Journal article · 2010 · Open access

$\hbox{CrN}_{\rm x}$ Films Prepared by DC Magnetron Sputtering and High-Power Pulsed Magnetron Sputtering: A Comparative Study

Grzegorz Greczyński, J. Jensen, Lars Hultman

IEEE Transactions on Plasma Science, 38(11), 3046–3056 · Published 29 September 2010 · DOI 10.1109/tps.2010.2071885

Open full textView at the publisherCite this paper

In brief

“$\hbox{CrN}_{\rm x}$ Films Prepared by DC Magnetron Sputtering and High-Power Pulsed Magnetron Sputtering: A Comparative Study” is a 2010 journal article by Grzegorz Greczyński and 2 co-authors, published in IEEE Transactions on Plasma Science. OpenAlex counts 102 citations as of 19 November 2026. It is open access: the full text is free to read at DiVA (Digitala Vetenskapliga Arkivet).

Citations
102
Most cited in
2017 (13)
Field-weighted impact
2.85
References
42
Authors
3

Abstract

CrNx(0 ≤ x ≤ 0.91) films synthesized using high-power pulsed magnetron sputtering, also known as high-power impulse magnetron sputtering (HiPIMS), have been compared with those made by conventional direct-current (dc) magnetron sputtering (DCMS) operated at the same average power. The HiPIMS deposition rate relative to the DCMS rate was found to decrease linearly with increasing emission strength from the Cr ions relative to Cr neutrals, in agreement with the predictions of the target-pathway model. The low deposition rate in HiPIMS is thus a direct consequence of the high ionization level (~56%) of the target material and effective capturing of Cr ions by the cathode potential. Although the HiPIMS deposition rate did not exceed 40% of the DCMS rate, the drop in the relative deposition rate upon increasing the N2-to-Ar flow ratio, fN2/Ar, was found to be similar for both sputtering techniques. Films prepared by HiPIMS contained similar amounts of atomic nitrogen as the dc-sputtered samples grown at the same fN2/Arindicating that the nitride formation at the substrate takes place mostly during the time period of the high-power pulses, and the N2 uptake between the pulses is negligible. The microstructure evolution in the two types of CrNxfilms, however, differed clearly from each other. A combination of a high substrate bias and a high flux of doubly charged Cr ions present during the HiPIMS discharge led to a disruption of the grain growth and renucleation, which resulted in column-free films with nanosized grains not observed in the conventional DCMS-based process. The comparison of nanoindentation hardness as a function of fN2/Arrevealed superior properties of HiPIMS-sputtered films in the entire range of gas compositions.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Greczyński, G., Jensen, J., & Hultman, L. (2010). $\hbox{CrN}_{\rm x}$ Films Prepared by DC Magnetron Sputtering and High-Power Pulsed Magnetron Sputtering: A Comparative Study. IEEE Transactions on Plasma Science, 38(11), 3046–3056. https://doi.org/10.1109/tps.2010.2071885

MLA 9

Greczyński, Grzegorz, et al. “$\hbox{CrN}_{\rm x}$ Films Prepared by DC Magnetron Sputtering and High-Power Pulsed Magnetron Sputtering: A Comparative Study.” IEEE Transactions on Plasma Science, vol. 38, no. 11, 2010, pp. 3046–3056. https://doi.org/10.1109/tps.2010.2071885.

Chicago

Greczyński, Grzegorz, J. Jensen, and Lars Hultman. 2010. “$\hbox{CrN}_{\rm x}$ Films Prepared by DC Magnetron Sputtering and High-Power Pulsed Magnetron Sputtering: A Comparative Study.” IEEE Transactions on Plasma Science 38 (11): 3046–3056. https://doi.org/10.1109/tps.2010.2071885.

Harvard

Greczyński, G., Jensen, J. and Hultman, L. (2010) ‘$\hbox{CrN}_{\rm x}$ Films Prepared by DC Magnetron Sputtering and High-Power Pulsed Magnetron Sputtering: A Comparative Study’, IEEE Transactions on Plasma Science, 38(11), pp. 3046–3056. doi:10.1109/tps.2010.2071885.

IEEE

G. Greczyński, J. Jensen, and L. Hultman, “$\hbox{CrN}_{\rm x}$ Films Prepared by DC Magnetron Sputtering and High-Power Pulsed Magnetron Sputtering: A Comparative Study,” IEEE Transactions on Plasma Science, vol. 38, no. 11, pp. 3046–3056, 2010, doi: 10.1109/tps.2010.2071885.

BibTeX

@article{greczynski2010hbox,
  title     = {{\$\hbox{CrN}\_{\rm x}\$ Films Prepared by DC Magnetron Sputtering and High-Power Pulsed Magnetron Sputtering: A Comparative Study}},
  author    = {Greczyński, Grzegorz and Jensen, J. and Hultman, Lars},
  journal   = {IEEE Transactions on Plasma Science},
  year      = {2010},
  volume    = {38},
  number    = {11},
  pages     = {3046--3056},
  doi       = {10.1109/tps.2010.2071885},
  url       = {https://doi.org/10.1109/tps.2010.2071885}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
20171313
201877
20191212
20201111
202177
202299
202355
202422
202566
202666

Its field-weighted citation impact is 2.85: it has been cited 2.85 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • chromium nitride films
  • high power impulse magnetron sputtering
  • DC magnetron sputtering
  • deposition rate
  • degree of ionization
  • atomic nitrogen
  • microstructure evolution
  • grain growth

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Greczyński, G., Jensen, J., & Hultman, L. (2010). $\hbox{CrN}_{\rm x}$ Films Prepared by DC Magnetron Sputtering and High-Power Pulsed Magnetron Sputtering: A Comparative Study. IEEE Transactions on Plasma Science, 38(11), 3046–3056. https://doi.org/10.1109/tps.2010.2071885

How many times has this paper been cited?

102 times, according to OpenAlex on 19 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at DiVA (Digitala Vetenskapliga Arkivet): sign in and open the full text from this page.

Who wrote this paper?

Grzegorz Greczyński, J. Jensen, Lars Hultman.

What is the DOI of this paper?

10.1109/tps.2010.2071885, permanently at https://doi.org/10.1109/tps.2010.2071885. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 19 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.