Journal article · 2025 · Open access
Hierarchical cubic lattice structures with bending- and stretching-dominated cellular designs for enhanced buckling resistance
International Journal of Lightweight Materials and Manufacture, 8(3), 310–320 · Published 10 February 2025 · DOI 10.1016/j.ijlmm.2025.02.002
In brief
“Hierarchical cubic lattice structures with bending- and stretching-dominated cellular designs for enhanced buckling resistance” is a 2025 journal article by Asha Viswanath and 4 co-authors, published in International Journal of Lightweight Materials and Manufacture. OpenAlex counts 17 citations as of 22 November 2026, which puts it in the top 3% of works published in 2025 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at International Journal of Lightweight Materials and Manufacture.
- Citations
- 17
- Most cited in
- 2025 (12)
- Field-weighted impact
- 3.93
- References
- 63
- Authors
- 5
Abstract
Buckling is a common failure mode in low-density strut lattices, limiting their mechanical strength and stability. This work presents a novel methodology to design and manufacture lightweight, buckling-resistant strut-based lattice structures by reinforcing buckling-prone members with hierarchical lattice unit cells—either stretching- or bending-dominated—without changing the strut lattice's relative density. Four types of lattice unit cells were examined: plate, honeycomb, strut, and TPMS solids and sheets. These were tested on single-cell cubic lattice columns with square cross-sectional struts. The resulting hierarchical structures were additively manufactured and experimentally evaluated, demonstrating significantly enhanced buckling performance. Design for additive manufacturing principles were applied, and structures with stretching and bending-dominated unit cells achieved higher critical buckling loads, with the square honeycomb cell lattice showing the highest improvement at 179 % over the baseline. This approach broadens opportunities for enhancing low-density strut lattices and developing novel buckling-resistant designs.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Viswanath, A., Khalil, M., Khan, M. K. A., Cantwell, W., & Khan, K. A. (2025). Hierarchical cubic lattice structures with bending- and stretching-dominated cellular designs for enhanced buckling resistance. International Journal of Lightweight Materials and Manufacture, 8(3), 310–320. https://doi.org/10.1016/j.ijlmm.2025.02.002
MLA 9
Viswanath, Asha, et al. “Hierarchical cubic lattice structures with bending- and stretching-dominated cellular designs for enhanced buckling resistance.” International Journal of Lightweight Materials and Manufacture, vol. 8, no. 3, 2025, pp. 310–320. https://doi.org/10.1016/j.ijlmm.2025.02.002.
Chicago
Viswanath, Asha, Mohamad Khalil, Muhammad Khizer Ali Khan, W.J. Cantwell, and Kamran Ahmed Khan. 2025. “Hierarchical cubic lattice structures with bending- and stretching-dominated cellular designs for enhanced buckling resistance.” International Journal of Lightweight Materials and Manufacture 8 (3): 310–320. https://doi.org/10.1016/j.ijlmm.2025.02.002.
Harvard
Viswanath, A. et al. (2025) ‘Hierarchical cubic lattice structures with bending- and stretching-dominated cellular designs for enhanced buckling resistance’, International Journal of Lightweight Materials and Manufacture, 8(3), pp. 310–320. doi:10.1016/j.ijlmm.2025.02.002.
IEEE
A. Viswanath, M. Khalil, M. K. A. Khan, W. Cantwell, and K. A. Khan, “Hierarchical cubic lattice structures with bending- and stretching-dominated cellular designs for enhanced buckling resistance,” International Journal of Lightweight Materials and Manufacture, vol. 8, no. 3, pp. 310–320, 2025, doi: 10.1016/j.ijlmm.2025.02.002.
BibTeX
@article{viswanath2025hierarchical,
title = {{Hierarchical cubic lattice structures with bending- and stretching-dominated cellular designs for enhanced buckling resistance}},
author = {Viswanath, Asha and Khalil, Mohamad and Khan, Muhammad Khizer Ali and Cantwell, W.J. and Khan, Kamran Ahmed},
journal = {International Journal of Lightweight Materials and Manufacture},
year = {2025},
volume = {8},
number = {3},
pages = {310--320},
doi = {10.1016/j.ijlmm.2025.02.002},
url = {https://doi.org/10.1016/j.ijlmm.2025.02.002}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
- buckling resistance
- critical buckling load
- design for additive manufacturing
- lightweight lattice structures
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Viswanath, A., Khalil, M., Khan, M. K. A., Cantwell, W., & Khan, K. A. (2025). Hierarchical cubic lattice structures with bending- and stretching-dominated cellular designs for enhanced buckling resistance. International Journal of Lightweight Materials and Manufacture, 8(3), 310–320. https://doi.org/10.1016/j.ijlmm.2025.02.002
How many times has this paper been cited?
17 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at International Journal of Lightweight Materials and Manufacture: sign in and open the full text from this page.
Who wrote this paper?
Asha Viswanath, Mohamad Khalil, Muhammad Khizer Ali Khan, W.J. Cantwell, Kamran Ahmed Khan.
What is the DOI of this paper?
10.1016/j.ijlmm.2025.02.002, permanently at https://doi.org/10.1016/j.ijlmm.2025.02.002. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.