Journal article · 2022 · Open access

Hardware Design of Low Cost Myoelectric Controlled Prosthetic Hand For Engineering Laboratory

Mehmet Serdar Çelik, Cengiz Tepe, İlyas Eminoğlu

Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 12(2), 715–725 · Published 1 June 2022 · DOI 10.21597/jist.1082384

Open PDFView at the publisherCite this paper

In brief

“Hardware Design of Low Cost Myoelectric Controlled Prosthetic Hand For Engineering Laboratory” is a 2022 journal article by Mehmet Serdar Çelik and 2 co-authors, published in Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi. OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi.

Citations
0
References
20
Authors
3

Abstract

This study presents a low cost, two-channel, on-off type, constant speed myo-electric controlled prosthetic hand project as an educational tool for Biomedical/Control/Mechatronic Engineering. Surface Electromyogram (sEMG) signals were recorded from the muscles of flexor carpi ulnaris and extensor digitorium on the forearm. Signal conditioning of these signals is performed in the analog stages of the system, before passing it on to a microcontroller for further filtering and implementation of control. The control logic is simplified to represent the muscles as being active or inactive, resulting in a very simple on/off control based on the two signals. The on/off control signals are used to drive a myo-electric controlled prosthetic hand-powered by a hobby RC servo motor. A printed circuit board has been designed for the analog stages of the system, and a simple Arduino Microcontroller is used for the digital stages. Other commercial off-the-shelf components were used to keep the cost of the hardware and the software components as low as possible. This project was used as a teaching aid for the final year undergraduate students to demonstrate the use of simple myo-electric signal processing and control techniques.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Çelik, M. S., Tepe, C., & Eminoğlu, İ. (2022). Hardware Design of Low Cost Myoelectric Controlled Prosthetic Hand For Engineering Laboratory. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 12(2), 715–725. https://doi.org/10.21597/jist.1082384

MLA 9

Çelik, Mehmet Serdar, et al. “Hardware Design of Low Cost Myoelectric Controlled Prosthetic Hand For Engineering Laboratory.” Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol. 12, no. 2, 2022, pp. 715–725. https://doi.org/10.21597/jist.1082384.

Chicago

Çelik, Mehmet Serdar, Cengiz Tepe, and İlyas Eminoğlu. 2022. “Hardware Design of Low Cost Myoelectric Controlled Prosthetic Hand For Engineering Laboratory.” Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi 12 (2): 715–725. https://doi.org/10.21597/jist.1082384.

Harvard

Çelik, M. S., Tepe, C. and Eminoğlu, İ. (2022) ‘Hardware Design of Low Cost Myoelectric Controlled Prosthetic Hand For Engineering Laboratory’, Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 12(2), pp. 715–725. doi:10.21597/jist.1082384.

IEEE

M. S. Çelik, C. Tepe, and İ. Eminoğlu, “Hardware Design of Low Cost Myoelectric Controlled Prosthetic Hand For Engineering Laboratory,” Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol. 12, no. 2, pp. 715–725, 2022, doi: 10.21597/jist.1082384.

BibTeX

@article{celik2022hardware,
  title     = {{Hardware Design of Low Cost Myoelectric Controlled Prosthetic Hand For Engineering Laboratory}},
  author    = {Çelik, Mehmet Serdar and Tepe, Cengiz and Eminoğlu, İlyas},
  journal   = {Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi},
  year      = {2022},
  volume    = {12},
  number    = {2},
  pages     = {715--725},
  doi       = {10.21597/jist.1082384},
  url       = {https://doi.org/10.21597/jist.1082384}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Muscle activation and electromyography studies

  • myoelectric prosthetic hand
  • surface electromyography
  • low-cost hardware design
  • on-off control
  • Arduino
  • servo motor actuation
  • flexor carpi ulnaris
  • signal conditioning

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Çelik, M. S., Tepe, C., & Eminoğlu, İ. (2022). Hardware Design of Low Cost Myoelectric Controlled Prosthetic Hand For Engineering Laboratory. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 12(2), 715–725. https://doi.org/10.21597/jist.1082384

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi: sign in and open the PDF from this page.

Who wrote this paper?

Mehmet Serdar Çelik, Cengiz Tepe, İlyas Eminoğlu.

What is the DOI of this paper?

10.21597/jist.1082384, permanently at https://doi.org/10.21597/jist.1082384. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.