Journal article · 2013 · Open access
Frictional and Wear Behaviour of AlCrN, TiN, TiAlN Single-layer Coatings, and TiAlN/AlCrN, AlN/TiN Nano-multilayer Coatings in Dry Sliding
Procedia Engineering, 68, 512–517 · Published 1 January 2013 · DOI 10.1016/j.proeng.2013.12.214
In brief
“Frictional and Wear Behaviour of AlCrN, TiN, TiAlN Single-layer Coatings, and TiAlN/AlCrN, AlN/TiN Nano-multilayer Coatings in Dry Sliding” is a 2013 journal article by Willey Yun Hsien Liew and 5 co-authors, published in Procedia Engineering. OpenAlex counts 55 citations as of 17 November 2026, which puts it in the top 9% of works published in 2013 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at Procedia Engineering.
- Citations
- 55
- Most cited in
- 2025 (8)
- Field-weighted impact
- 12.16
- References
- 11
- Authors
- 6
Abstract
This paper examines the frictional and wear behaviour of AlCrN, TiN, TiAlN single-layer coatings, and TiAlN/AlCrN, AlN/TiN nano-multilayer coatings in dry sliding. Comparative studies on the coatings sliding in air and vacuum environment at different speeds provided important insight on the effect of oxidation and temperature on the frictional and wear behaviour of the coatings. Among all the single-layer coatings tested in vacuum, TiN gave the lowest coefficient of friction (COF), followed by TiAlN and AlCrN. This indicated that TiN was the most lubricous coating. At 10 m/min in ambient air in which oxidation took place, AlCrN gave the lowest COF, followed by TiN and TiAlN. Among the two types of nano-multilayer coatings tested in vacuum and air, the AlCrN/TiAlN produced lower COF. The characteristics of the COF produced by AlCrN/TiAlN and AlN/TiN in vacuum and air was similar to those produced by TiAlN and TiN, respectively. This showed that the COF of these nano-multilayer coatings was governed by TiAlN and TiN. AlCrN exhibited the highest wear resistance. TiAlN had the lowest wear resistance. TiN, TiAlN/AlCrN and AlN/TiN which exhibited similar wear resistance, had lower wear resistance than AlCrN but higher wear resistance than TiAlN. In air, increasing the speed from 10 m/min to 100 m/min resulted in a reduction in COF for all coatings, except AlCrN.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Liew, W. Y. H., Jie, J. L. L., Yan, L. Y., Dayou, J., Sipaut, C. S., & Bin Madlan, M. F. (2013). Frictional and Wear Behaviour of AlCrN, TiN, TiAlN Single-layer Coatings, and TiAlN/AlCrN, AlN/TiN Nano-multilayer Coatings in Dry Sliding. Procedia Engineering, 68, 512–517. https://doi.org/10.1016/j.proeng.2013.12.214
MLA 9
Liew, Willey Yun Hsien, et al. “Frictional and Wear Behaviour of AlCrN, TiN, TiAlN Single-layer Coatings, and TiAlN/AlCrN, AlN/TiN Nano-multilayer Coatings in Dry Sliding.” Procedia Engineering, vol. 68, 2013, pp. 512–517. https://doi.org/10.1016/j.proeng.2013.12.214.
Chicago
Liew, Willey Yun Hsien, Jester Ling Lih Jie, Lim Yee Yan, Jedol Dayou, Coswald Stephen Sipaut, and Mohd Faizah Bin Madlan. 2013. “Frictional and Wear Behaviour of AlCrN, TiN, TiAlN Single-layer Coatings, and TiAlN/AlCrN, AlN/TiN Nano-multilayer Coatings in Dry Sliding.” Procedia Engineering 68: 512–517. https://doi.org/10.1016/j.proeng.2013.12.214.
Harvard
Liew, W. Y. H. et al. (2013) ‘Frictional and Wear Behaviour of AlCrN, TiN, TiAlN Single-layer Coatings, and TiAlN/AlCrN, AlN/TiN Nano-multilayer Coatings in Dry Sliding’, Procedia Engineering, 68, pp. 512–517. doi:10.1016/j.proeng.2013.12.214.
IEEE
W. Y. H. Liew, J. L. L. Jie, L. Y. Yan, J. Dayou, C. S. Sipaut, and M. F. Bin Madlan, “Frictional and Wear Behaviour of AlCrN, TiN, TiAlN Single-layer Coatings, and TiAlN/AlCrN, AlN/TiN Nano-multilayer Coatings in Dry Sliding,” Procedia Engineering, vol. 68, pp. 512–517, 2013, doi: 10.1016/j.proeng.2013.12.214.
BibTeX
@article{liew2013frictional,
title = {{Frictional and Wear Behaviour of AlCrN, TiN, TiAlN Single-layer Coatings, and TiAlN/AlCrN, AlN/TiN Nano-multilayer Coatings in Dry Sliding}},
author = {Liew, Willey Yun Hsien and Jie, Jester Ling Lih and Yan, Lim Yee and Dayou, Jedol and Sipaut, Coswald Stephen and Bin Madlan, Mohd Faizah},
journal = {Procedia Engineering},
year = {2013},
volume = {68},
pages = {512--517},
doi = {10.1016/j.proeng.2013.12.214},
url = {https://doi.org/10.1016/j.proeng.2013.12.214}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2017 | 3 | |
| 2018 | 5 | |
| 2019 | 6 | |
| 2020 | 6 | |
| 2021 | 2 | |
| 2022 | 7 | |
| 2023 | 5 | |
| 2024 | 4 | |
| 2025 | 8 | |
| 2026 | 1 |
Its field-weighted citation impact is 12.16: it has been cited 12.16 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- AlCrN coating
- TiN coating
- TiAlN coating
- dry sliding wear
- friction coefficient
- wear resistance
- oxidation effects
- sliding speed effects
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Liew, W. Y. H., Jie, J. L. L., Yan, L. Y., Dayou, J., Sipaut, C. S., & Bin Madlan, M. F. (2013). Frictional and Wear Behaviour of AlCrN, TiN, TiAlN Single-layer Coatings, and TiAlN/AlCrN, AlN/TiN Nano-multilayer Coatings in Dry Sliding. Procedia Engineering, 68, 512–517. https://doi.org/10.1016/j.proeng.2013.12.214
How many times has this paper been cited?
55 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Procedia Engineering: sign in and open the PDF from this page.
Who wrote this paper?
Willey Yun Hsien Liew, Jester Ling Lih Jie, Lim Yee Yan, Jedol Dayou, Coswald Stephen Sipaut, Mohd Faizah Bin Madlan.
What is the DOI of this paper?
10.1016/j.proeng.2013.12.214, permanently at https://doi.org/10.1016/j.proeng.2013.12.214. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.