Journal article · 2008 · Open access

High-rate deposition of microcrystalline silicon p-i-n solar cells in the high pressure depletion regime

Arno H. M. Smets, Takuya Matsui, Michio Kondo

Journal of Applied Physics, 104(3) · Published 1 August 2008 · DOI 10.1063/1.2961334

Free PDFView at the publisherCite this paper

In brief

“High-rate deposition of microcrystalline silicon p-i-n solar cells in the high pressure depletion regime” is a 2008 journal article by Arno H. M. Smets and 2 co-authors, published in Journal of Applied Physics. OpenAlex counts 108 citations as of 16 November 2026. It is open access: the full text is free to read at Journal of Applied Physics.

Citations
108
Most cited in
2015 (10)
Field-weighted impact
9.58
References
68
Authors
3

Abstract

Hydrogenated microcrystalline silicon films (μc-Si:H) deposited at high deposition rates (∼2 nm/s) by means of the very-high-frequency (VHF) deposition technique in the high pressure depletion regime have been integrated into single junction p-i-n solar cells. It is demonstrated that μc-Si:H solar cells can be optimized using a twofold approach. First the bulk properties, deposited under steady-state plasma conditions, are optimized by monitoring the presence of crystalline grain boundaries in μc-Si:H. These hydrogenated crystalline grain boundaries can easily be detected via the crystalline surface hydrides contribution to the narrow high stretching modes by infrared transmission spectroscopy. The crystalline grain boundaries suffer from postdeposition oxidation which results in a reduced red response of the solar cell. The absence of these crystalline surfaces in an as-deposited μc-Si:H matrix reflects the device grade microcrystalline bulk material. Second, the prevention of silane backdiffusion from the background during the initial growth is a necessity to deposit a uniform μc-Si:H phase over the entire film thickness. The initial growth is optimized while preserving the optimized bulk properties deposited under steady-state conditions, using initial profiling of plasma parameters such as the silane flow and the VHF power density. Solar cell devices with efficiency of 8.0% at a μc-Si:H deposition rate of 2.0 nm/s are obtained using the presented approach.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Smets, A. H. M., Matsui, T., & Kondo, M. (2008). High-rate deposition of microcrystalline silicon p-i-n solar cells in the high pressure depletion regime. Journal of Applied Physics, 104(3). https://doi.org/10.1063/1.2961334

MLA 9

Smets, Arno H. M., et al. “High-rate deposition of microcrystalline silicon p-i-n solar cells in the high pressure depletion regime.” Journal of Applied Physics, vol. 104, no. 3, 2008. https://doi.org/10.1063/1.2961334.

Chicago

Smets, Arno H. M., Takuya Matsui, and Michio Kondo. 2008. “High-rate deposition of microcrystalline silicon p-i-n solar cells in the high pressure depletion regime.” Journal of Applied Physics 104 (3). https://doi.org/10.1063/1.2961334.

Harvard

Smets, A. H. M., Matsui, T. and Kondo, M. (2008) ‘High-rate deposition of microcrystalline silicon p-i-n solar cells in the high pressure depletion regime’, Journal of Applied Physics, 104(3). doi:10.1063/1.2961334.

IEEE

A. H. M. Smets, T. Matsui, and M. Kondo, “High-rate deposition of microcrystalline silicon p-i-n solar cells in the high pressure depletion regime,” Journal of Applied Physics, vol. 104, no. 3, 2008, doi: 10.1063/1.2961334.

BibTeX

@article{smets2008high,
  title     = {{High-rate deposition of microcrystalline silicon p-i-n solar cells in the high pressure depletion regime}},
  author    = {Smets, Arno H. M. and Matsui, Takuya and Kondo, Michio},
  journal   = {Journal of Applied Physics},
  year      = {2008},
  volume    = {104},
  number    = {3},
  doi       = {10.1063/1.2961334},
  url       = {https://doi.org/10.1063/1.2961334}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
20151010
201644
201733
201855
201933
202033
202133
202233
202411
202533

Its field-weighted citation impact is 9.58: it has been cited 9.58 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies

  • microcrystalline silicon
  • hydrogenated amorphous silicon
  • p-i-n solar cells
  • high deposition rate
  • surface hydrides
  • solar cell efficiency

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Smets, A. H. M., Matsui, T., & Kondo, M. (2008). High-rate deposition of microcrystalline silicon p-i-n solar cells in the high pressure depletion regime. Journal of Applied Physics, 104(3). https://doi.org/10.1063/1.2961334

How many times has this paper been cited?

108 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Journal of Applied Physics.

Who wrote this paper?

Arno H. M. Smets, Takuya Matsui, Michio Kondo.

What is the DOI of this paper?

10.1063/1.2961334. The permanent link is https://doi.org/10.1063/1.2961334.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.