Journal article · 1997 · Open access
Friction and Wear Properties of DLC Films Deposited on Aluminum Alloy.
Journal of The Surface Finishing Society of Japan, 48(2), 213–218 · Published 1 January 1997 · DOI 10.4139/sfj.48.213
In brief
“Friction and Wear Properties of DLC Films Deposited on Aluminum Alloy.” is a 1997 journal article by Kei Demizu and 3 co-authors, published in Journal of The Surface Finishing Society of Japan. OpenAlex counts 3 citations as of 17 November 2026. It is open access: the full text is free to read at Journal of The Surface Finishing Society of Japan.
- Citations
- 3
- Most cited in
- 2016 (1)
- References
- 3
- Authors
- 4
Abstract
Hard diamond-like-carbon (DLC) films were deposited on aluminum alloy (JIS A6063) substrate by RF plasma CVD using CH4 and H2 as reactant gas. CH4 concentration, deposition time, and RF power were varied to determine preferable deposition conditions that would not cause undesirable softening of the substrate during the deposition process. The thickness of DLC film was about 4μm under conditions of gas pressure: 27Pa, CH4: 30%, RF power: 300W, and deposition time: 3h.Friction and wear experiments were conducted using a reciprocating friction and wear test apparatus. DLC film deposited under the above conditions was slid against bearing steel (JIS SUJ 2) balls to investigate fundamental friction and wear properties from room temperature to 200°C. The results were compared with those for substrate without the deposited DLC film. With the DLC film, friction and wear in the aluminum alloy were greatly reduced up to 100°C. The above results suggest that DLC film should improve the tribological performance of aluminum alloys used for sliding parts.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Demizu, K., Sone, T., ADACHI, K., & YOKOYAMA, Y. (1997). Friction and Wear Properties of DLC Films Deposited on Aluminum Alloy. Journal of The Surface Finishing Society of Japan, 48(2), 213–218. https://doi.org/10.4139/sfj.48.213
MLA 9
Demizu, Kei, et al. “Friction and Wear Properties of DLC Films Deposited on Aluminum Alloy.” Journal of The Surface Finishing Society of Japan, vol. 48, no. 2, 1997, pp. 213–218. https://doi.org/10.4139/sfj.48.213.
Chicago
Demizu, Kei, Takumi Sone, Kazutoshi ADACHI, and Yujiro YOKOYAMA. 1997. “Friction and Wear Properties of DLC Films Deposited on Aluminum Alloy.” Journal of The Surface Finishing Society of Japan 48 (2): 213–218. https://doi.org/10.4139/sfj.48.213.
Harvard
Demizu, K. et al. (1997) ‘Friction and Wear Properties of DLC Films Deposited on Aluminum Alloy.’, Journal of The Surface Finishing Society of Japan, 48(2), pp. 213–218. doi:10.4139/sfj.48.213.
IEEE
K. Demizu, T. Sone, K. ADACHI, and Y. YOKOYAMA, “Friction and Wear Properties of DLC Films Deposited on Aluminum Alloy.,” Journal of The Surface Finishing Society of Japan, vol. 48, no. 2, pp. 213–218, 1997, doi: 10.4139/sfj.48.213.
BibTeX
@article{demizu1997friction,
title = {{Friction and Wear Properties of DLC Films Deposited on Aluminum Alloy.}},
author = {Demizu, Kei and Sone, Takumi and ADACHI, Kazutoshi and YOKOYAMA, Yujiro},
journal = {Journal of The Surface Finishing Society of Japan},
year = {1997},
volume = {48},
number = {2},
pages = {213--218},
doi = {10.4139/sfj.48.213},
url = {https://doi.org/10.4139/sfj.48.213}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- diamond-like carbon films
- aluminum alloys
- friction reduction
- wear resistance
- tribological properties
- CH4/H2 plasma
- temperature dependence
- sliding wear
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Demizu, K., Sone, T., ADACHI, K., & YOKOYAMA, Y. (1997). Friction and Wear Properties of DLC Films Deposited on Aluminum Alloy. Journal of The Surface Finishing Society of Japan, 48(2), 213–218. https://doi.org/10.4139/sfj.48.213
How many times has this paper been cited?
3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Journal of The Surface Finishing Society of Japan: sign in and open the PDF from this page.
Who wrote this paper?
Kei Demizu, Takumi Sone, Kazutoshi ADACHI, Yujiro YOKOYAMA.
What is the DOI of this paper?
10.4139/sfj.48.213, permanently at https://doi.org/10.4139/sfj.48.213. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.