Journal article · 2017 · Open access

High-mobility and low-carrier-density sputtered MoS 2 film formed by introducing residual sulfur during low-temperature in 3%-H 2 annealing for three-dimensional ICs

Jun’ichi Shimizu, T. Ohashi, Kentaro Matsuura, Iriya Muneta, Kuniyuki Kakushima, Kazuo Tsutsui, Hitoshi Wakabayashi

Japanese Journal of Applied Physics, 56(4S), 04CP06 · Published 13 March 2017 · DOI 10.7567/jjap.56.04cp06

Open PDFView at the publisherCite this paper

In brief

“High-mobility and low-carrier-density sputtered MoS 2 film formed by introducing residual sulfur during low-temperature in 3%-H 2 annealing for three-dimensional ICs” is a 2017 journal article by Jun’ichi Shimizu and 6 co-authors, published in Japanese Journal of Applied Physics. OpenAlex counts 19 citations as of 17 November 2026. It is open access: the full text is free to read at Japanese Journal of Applied Physics.

Citations
19
Most cited in
2018 (7)
Field-weighted impact
1.59
References
32
Authors
7

Abstract

We investigate the low-temperature formation of MoS 2 films by radio frequency (RF) sputtering. This work is focused on reducing the number of sulfur defects and the improving electrical characteristics of sputtered MoS 2 films by low-temperature annealing in various atmospheres. 10 nm MoS 2 films were synthesized by the RF sputtering at 300 °C and followed by annealing in nitrogen or forming gas (FG: 3% hydrogen in N 2 ) at 200–400 °C. As a result, the compensation for sulfur defects in FG anneal process using residual sulfur gave better results that in N 2 annealing. Eventually, a high Hall-effect mobility of 36 cm 2 V −1 s −1 and a low carrier density of 10 14 cm −3 were achieved.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Shimizu, J., Ohashi, T., Matsuura, K., Muneta, I., Kakushima, K., Tsutsui, K., & Wakabayashi, H. (2017). High-mobility and low-carrier-density sputtered MoS 2 film formed by introducing residual sulfur during low-temperature in 3%-H 2 annealing for three-dimensional ICs. Japanese Journal of Applied Physics, 56(4S), 04CP06. https://doi.org/10.7567/jjap.56.04cp06

MLA 9

Shimizu, Jun’ichi, et al. “High-mobility and low-carrier-density sputtered MoS 2 film formed by introducing residual sulfur during low-temperature in 3%-H 2 annealing for three-dimensional ICs.” Japanese Journal of Applied Physics, vol. 56, no. 4S, 2017, p. 04CP06. https://doi.org/10.7567/jjap.56.04cp06.

Chicago

Shimizu, Jun’ichi, T. Ohashi, Kentaro Matsuura, Iriya Muneta, Kuniyuki Kakushima, Kazuo Tsutsui, and Hitoshi Wakabayashi. 2017. “High-mobility and low-carrier-density sputtered MoS 2 film formed by introducing residual sulfur during low-temperature in 3%-H 2 annealing for three-dimensional ICs.” Japanese Journal of Applied Physics 56 (4S): 04CP06. https://doi.org/10.7567/jjap.56.04cp06.

Harvard

Shimizu, J. et al. (2017) ‘High-mobility and low-carrier-density sputtered MoS 2 film formed by introducing residual sulfur during low-temperature in 3%-H 2 annealing for three-dimensional ICs’, Japanese Journal of Applied Physics, 56(4S), p. 04CP06. doi:10.7567/jjap.56.04cp06.

IEEE

J. Shimizu et al., “High-mobility and low-carrier-density sputtered MoS 2 film formed by introducing residual sulfur during low-temperature in 3%-H 2 annealing for three-dimensional ICs,” Japanese Journal of Applied Physics, vol. 56, no. 4S, p. 04CP06, 2017, doi: 10.7567/jjap.56.04cp06.

BibTeX

@article{shimizu2017high,
  title     = {{High-mobility and low-carrier-density sputtered MoS 2 film formed by introducing residual sulfur during low-temperature in 3\%-H 2 annealing for three-dimensional ICs}},
  author    = {Shimizu, Jun’ichi and Ohashi, T. and Matsuura, Kentaro and Muneta, Iriya and Kakushima, Kuniyuki and Tsutsui, Kazuo and Wakabayashi, Hitoshi},
  journal   = {Japanese Journal of Applied Physics},
  year      = {2017},
  volume    = {56},
  number    = {4S},
  pages     = {04CP06},
  doi       = {10.7567/jjap.56.04cp06},
  url       = {https://doi.org/10.7567/jjap.56.04cp06}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201711
201877
201944
202033
202111
202322
202611

Its field-weighted citation impact is 1.59: it has been cited 1.59 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications

  • MoS2 thin films
  • RF sputtering
  • low-temperature annealing
  • residual sulfur
  • forming gas annealing
  • hydrogen annealing
  • carrier mobility
  • carrier concentration

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Shimizu, J., Ohashi, T., Matsuura, K., Muneta, I., Kakushima, K., Tsutsui, K., & Wakabayashi, H. (2017). High-mobility and low-carrier-density sputtered MoS 2 film formed by introducing residual sulfur during low-temperature in 3%-H 2 annealing for three-dimensional ICs. Japanese Journal of Applied Physics, 56(4S), 04CP06. https://doi.org/10.7567/jjap.56.04cp06

How many times has this paper been cited?

19 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Japanese Journal of Applied Physics: sign in and open the PDF from this page.

Who wrote this paper?

Jun’ichi Shimizu, T. Ohashi, Kentaro Matsuura, Iriya Muneta, Kuniyuki Kakushima, Kazuo Tsutsui, Hitoshi Wakabayashi.

What is the DOI of this paper?

10.7567/jjap.56.04cp06, permanently at https://doi.org/10.7567/jjap.56.04cp06. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.