Journal article · 2013 · Open access

Friction and Wear Performance of Boundary-lubricated DLC/DLC Contacts in Synthetic base Oil

Hacı Abdullah Tasdemir, Takayuki TOKOROYAMA, Hiroyuki Kousaka, Noritsugu Umehara, Yutaka Mabuchi

Procedia Engineering, 68, 518–524 · Published 1 January 2013 · DOI 10.1016/j.proeng.2013.12.215

Open PDFView at the publisherCite this paper

In brief

“Friction and Wear Performance of Boundary-lubricated DLC/DLC Contacts in Synthetic base Oil” is a 2013 journal article by Hacı Abdullah Tasdemir and 4 co-authors, published in Procedia Engineering. OpenAlex counts 25 citations as of 17 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Procedia Engineering.

Citations
25
Most cited in
2018 (6)
Field-weighted impact
6.95
References
20
Authors
5

Abstract

The use of diamond-like carbon (DLC) coatings in engine components can be one of the potential solutions for automotive industry to improve fuel efficiency by controlling the friction and wear. The tribological behavior of various types of DLC coatings in liquid lubricated systems and their interaction with lubricants are needed for proper usage of these coatings. In this study, the friction and wear performance of four different DLC coatings in synthetic base oil polyalpha-olefin (PAO) were investigated using pin-on-disc tribometer under boundary lubricated condition. One hydrogen-free ta-C DLC, one hydrogenated a-C:H, one silicon doped a-C:H:Si and one chromium doped a-C:H:Cr were deposited on SUJ2 bearing steel pins and discs for this study. The structural, mechanical and topographical characterizations of these films were analyzed using Raman spectroscopy, Nano indenter and Atomic Force Microscopy (AFM). The results indicate that structure and doping elements greatly affect the tribological performance of DLC coatings. Ta-C coatings gave the lowest boundary friction, while Si-doped a-C:H:Si showed the highest boundary friction. Hydrogenated a-C:H coating exhibited the highest wear rate, but silicon and chromium incorporation in a-C:H coatings greatly increased the wear resistance. Cr-doped a-C:H:Cr showed the lowest wear rate, followed by Si-doped a-C:H:Si coating.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Tasdemir, H. A., TOKOROYAMA, T., Kousaka, H., Umehara, N., & Mabuchi, Y. (2013). Friction and Wear Performance of Boundary-lubricated DLC/DLC Contacts in Synthetic base Oil. Procedia Engineering, 68, 518–524. https://doi.org/10.1016/j.proeng.2013.12.215

MLA 9

Tasdemir, Hacı Abdullah, et al. “Friction and Wear Performance of Boundary-lubricated DLC/DLC Contacts in Synthetic base Oil.” Procedia Engineering, vol. 68, 2013, pp. 518–524. https://doi.org/10.1016/j.proeng.2013.12.215.

Chicago

Tasdemir, Hacı Abdullah, Takayuki TOKOROYAMA, Hiroyuki Kousaka, Noritsugu Umehara, and Yutaka Mabuchi. 2013. “Friction and Wear Performance of Boundary-lubricated DLC/DLC Contacts in Synthetic base Oil.” Procedia Engineering 68: 518–524. https://doi.org/10.1016/j.proeng.2013.12.215.

Harvard

Tasdemir, H. A. et al. (2013) ‘Friction and Wear Performance of Boundary-lubricated DLC/DLC Contacts in Synthetic base Oil’, Procedia Engineering, 68, pp. 518–524. doi:10.1016/j.proeng.2013.12.215.

IEEE

H. A. Tasdemir, T. TOKOROYAMA, H. Kousaka, N. Umehara, and Y. Mabuchi, “Friction and Wear Performance of Boundary-lubricated DLC/DLC Contacts in Synthetic base Oil,” Procedia Engineering, vol. 68, pp. 518–524, 2013, doi: 10.1016/j.proeng.2013.12.215.

BibTeX

@article{tasdemir2013friction,
  title     = {{Friction and Wear Performance of Boundary-lubricated DLC/DLC Contacts in Synthetic base Oil}},
  author    = {Tasdemir, Hacı Abdullah and TOKOROYAMA, Takayuki and Kousaka, Hiroyuki and Umehara, Noritsugu and Mabuchi, Yutaka},
  journal   = {Procedia Engineering},
  year      = {2013},
  volume    = {68},
  pages     = {518--524},
  doi       = {10.1016/j.proeng.2013.12.215},
  url       = {https://doi.org/10.1016/j.proeng.2013.12.215}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201511
201644
201866
201933
202011
202144
202211
202322
202433

Its field-weighted citation impact is 6.95: it has been cited 6.95 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • diamond-like carbon films
  • boundary lubrication
  • friction
  • wear resistance
  • synthetic base oils
  • hydrogenated amorphous carbon
  • silicon doping
  • chromium doping

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Tasdemir, H. A., TOKOROYAMA, T., Kousaka, H., Umehara, N., & Mabuchi, Y. (2013). Friction and Wear Performance of Boundary-lubricated DLC/DLC Contacts in Synthetic base Oil. Procedia Engineering, 68, 518–524. https://doi.org/10.1016/j.proeng.2013.12.215

How many times has this paper been cited?

25 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Procedia Engineering: sign in and open the PDF from this page.

Who wrote this paper?

Hacı Abdullah Tasdemir, Takayuki TOKOROYAMA, Hiroyuki Kousaka, Noritsugu Umehara, Yutaka Mabuchi.

What is the DOI of this paper?

10.1016/j.proeng.2013.12.215, permanently at https://doi.org/10.1016/j.proeng.2013.12.215. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.