Journal article · 2026 · Open access

From native tomato cutin to branched polyesters: Structural insights from supercritical-water depolymerisation

Enkeledo Menalla, Rita Escórcio, Ana Isabel Quilez‐Molina, Cristina Silva Pereira, María José Cocero

Chemical Engineering Journal, 549, 181768 · Published 8 October 2026 · DOI 10.1016/j.cej.2026.181768

Open PDFView at the publisherCite this paper

In brief

“From native tomato cutin to branched polyesters: Structural insights from supercritical-water depolymerisation” is a 2026 journal article by Enkeledo Menalla and 4 co-authors, published in Chemical Engineering Journal. OpenAlex counts 1 citations as of 17 November 2026, which puts it in the top 9% of works published in 2026 by citations. It is open access under a CC BY licence: the full text is free to read at Chemical Engineering Journal.

Citations
1
Most cited in
2026 (1)
Field-weighted impact
2.76
References
59
Authors
5

Abstract

Cutin is the structural biopolyester that scaffolds the plant cuticle, forming a thermosetting matrix. It is insoluble in conventional solvents, chemically resilient and presents excellent barrier properties, preventing water loss, regulating gas permeability and protecting plants against environmental hazards. Conventional valorisation relies on batch processing with harsh chemicals that destroy the native architecture, yielding monomers rather than branched oligomers for polyester materials, and limiting mechanistic insight. Here we report a controlled depolymerisation strategy based on continuous supercritical-water hydrolysis that achieves complete solubilisation of the insoluble cutin network into soluble branched polyester oligomers (Mw ≈ 7.35 kDa) within 10.5 s of reaction time. Continued treatment further reduces Mw to ≈ 1.82 kDa at 120 s, approaching the limit of 24 h alkaline hydrolysis (≈ 1.22 kDa). Precise control of residence time reveals a hierarchical cleavage mechanism in which secondary esters at branching points hydrolyse preferentially over primary backbone esters. FTIR, NMR, GPC and GC–MS identify 10,16-dihydroxyhexadecanoic acid as the dominant monomeric unit and reveal 16-hydroxy-9Z-hexadecenoic acid as a novel SCW-specific product, consistent with a carbocation-driven dehydration pathway inaccessible under alkaline conditions. A structurally constrained network model depicts cutin as a heterogeneous crosslinked polyester dominated by 10,16-dihydroxyhexadecanoic acid, with glycerol as a branching node, C18 hydroxy acids and α,ω-diacids as linkers, and fatty acids as chain terminators. With an E -factor of 0.8 against 4.1 for alkaline hydrolysis, this process-intensified approach resolves the native architecture of cutin and establishes a scalable platform for plant polyester valorisation. Problem statement Cutin, considered the third most abundant biopolymer after cellulose and lignin, remains largely underutilised as a renewable polyester feedstock due to its highly cross-linked, insoluble structure, which severely limits processability and scalable valorisation [1] . Conventional depolymerisation strategies such as alkaline, acidic, or enzymatic hydrolysis rely on long reaction times, stoichiometric reagents, and multistep downstream processing [1] , [2] , leading to high material consumption, salt generation, and limited control over product characteristics. Although supercritical water presents a unique opportunity in biomass processing by functioning simultaneously as solvent and reaction medium [3] , its use for the depolymerisation of cutin into tunable polyester fractions remains largely unexplored. As a result, a critical gap exists in the development of fast, catalyst-free, and environmentally efficient processes capable of converting cutin-rich agro-industrial residues into functional polyester building blocks with defined molecular characteristics. Also, a data-driven model is proposed to infer representative structures of depolymerised products from experimental data.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Menalla, E., Escórcio, R., Quilez‐Molina, A. I., Pereira, C. S., & Cocero, M. J. (2026). From native tomato cutin to branched polyesters: Structural insights from supercritical-water depolymerisation. Chemical Engineering Journal, 549, 181768. https://doi.org/10.1016/j.cej.2026.181768

MLA 9

Menalla, Enkeledo, et al. “From native tomato cutin to branched polyesters: Structural insights from supercritical-water depolymerisation.” Chemical Engineering Journal, vol. 549, 2026, p. 181768. https://doi.org/10.1016/j.cej.2026.181768.

Chicago

Menalla, Enkeledo, Rita Escórcio, Ana Isabel Quilez‐Molina, Cristina Silva Pereira, and María José Cocero. 2026. “From native tomato cutin to branched polyesters: Structural insights from supercritical-water depolymerisation.” Chemical Engineering Journal 549: 181768. https://doi.org/10.1016/j.cej.2026.181768.

Harvard

Menalla, E. et al. (2026) ‘From native tomato cutin to branched polyesters: Structural insights from supercritical-water depolymerisation’, Chemical Engineering Journal, 549, p. 181768. doi:10.1016/j.cej.2026.181768.

IEEE

E. Menalla, R. Escórcio, A. I. Quilez‐Molina, C. S. Pereira, and M. J. Cocero, “From native tomato cutin to branched polyesters: Structural insights from supercritical-water depolymerisation,” Chemical Engineering Journal, vol. 549, p. 181768, 2026, doi: 10.1016/j.cej.2026.181768.

BibTeX

@article{menalla2026from,
  title     = {{From native tomato cutin to branched polyesters: Structural insights from supercritical-water depolymerisation}},
  author    = {Menalla, Enkeledo and Escórcio, Rita and Quilez‐Molina, Ana Isabel and Pereira, Cristina Silva and Cocero, María José},
  journal   = {Chemical Engineering Journal},
  year      = {2026},
  volume    = {549},
  pages     = {181768},
  doi       = {10.1016/j.cej.2026.181768},
  url       = {https://doi.org/10.1016/j.cej.2026.181768}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Life Sciences › Agricultural and Biological Sciences › Plant Science › Plant Surface Properties and Treatments

  • cutin
  • depolymerization
  • network models
  • process intensification
  • E-factor

Work with this paper

Most-cited papers in Agricultural and Biological Sciences

All highly cited Agricultural and Biological Sciences papers

Questions about this paper

How do I cite this paper in APA style?

Menalla, E., Escórcio, R., Quilez‐Molina, A. I., Pereira, C. S., & Cocero, M. J. (2026). From native tomato cutin to branched polyesters: Structural insights from supercritical-water depolymerisation. Chemical Engineering Journal, 549, 181768. https://doi.org/10.1016/j.cej.2026.181768

How many times has this paper been cited?

1 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Chemical Engineering Journal: sign in and open the PDF from this page.

Who wrote this paper?

Enkeledo Menalla, Rita Escórcio, Ana Isabel Quilez‐Molina, Cristina Silva Pereira, María José Cocero.

What is the DOI of this paper?

10.1016/j.cej.2026.181768, permanently at https://doi.org/10.1016/j.cej.2026.181768. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.