Dissertation · 2017 · Open access

Full scale testing of precast beam to column connection using billet connector and beam half joint subjected to reversible loading / Wan Norhasiah Wan Bidin

Wan Norhasiah, Wan Bidin

University of Malaya Students Repository · Published 1 January 2017

Open PDFCite this paper

In brief

“Full scale testing of precast beam to column connection using billet connector and beam half joint subjected to reversible loading / Wan Norhasiah Wan Bidin” is a 2017 dissertation by Wan Norhasiah and Wan Bidin, published in University of Malaya Students Repository. OpenAlex counts 1 citations as of 22 November 2026. It is open access: the full text is free to read at University of Malaya Students Repository.

Citations
1
Most cited in
2025 (1)
References
14
Authors
2

Abstract

Precast beam to column connection is an important element in precast concrete structure, which has significantly influenced the overall structural performance. This connection is used to transfer the shear, bending moment and sometimes torsion between the precast components. This research is to determine the moment resistance and moment rotation characteristic of new proposed precast beam to column connection through three (3) full-scale experimental studies. The specimens used for the testing are similar in geometrical and material properties. From the moment rotation characteristic, it is possible to extract the rotational stiffness, moment capacity and ductility of the connection. The experimental results were validated with existing analytical methods and the connection classification is determined. It is found that the ultimate moment of the connection, MU is greater than the calculated moment resistance, MRC for all specimens with the average value of MU/MRC is 1.21. All the specimens failed beyond the beam-line which means that the connection has sufficient ductility and achieved required strength to be considered as a semi-rigid connection and might be considered as a fully rigid. Based on the connection classification system according to Monforton’s fixity factor, this connection falls in zone III, which is semirigid connection with medium strength. The analytical model overestimates the experimental results due to the omission of mechanical parts contribution such as the horizontal bolt, dowel and billet in calculating the rotation. For failure mechanism, all specimens exhibit plastic hinge formation in the beam at the column’s face which means that the ultimate moment resistance of the beam was reached.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Norhasiah, W., & Bidin, W. (2017). Full scale testing of precast beam to column connection using billet connector and beam half joint subjected to reversible loading / Wan Norhasiah Wan Bidin. University of Malaya Students Repository. http://studentsrepo.um.edu.my/8021/7/norhasiah.pdf

MLA 9

Norhasiah, Wan, and Wan Bidin. “Full scale testing of precast beam to column connection using billet connector and beam half joint subjected to reversible loading / Wan Norhasiah Wan Bidin.” University of Malaya Students Repository, 2017. http://studentsrepo.um.edu.my/8021/7/norhasiah.pdf.

Chicago

Norhasiah, Wan and Wan Bidin. 2017. “Full scale testing of precast beam to column connection using billet connector and beam half joint subjected to reversible loading / Wan Norhasiah Wan Bidin.” University of Malaya Students Repository. http://studentsrepo.um.edu.my/8021/7/norhasiah.pdf.

Harvard

Norhasiah, W. and Bidin, W. (2017) ‘Full scale testing of precast beam to column connection using billet connector and beam half joint subjected to reversible loading / Wan Norhasiah Wan Bidin’, University of Malaya Students Repository. Available at: http://studentsrepo.um.edu.my/8021/7/norhasiah.pdf.

IEEE

W. Norhasiah and W. Bidin, “Full scale testing of precast beam to column connection using billet connector and beam half joint subjected to reversible loading / Wan Norhasiah Wan Bidin,” University of Malaya Students Repository, 2017.

BibTeX

@phdthesis{norhasiah2017full,
  title     = {{Full scale testing of precast beam to column connection using billet connector and beam half joint subjected to reversible loading / Wan Norhasiah Wan Bidin}},
  author    = {Norhasiah, Wan and Bidin, Wan},
  year      = {2017},
  url       = {http://studentsrepo.um.edu.my/8021/7/norhasiah.pdf}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete

  • precast concrete
  • beam-column joints
  • rotational stiffness
  • flexural capacity
  • ductility
  • semi-rigid connections
  • plastic hinge
  • full-scale testing

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Norhasiah, W., & Bidin, W. (2017). Full scale testing of precast beam to column connection using billet connector and beam half joint subjected to reversible loading / Wan Norhasiah Wan Bidin. University of Malaya Students Repository. http://studentsrepo.um.edu.my/8021/7/norhasiah.pdf

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at University of Malaya Students Repository: sign in and open the PDF from this page.

Who wrote this paper?

Wan Norhasiah, Wan Bidin.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.