Journal article · 2000 · Open access
High-Rate Deposition of Amorphous SiC Films by Atmospheric Pressure Plasma Chemical Vapor Deposition. (1st Report). Examination of Deposition Rate and Film Structure.
Journal of the Japan Society for Precision Engineering, 66(6), 907–911 · Published 1 January 2000 · DOI 10.2493/jjspe.66.907
In brief
“High-Rate Deposition of Amorphous SiC Films by Atmospheric Pressure Plasma Chemical Vapor Deposition. (1st Report). Examination of Deposition Rate and Film Structure.” is a 2000 journal article by Yuzo Mori and 3 co-authors, published in Journal of the Japan Society for Precision Engineering. OpenAlex counts 1 citations as of 16 November 2026. It is open access: the full text is free to read at Journal of the Japan Society for Precision Engineering.
- Citations
- 1
- Authors
- 4
Abstract
Using atmospheric pressure plasma CVD (chemical vapor deposition) technique, hydrogenated amorphous Si1-xCx (a-Si1-xCx:H) films were deposited with extremely high deposition rate. The films were prepared on Si(001) wafers in atmospheric pressure VHF (very high frequency) plasma of gas mixtures containing He, H2, SiH4 and CH4. Film properties (structure, density and composition of a-Si1-xCx:H) were studied as a function of CH4 concentration by TEM (transmission electron microscopy), AES (Auger electron spectroscopy) and IR (infrared) absorption spectroscopy. Relation between IR absorption spectra and chemical resistance of the films to 15% KOH solution was also investigated. The maximum deposition rate was 50nm/s, which was more than 10 times faster than that achieved by the conventional plasma CVD technique. It was found that CH4 molecules contributed to the film growth when SiH4 was co-existed with SiH4 to CH4 concentration ratio of 1/10. In this case, C to Si composition ratio in the film was 2 (a-Si0.33C0.67:H). The density of a-Si1-xCx:H film was about .1.5g/cm3 being less than half of the crystalline value of SiC. The a-Si0.33C0.67:H film was not etched by KOH solution, which was supported by IR analysis of the Si-C stretching vibration mode.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Mori, Y., Kakiuchi, H., Yoshii, K., & Yasutake, K. (2000). High-Rate Deposition of Amorphous SiC Films by Atmospheric Pressure Plasma Chemical Vapor Deposition. (1st Report). Examination of Deposition Rate and Film Structure. Journal of the Japan Society for Precision Engineering, 66(6), 907–911. https://doi.org/10.2493/jjspe.66.907
MLA 9
Mori, Yuzo, et al. “High-Rate Deposition of Amorphous SiC Films by Atmospheric Pressure Plasma Chemical Vapor Deposition. (1st Report). Examination of Deposition Rate and Film Structure.” Journal of the Japan Society for Precision Engineering, vol. 66, no. 6, 2000, pp. 907–911. https://doi.org/10.2493/jjspe.66.907.
Chicago
Mori, Yuzo, Hiroaki Kakiuchi, Kumayasu Yoshii, and Kiyoshi Yasutake. 2000. “High-Rate Deposition of Amorphous SiC Films by Atmospheric Pressure Plasma Chemical Vapor Deposition. (1st Report). Examination of Deposition Rate and Film Structure.” Journal of the Japan Society for Precision Engineering 66 (6): 907–911. https://doi.org/10.2493/jjspe.66.907.
Harvard
Mori, Y. et al. (2000) ‘High-Rate Deposition of Amorphous SiC Films by Atmospheric Pressure Plasma Chemical Vapor Deposition. (1st Report). Examination of Deposition Rate and Film Structure.’, Journal of the Japan Society for Precision Engineering, 66(6), pp. 907–911. doi:10.2493/jjspe.66.907.
IEEE
Y. Mori, H. Kakiuchi, K. Yoshii, and K. Yasutake, “High-Rate Deposition of Amorphous SiC Films by Atmospheric Pressure Plasma Chemical Vapor Deposition. (1st Report). Examination of Deposition Rate and Film Structure.,” Journal of the Japan Society for Precision Engineering, vol. 66, no. 6, pp. 907–911, 2000, doi: 10.2493/jjspe.66.907.
BibTeX
@article{mori2000high,
title = {{High-Rate Deposition of Amorphous SiC Films by Atmospheric Pressure Plasma Chemical Vapor Deposition. (1st Report). Examination of Deposition Rate and Film Structure.}},
author = {Mori, Yuzo and Kakiuchi, Hiroaki and Yoshii, Kumayasu and Yasutake, Kiyoshi},
journal = {Journal of the Japan Society for Precision Engineering},
year = {2000},
volume = {66},
number = {6},
pages = {907--911},
doi = {10.2493/jjspe.66.907},
url = {https://doi.org/10.2493/jjspe.66.907}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- amorphous silicon carbide
- very high frequency plasma
- high deposition rate
- methane concentration
- silane
- film density
- film composition
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Mori, Y., Kakiuchi, H., Yoshii, K., & Yasutake, K. (2000). High-Rate Deposition of Amorphous SiC Films by Atmospheric Pressure Plasma Chemical Vapor Deposition. (1st Report). Examination of Deposition Rate and Film Structure. Journal of the Japan Society for Precision Engineering, 66(6), 907–911. https://doi.org/10.2493/jjspe.66.907
How many times has this paper been cited?
1 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Journal of the Japan Society for Precision Engineering.
Who wrote this paper?
Yuzo Mori, Hiroaki Kakiuchi, Kumayasu Yoshii, Kiyoshi Yasutake.
What is the DOI of this paper?
10.2493/jjspe.66.907. The permanent link is https://doi.org/10.2493/jjspe.66.907.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.