicity.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Boyet, A., De Simone, S., & Vilarrasa, V. (2024). Hydro-mechanical modeling of injection-induced seismicity at the Deep Heat Mining Project of Basel, Switzerland. https://doi.org/10.5194/egusphere-gc11-solidearth-5

MLA 9

Boyet, Auregan, et al. “Hydro-mechanical modeling of injection-induced seismicity at the Deep Heat Mining Project of Basel, Switzerland.” 2024. https://doi.org/10.5194/egusphere-gc11-solidearth-5.

Chicago

Boyet, Auregan, Silvia De Simone, and Víctor Vilarrasa. 2024. “Hydro-mechanical modeling of injection-induced seismicity at the Deep Heat Mining Project of Basel, Switzerland.” https://doi.org/10.5194/egusphere-gc11-solidearth-5.

Harvard

Boyet, A., De Simone, S. and Vilarrasa, V. (2024) ‘Hydro-mechanical modeling of injection-induced seismicity at the Deep Heat Mining Project of Basel, Switzerland’. doi:10.5194/egusphere-gc11-solidearth-5.

IEEE

A. Boyet, S. De Simone, and V. Vilarrasa, “Hydro-mechanical modeling of injection-induced seismicity at the Deep Heat Mining Project of Basel, Switzerland,” 2024, doi: 10.5194/egusphere-gc11-solidearth-5.

BibTeX

@article{boyet2024hydro,
  title     = {{Hydro-mechanical modeling of injection-induced seismicity at the Deep Heat Mining Project of Basel, Switzerland}},
  author    = {Boyet, Auregan and De Simone, Silvia and Vilarrasa, Víctor},
  year      = {2024},
  doi       = {10.5194/egusphere-gc11-solidearth-5},
  url       = {https://doi.org/10.5194/egusphere-gc11-solidearth-5}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Energy › Fuel Technology › Hydraulic Fracturing and Reservoir Analysis

  • injection-induced seismicity
  • enhanced geothermal systems
  • hydro-mechanical coupling
  • fault reactivation
  • pore pressure
  • poroelasticity
  • CODE_BRIGHT
  • stress transfer

Work with this paper

Most-cited papers in Energy

All highly cited Energy papers

Questions about this paper

How do I cite this paper in APA style?

Boyet, A., De Simone, S., & Vilarrasa, V. (2024). Hydro-mechanical modeling of injection-induced seismicity at the Deep Heat Mining Project of Basel, Switzerland. https://doi.org/10.5194/egusphere-gc11-solidearth-5

How many times has this paper been cited?

1 times, according to OpenAlex on 21 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: sign in and open the full text from this page.

Who wrote this paper?

Auregan Boyet, Silvia De Simone, Víctor Vilarrasa.

What is the DOI of this paper?

10.5194/egusphere-gc11-solidearth-5, permanently at https://doi.org/10.5194/egusphere-gc11-solidearth-5. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 21 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.