Journal article · 2012 · Open access

Frequency tuning of piezoelectric energy harvesters by magnetic force

Waleed Al-Ashtari, Matthias Hunstig, Tobias Hemsel, Walter Sextro

Smart Materials and Structures, 21(3), 035019 · Published 17 February 2012 · DOI 10.1088/0964-1726/21/3/035019

Open PDFView at the publisherCite this paper

In brief

“Frequency tuning of piezoelectric energy harvesters by magnetic force” is a 2012 journal article by Waleed Al-Ashtari and 3 co-authors, published in Smart Materials and Structures. OpenAlex counts 130 citations as of 22 November 2026. It is open access: the full text is free to read at Smart Materials and Structures.

Citations
130
Most cited in
2017 (19)
Field-weighted impact
14.71
References
15
Authors
4

Abstract

A piezoelectric energy harvester is an electromechanical device that converts ambient mechanical vibration into electric power. Most existing vibration energy harvesting devices operate effectively at a single frequency only, dictated by the design of the device. This frequency must match the frequency of the host structure vibration. However, real world structural vibrations rarely have a specific constant frequency. Therefore, piezoelectric harvesters that generate usable power across a range of exciting frequencies are required to make this technology commercially viable. Currently known harvester tuning techniques have many limitations, in particular they miss the ability to work during harvester operation and most often cannot perform a precise tuning. This paper describes the design and testing of a vibration energy harvester with tunable resonance frequency, wherein the tuning is accomplished by changing the attraction force between two permanent magnets by adjusting the distance between the magnets. This tuning technique allows the natural frequency to be manipulated before and during operation of the harvester. Furthermore the paper presents a physical description of the frequency tuning effect. The experimental results achieved with a piezoelectric bimorph fit the calculated results very well. The calculation and experimental results show that using this tuning technique the natural frequency of the harvester can be varied efficiently within a wide range: in the test setup, the natural frequency of the piezoelectric bimorph could be increased by more than 70%.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Al-Ashtari, W., Hunstig, M., Hemsel, T., & Sextro, W. (2012). Frequency tuning of piezoelectric energy harvesters by magnetic force. Smart Materials and Structures, 21(3), 035019. https://doi.org/10.1088/0964-1726/21/3/035019

MLA 9

Al-Ashtari, Waleed, et al. “Frequency tuning of piezoelectric energy harvesters by magnetic force.” Smart Materials and Structures, vol. 21, no. 3, 2012, p. 035019. https://doi.org/10.1088/0964-1726/21/3/035019.

Chicago

Al-Ashtari, Waleed, Matthias Hunstig, Tobias Hemsel, and Walter Sextro. 2012. “Frequency tuning of piezoelectric energy harvesters by magnetic force.” Smart Materials and Structures 21 (3): 035019. https://doi.org/10.1088/0964-1726/21/3/035019.

Harvard

Al-Ashtari, W. et al. (2012) ‘Frequency tuning of piezoelectric energy harvesters by magnetic force’, Smart Materials and Structures, 21(3), p. 035019. doi:10.1088/0964-1726/21/3/035019.

IEEE

W. Al-Ashtari, M. Hunstig, T. Hemsel, and W. Sextro, “Frequency tuning of piezoelectric energy harvesters by magnetic force,” Smart Materials and Structures, vol. 21, no. 3, p. 035019, 2012, doi: 10.1088/0964-1726/21/3/035019.

BibTeX

@article{alashtari2012frequency,
  title     = {{Frequency tuning of piezoelectric energy harvesters by magnetic force}},
  author    = {Al-Ashtari, Waleed and Hunstig, Matthias and Hemsel, Tobias and Sextro, Walter},
  journal   = {Smart Materials and Structures},
  year      = {2012},
  volume    = {21},
  number    = {3},
  pages     = {035019},
  doi       = {10.1088/0964-1726/21/3/035019},
  url       = {https://doi.org/10.1088/0964-1726/21/3/035019}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
20171919
201855
20191313
202099
202166
202255
20231111
20241212
202599
202644

Its field-weighted citation impact is 14.71: it has been cited 14.71 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Innovative Energy Harvesting Technologies

  • piezoelectric energy harvesting
  • vibration energy harvesting
  • frequency tuning
  • tunable resonant frequency
  • magnetic force
  • permanent magnets
  • piezoelectric bimorph
  • natural frequencies

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Al-Ashtari, W., Hunstig, M., Hemsel, T., & Sextro, W. (2012). Frequency tuning of piezoelectric energy harvesters by magnetic force. Smart Materials and Structures, 21(3), 035019. https://doi.org/10.1088/0964-1726/21/3/035019

How many times has this paper been cited?

130 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Smart Materials and Structures: sign in and open the PDF from this page.

Who wrote this paper?

Waleed Al-Ashtari, Matthias Hunstig, Tobias Hemsel, Walter Sextro.

What is the DOI of this paper?

10.1088/0964-1726/21/3/035019, permanently at https://doi.org/10.1088/0964-1726/21/3/035019. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.